Professional Documents
Culture Documents
Futurepath LSZH: Microtechnology
Futurepath LSZH: Microtechnology
FUTUREPATH LSZH
• LSZH: Low Smoke Zero Halogen
• Very low smoke generation for better visibility
• MicroDucts available from 5mm to 27mm and factory bundled
with an oversheath
• Multiple pathways for one installation cost, allows flexibility and
future growth
• No special tools or equipment needed; installation uses the same
as traditional conduit or innerduct
• Choose the correct MicroDuct size based on the Outer Diameter
(OD) of desired MicroCable. Dura-Line recommends a fill ratio of
50% to 75% for optimal cable placement performance. Several
factors impact jetting distance, including the condition of route,
bends, and equipment
STANDARD
DL.FP-LSZH.12.2020
MICROTECHNOLOGY
Nom OD
Rip Cord x2
Nom OD
MicroDuct
Diameter
Rip Cord x2
MicroDuct x3
Oversheath
Oversheath
Rip Cord x2
FUTUREPATH LSZH 2-WAY TECHNICAL SPECIFICATIONS
Nom OD
OVER- BEND BEND
MICRODUCT MICRODUCT NOM OD WEIGHT SWPS†
(#/FT)Oversheath
SHEATH RADIUS RADIUS
SIZE (MM) MIN ID (MM/IN) (IN) (LBS)
(IN) SUP* (IN) UNSUP* (IN)
Micro
5/3.5 3.4/0.13 0.46 0.03 0.03 4 7 124
Ove
8.5/6 5.9/0.23 0.77 0.05 0.088MicroDuct7x4 11 354
MicroDuct
* Unsupported Bend Radius guidelines should be followed during the installation process. The Supported Bend Radius are post-installation measurements.
† Safe working pull strength is calculated at 80% of tensile or breaking strength x12
Mi
Oversheath
Rip Cord x2
Ov
Rip Cord x2
Nom OD
+1 800 847 7661
WWW.DURALINE.COM
DL.FP-LSZH.12.2020
MICROTECHNOLOGY
Rip Cord x2
Nom OD
MicroDuct
Rip Cord x2
MicroDuct x3
Oversheath
Oversheath
Rip Cord x2
Nom OD
Oversheath
FUTUREPATH LSZH 3-WAY TECHNICAL SPECIFICATIONS
MICRODUCT MicroDuct
BENDx7 BEND
MICRODUCT NOM OD OVERSHEATH WEIGHT SWPS†
MIN ID RADIUS RADIUS
SIZE (MM) (IN) (IN) (#/FT) (LBS)
(MM/IN) SUP* (IN) UNSUP* (IN)
Oversheath
5/3.5 MicroDuct x4
3.4/0.13 0.48 0.04 0.048 7 11 194
Rip Cord x2
16/13 12.8/0.50 1.49 0.07 0.287 13 26 751
* Unsupported Bend Radius guidelines should be followed during the installation process. The Supported Bend Radius are post-installation measurements.
Nom OD † Safe working pull strength is calculated at 80% of tensile or breaking strength
Nom OD
MicroDuct
x12
MicroDuct
x19
Oversheath
ord x2
Oversheath
Rip Cord x2
Nom OD
DL.FP-LSZH.12.2020
Nom OD
Rip Cord x2
Nom OD
MICROTECHNOLOGY MicroDuct
Diameter
MicroDuct x3
Oversheath
Oversheath
Rip Cord x2
Nom OD
Oversheath
MicroDuct x4
Nom
OD
Rip Cord x2
MicroDuct
x24
+1 800 847 7661
WWW.DURALINE.COM Rip cord x2
Oversheath
DL.FP-LSZH.12.2020
Rip Cord x2
Nom OD
MicroDuct
iameter MICROTECHNOLOGY
MicroDuct x3
Oversheath
Oversheath
Rip Cord x2
Nom OD
Oversheath
MicroDuct x7
Oversheath
MicroDuct x4
Nom
OD
Rip Cord x2
Nom OD
FUTUREPATH LSZH 7-WAY TECHNICAL SPECIFICATIONS
Nom OD
MicroDuct
MICRODUCT BEND BEND
MICRODUCT NOM OD OVERSHEATH WEIGHT SWPS†
MINx12
ID RADIUS RADIUS
SIZE (MM) (IN) (IN) (#/FT) (LBS)
(MM/IN) SUP* (IN) UNSUP* (IN)
* Unsupported Bend Radius guidelines should be followed during the installation process. The Supported Bend Radius are post-installation measurements.
† Safe working pull strength is calculated at 80% of tensile or breaking strength
Rip Cord x2
Nom OD
MicroDuct
x24
Rip cord x2 +1 800 847 7661
Oversheath WWW.DURALINE.COM
DL.FP-LSZH.12.2020
Oversheath
MICROTECHNOLOGY MicroDuct x4
Rip Cord
Nom OD
Nom OD
MicroDuct
x12
Oversheath
Rip Cord x2
* Unsupported Bend Radius guidelines should be followed during the installation process. The Supported Bend Radius are post-installation measurements.
† Safe working pull strength is calculated at 80% of tensile or breaking strength
MicroDuct
x24
Rip cord x2
Oversheath
DL.FP-LSZH.12.2020
Oversheath
MicroDuct x4
Nom
OD
MICROTECHNOLOGY
Nom OD
Nom OD
MicroDuct
x12
MicroDuct
x19
Oversheath
Rip Cord x2
Oversheath
Rip Cord x2
Nom OD
FUTUREPATH LSZH 19-WAY TECHNICAL SPECIFICATIONS
* Unsupported Bend Radius guidelines should be followed during the installation process. The Supported Bend Radius are post-installation measurements.
MicroDuct
† Safe working pull strength is calculated at 80% of tensile or breaking strength
x24
Rip cord x2
Oversheath
DL.FP-LSZH.12.2020
Oversheath
MICROTECHNOLOGY
Nom OD
MicroDuct
x24
Rip cord x2
Oversheath
* Unsupported Bend Radius guidelines should be followed during the installation process. The Supported Bend Radius are post-installation measurements.
† Safe working pull strength is calculated at 80% of tensile or breaking strength
DL.FP-LSZH.12.2020