Professional Documents
Culture Documents
EN
SYSTEMSCATALOGUE
EN Fire Detection Systems
HOCHIKI OFFICES AROUND THE WORLD
(from Left to Right)
HOCHIKI MEXICO
E: jbravo@hochiki.com
www.hochikiamerica.com
HOCHIKI ITALIA
E: info@hochiki.it
www.hochiki.it
HOCHIKI CORPORATION
E: overseas@hochiki.co.jp
www.hochiki.co.jp
2
World Class Leaders
in Life Safety Since 1918
Hochiki has a distinguished heritage of specialist technological expertise which has
gained the group its international status as one of the world’s leading manufacturers of
commercial and industrial fire detection solutions. Established early in the twentieth
century, Hochiki has remained an independent, multi-national company which now
employs over 1500 personnel in total, operating five manufacturing plants, thirty-one
sales offices and eighteen subsidiaries.
Hochiki Europe (UK) Ltd manufactures and distributes product for Europe, the Middle
East, CIS, Indian Sub-Continent and Africa and is dedicated to providing sales and
technical services to these markets.
In addition, the Group employs over 100 specialist research and development engineers
that undertake activities from fundamental research into the physical properties of fire,
to hardware and software product design and development.
3
Delivery Quality Useful Contact Information
Acknowledged globally by system specifiers and integrators as an Hochiki Middle East FZE
international market leader in the manufacture of fire products, the main Office No. C-205
benefits of using Hochiki devices are:
HQ Building
f
fHigh quality of products ensure long term reliability Dubai Silicon Oasis
f
fEasy to install PO Box 341415
f
fOpen Protocol for choice and flexibility Dubai
f
fReduced cost of ownership UAE
f
fVirtual elimination of false alarms
+971 4372 4130
f
fCompliance to standards
+971 4372 4131
Types of Fire Detection System sales@hochiki.ae
Hochiki offers many types of fire detection system; this includes the ESP www.hochiki.ae
intelligent analogue addressable fire alarm system, the CDX conventional
system and FIREwave, a hybrid wired/wireless system These ranges are
supplemented by a large selection of ancillary and test equipment.
Intelligent Fire Alarm Control Panels Power Supplies FIREwave Translator & Expander 64
FIREwave Modules 65
Overview 6 Power Supplies 40 FIREwave Sensors 65
Control Panels 8 FIREwave Audio/Visual 66
Repeaters 10 ESPintelligent
Virtual Resource 12 Analogue Addressable Fire Detection FIRElink
Sensors 43 Air Sampling System
Configuration Software 14
Network Diagram 16 Bases 44 FIRElink Detectors 69
Beams 44 FIRElink Accessories 69
Audio/Visual 45
Modules 47
ANCILLARY
Manual Call Points 49
Equipment
Intelligent Fire Alarm Control Panels
Ancillaries 72
Control Panels 18
CDXconventional Test Equipment 72
Conventional Fire Detection Power Supplies 74
Repeaters 20
Detectors 52 Enclosures 75
Control Marine Control Panels 24
Beam Detectors 54
Network Diagram 26
Bases 54
BEACON VARIANTS
Audio/Visual 55
Guides to our EN54-23 A/V Range
Manual Call Points 57
Sounder Beacons 78
Conventional Beacons 79
Conventional Fire Alarm Control Panels CDX Ceiling Beacons 80
Intrinsically Safe & Explosion Proof Wall Beacons 81
Control Panels 28
Detectors 60
Network Diagram 30
Bases 60
Manual Call Points 60
Modules 61
Infrared Flame Detection 62
Conventional Extinguishant Control Panels
Control Panels 32
Network Diagram 38
The all new L@titude product range of fire alarm control equipment
combines the very latest hardware and software to produce a
control and indication system, which is powerful and sophisticated,
yet simple to use and understand.
www.hochikieurope.com/latitude
Overview
The all new L@titude product range of fire alarm control equipment combines the very latest By taking advantage of the unique user interface it is possible to further customise the control
hardware and software to produce a control and indication system, which is powerful and panel so it can meet specific alternative requirements such as local regional variances,
sophisticated, yet simple to use and understand. alternative additional functionality or corporate livery. Although this level of customisation is not
generally a user feature, the architecture of the L@titude control system makes customisation
The flexibility of the L@titude platform is such that it can be re-configured to realise many other
almost limitless.
control and indication applications, with direct integration into intelligent buildings.
Moving away from the simple, price driven competitive model used by most manufacturers
today, the l@titude concept is designed to add value to System Designer, Integrator, Service
provider and the end user.
Developed from the “ground up” by Hochiki’s leading design team and using some of the most
advanced technology available, L@titude is designed as one of the most powerful, intelligent
and technically robust fire alarm products available.
Not only do the products and services offered under the L@titude brand provide solutions to
the most technically challenging applications in life safety, L@titude will deliver added value,
market advantage and a competitive edge to your business.
The modular nature of the L@titude system allows all field wiring to be connected to a passive
mother board enabling addition, re-configuration or replacement of all electronic hardware
without the need to disconnect any field wiring.
This modularity also allows each panel to be customised with addressable loop detection circuits,
conventional detection circuits, relay cards, additional sounder outputs or programmable I/O
modules as required.
Each 2 loop module slot can be fitted with a variety of option boards to provide alternative
functionality. These modules include:
f zone conventional detection board
f8
f way sounder output board
f4
f way volt free relay contact board
f8
f channel programmable I/O board with digital inputs and open collector outputs
f16
f
fMedia Gateway communications board
f
fL@titude “Bridge” Network Card (connect L@titude to your existing HFP network)
7
Selection of I/O Boards
With the increasing demands for power in fire detection and alarm systems, L@titude Fire control Adding a L@titude “Bridge” Network Card to your L@titude Panel or L@titude Network provides
panels are well placed to meet current and future needs. an interface between existing HFP and L@titude Control System providing backward compatibility
and a unique upgrade path.
All panels are available with either a 5.25A, 24V power supply capable of charging up to 26Ah
batteries or a 10.25A, 24V power supply capable of charging up to 45Ah batteries. L@titude
Fire Panels can be supplied with a range of remote power supply units making the control panel Features
smaller and easier to install. f
fCompliant with EN54-2, EN54-4
Up to 500 milliamps is available for each detection loop allowing for a generous quantity of loop f to 8 loop or 2 to 16 loop versions
f2
powered devices. f
f500mA loop current
The four sounder circuits are each capable of supplying up to 2.5A at 24V to audio and audio f programmable sounder circuits each rated at 2.5 A
f4
visual devices (PSU dependant). f
f5.25 A or 10.25 A, power supply options
The addition of a L@titude Media Gateway communications device configured to report to f programmable inputs
f3
the Virtual Resource servers and subscription to one or more Virtual Resource browser based f programmable relay outputs
f5
software modules, allows systems to be managed remotely and from any location in a simple f
fHard wired fire and fault routing inputs and outputs
and efficient manner. f
fModular electronics
L@titude Media Gateway also provides the interface between control systems and other f
fOver 4000 sub address points per panel
products and utilities such as PC graphics, Voyage State Recorder and a growing number of third f
fOption to “invert” inputs and outputs
party L@titude compatible products.
f
fPowerful, standard configuration templates
Configurable serial ports will allow connection to BMS systems using LonWorks, Modbus or f
fNetwork up to 128 panels
BACnet protocols.
f
fConfigurable via USB port to PC or memory stick
L@titude fire systems are scalable with L@titude Net Enhances High Speed Networking. This f ancillary serial ports
f2
allows up to 128 panels to be connected together as a fully fault tolerant networked system with
f to 512 programme Input/ Output via optional u plug in and serially
fUp
rapid inter panel communications and up to 1.2km of standard two core fire resistant cabling
connected expansion cards
between nodes.
Each panel can be configured to display all or any events from any other panel allowing master/
slave, multiple master/slave or peer to peer configuration.
Sophisticated network analysis tools provide the ability to identify connection problems instantly
and the commissioning mode allows individual panels to be prevented from transmitting events
to the network while maintaining communications.
9
L@titude Network Card
L@titude provides a means of allowing full display and optional control of the L@titude fire Features
alarm control panel from a small and unobtrusive local control station.
f
fRobust, full colour, 7” 800 x 480 touch screen graphical display
Based on an all new hardware and software platform, the large, full colour graphical display with f
fFull indication of all information displayed at the fire control panel
touch screen functionality, delivers information on the status of the fire alarm system to single
f
fAutomatic display brightness adjustment
or multiple locations.
f
f(Silenceable) internal sounder
L@titude repeaters can be configured to offer full display and control to replicate the functionality
f
fConnections Via:
of the fire control panel or to operate as a simple, display only device for applications where
access to control the fire alarm system would be inappropriate. ff Option to connect to control panel network
f
fLow current, 24 VDC powered
For other annunciation and control applications, L@titude can be configured to provide
customisable switches and indications for a host of fire system ancillary functions. f
fSlim compact construction
f
fConfigurable functionality
L@titude repeaters may be connected to the fire control panels’ fault tolerant network using fire f
fConfigurable languages
rated cable offering flexibility in system wiring.
f
fOptional Enable Key-switch
Available in several standard formats, L@titude can be mounted directly onto a wall, be recessed
using our quick-fix adaptor frame or fully flush mounted. Special enclosure finish and colours are
also available to match existing decor.
11
L@titude Virutal Resource
Virtual Resource
A Comprehensive Suite of Software Based Tools
To compliment the new, market leading range of control systems. Virtual Resource is a Print
unique suite of software tools aimed to deliver a whole new dimension in Life Safety System
Designed to replace panel mounted printers which provide very limited information. VR Print
Management. It provides System Designers Integrators and Service Companies with the ability
provides a secure method of storing and recalling the control system. The suer can simply view
to remotely access and comprehensively manage any system using intelligent analysis of data
the systems events online, print PDF reports or download the data.
collected from those systems. End-users and facilities managers can also greatly benefit from
the powerful feature set that comes with Virtual Resource. Virtual Resource is one of the most
technically advanced management tools for fire detection and other safety systems on the
Features
market. With Virtual Resource, installers and service provides are able to offer market leading f
fUnique Life Safety management utility
functionality through remote management and provide improved service at lower cost and f
fRemote access to system data from anywhere
greater efficiency. The remote management features offered by Virtual Resource can result in f
fRevenue driver for all business sizes
reduced fault call outs, improved servicing regimes, more effective maintenance, reduction of
f costs and rise up productivity
fCut
unwanted alarms and improved overall service to the end user.
f
fReduce environmental impact through technology
Access f
fModular application based tool set:
Gain access to data from all of your systems, assess performance, check status and make ff VR Access: View and manage my projects
decisions based on facts, not assumptions. VR Access allows a Virtual Resource enabled fire ff VR Vault: Store and retrieve system documentation
system to periodically report its status to the secure servers and allows a VR Access subscriber
ff VR Service: Manage, add value and Improve compliance
to view the latest status report via any web enable device.
ff VR Print: Virtual Printer
Vault f
fMore to come...
Subscribers to Virtual Resource can securely store system and site related documentation on our More VR applications will be added to the list providing users with
permanently backed up servers using VR Vault. VR Vault provides a convenient and permanently further enhancement to their value and revenue streams
accessible storage location for all documentation related to an installation including installation
drawings, commissioning details and certificates, service and maintenance records, general
notes and any other documents related to the installed system that the user requires.
Services
VR Service provides a means to set up a comprehensive fire alarm system servicing regime
adding benefit to both the end customer and Service company. Site details can be imported
from VR Access or added and set up manually to create customer records. Service frequency and
device activation list schedules can be set and resources allocated including travelling time and
estimated time to complete the service providing essential data for planning service engineer
‘s activities. Service engineers can view and print their work schedules including site specific
notes and previous service records directly from the system if required.
13
L@titude Configuration Software
Configure
Loop Explorer 2 (LE2) Configuration Software
To compliment the new, market leading range of control systems. Virtual Resource is The For added convenience, L@titude Virtual Resource subscribers can store HFP Loop Explorer 2
powerful central processor and extensive on board expandable memory in the L@titude Fire configuration files on our secure servers ensuring that the site configuration is always backed
control system, allows demanding configuration options and many thousand of cause and up and available to users with the appropriate access rights.
effects to be processed quickly and efficiently.
Features
Logical operators such as COINCIDENCE, AND, OR, NOT, TIME OF DAY and INTERVAL TIME along f
fBased on the industry leading HFP Loop Explorer
with the ability to group inputs and outputs into collections other than zones and the capability
f
fDelivered and managed via the new L@titude.com website
to configure up to 2000 zones produces a system capable of fulfilling in the most demanding of
control applications. f more out of date version in circulation
fNo
f
fMany new features and benefits
A standard USB port allows configurations stored on a USB memory stick to be loaded to the
control panel without the use of a PC. ff Time Manager
ff Group Manager
The HFP Loop Explorer 2, PC configuration software provides a familiar, simple to use PC
application with the power to produce the most complex configurations via an easy to use and f to 5000 Cause and Effect options
fUp
intuitive interface. f
fAdditional C & E operators
Maintain the look and feel of the industry leading original HFP Loop Explorer 1 configuration f
f“Not” and Time
utility, HFP Loop Explorer 2 is itself highly configurable allowing customisation of languages, f
fPowerful templates
colour schemes and company logos and allowing exposure to single or multiple detector f
fFavourite device tab
protocols to be set for each user.
f
fLanguage support
Additional logical operations for NOT and TIME functions for use in cause and effects and the
inclusion of “groups” (collections of devices not necessarily in the same zone) increase the power
and flexibility of HFP Loop Explorer 2 to far beyond what was achievable with its forerunner and
most other products currently on the market.
Powerful standard templates allow rapid configuration of common fire system configurations for
applications such as high rise buildings or alarm verification from hotel rooms.
Cause and effect processing power is now practically limitless allowing the configuration of
large, complex networks with ease. Access to HFP Loop Explorer 2 is via a secure web server,
so users with the appropriate credentials have permanent access to the latest version ensuring
that the most recent enhancements are always available. HFP Loop Explorer 2 can be customised
by the user so that language or specific terminology can be set as defaults for all systems that
are configured using HFP Loop Explorer 2. Custom changes are stored on our servers, once more
ensuring that all authorised users have access to the latest customised versions.
15
L@ti-View
L@ti-View
Powerful and Sophisticated Software Solution
No situation requires a more urgent response than a fire event. On a large public site, Flexibility
especially during busy periods, public safety is paramount. L@ti-View enables permissions to be given to users. There are four default user accounts
A powerful and sophisticated software solution, L@ti-View gives building managers configured upon installation. Additional accounts can be created by the administrator.
complete monitoring and control over fire detection, providing a comprehensive fire These user accounts use default permissions groups, but user accounts and groups can
risk and incident management system. Where time is of the essence, site managers be cloned and edited to suit site requirements.
can respond quickly and efficiently to a fire event. L@ti-View plays a crucial role in
safeguarding people, vitally important information and property. Features
f
fSupports dual screens, allowing a dedicated screen for the 2D location images and a
Visual Fire Management separate screen for listing active events and system management.
L@ti-View can automatically switch to the area on the site map to where a fire device has f
fFully configurable on site using administrator login.
been activated to quickly view an event and begin immediate investigation. In addition,
it will show the relevant muster and fire control points. f
fReports configuration mismatch errors – ensuring that the graphics system is properly
maintained and updated whenever there are any panel configuration revisions.
It also provides a full capability to monitor a Fire Alarm System for faults and alarms and
f
fPowerful event log filtering and reporting.
allows the operator to easily manage a fire incident.
f
fManage the state of the fire system using a combination of graphical images and
Immediate Response system controls.
With L@ti-View, operators and users are alerted to an event as soon as it occurs and are f
fProgrammable macro buttons to perform panel control operations.
directed to the location of the event.
f
fFull map navigation using configurable buttons or map areas.
For all fire devices on the site, a maintainer’s log shows operators and engineers a view
of all recorded maintenance activities, previous faults and status histories to help speed
up maintenance procedures and device checks.
17
Network Diagram L@titude
2-16 Loop Analogue
Addressable Control Panel
High Integrity Configurable Network
Connection to
BMS systems using
LonWorks, Modbus or
BACnet protocols*
24V DC
Loop 3 - Loop 8
VR Service
Complete service management
utility with autodata transfer
VR Print
Eliminates need for panel
mounted printers
Loop 2
Loop 1
18 *Third party integration, please contact a team member for more information.
L@titude
2-16 Loop Analogue
Addressable Control Panel
<
IO Cards
L@titude L@titude L@titude L@titude
16 Channel I/O Board 8 Way Relay Board 8 Way Conventional 4 Way Sounder Board
Zone Board
L@titude Vision
Configurable Fire Alarm
Repeater
Loop 3 - Loop 8
Loop 2
Loop 1
L@titude
2-16 Loop Analogue
Addressable Control Panel
19
Selection of I/O boards
HFP AP-AS
AP-AS
Analogue Addressable 1-2 Loop Control Panels
The HFP AP-AS is a powerful and versatile Single or Two Loop Analogue Addressable Fire Housed in the same installer-friendly and attractively styled enclosure as the popular HFP CP
Control Panel. (Conventional) and HFP CP-XT (Extinguishant) range of fire control panels, HFP AP-AS combines
compact and practical styling with the programming power and connectivity normally associated
HFP AP-AS supports Hochiki ESP loop drivers, which are all capable of providing up to 400
with much larger systems.
milliamps of loop current for the most demanding applications.
An integral 3 Amp power supply and temperature compensated battery charger provides ample Features
power for the two, 1 Amp rated standard sounder outputs, loop powered sounders and other
f zonal LED indicators
f16 f
fSensitivity adjustment and Drift Compensation
devices.
f programmable sounder circuits
f2 f
fCompatible with HFP and HFP AP-CRL
HFP AP-AS is also available as a HFP AP-ASL version offering a very cost effective solution for repeaters*
f programmable relays
f3
smaller standalone installations requiring only one detection loop.
f power supply
f3A f
fCan be networked with HFP - control panels *
THE HFP AP-ASL version does not support the following: Second loop, Printer output, Networking
f
fLarge graphic display f
fFully EN54-2 and EN54-4 compliant
and connection of I/O boards or the HFP AP-CRL repeater.
improved front loading Printer option* **
f
fExpandable from 1 to 2 loops*
Connectivity f
fPowerful, network wide cause & effects*
f
fCertified to EN54-2/ EN54-4
HF AP-AS connects seamlessly to other HFP AS, or HFP multi loop panels and repeaters via f to 512 additional programmable I/O via
fUp
the fully fault tolerant and robust HFP network. The HFP AP-AS supports all HFP serial bus HFP I/O modules*
peripherals such as HFP AP-CRL repeaters, 16 channel I/O boards, Relay boards, Sounder boards
f
fStores 500 last events in event log
and Conventional Zone boards to provide an additional 512, fully programmable points. 16
f
fDial up modem connection available
zonal LED indicators are provided as standard and the panel will support up to 500 network wide
software zone as per HFP multi loop panels. f
fCompact, stylish enclosure
f
fDifferent language and character set
Software variants available
Programming, including powerful cause and effect functionality can be achieved using the f
fReal time clock
intuitive HFP loop Explorer configuration utility familiar to HFP panels users. The new HFP Loop f programmable inputs
f5
Explorer 2 will also support all of the HFP AP product family.
f
fInstaller friendly, removable equipment
The Guide graphics system or a modem for remote3 system interrogation by telephone lines may chassis
also be connected to HFP AS Panels via the RS232 serial connection.
Installation
The elegant and simple construction of the panel enables the chassis to be completely dismantled
by removing just two screws. The outer cover can also be detached by removing two hinge pins
making first fix installation very simple and enabling the sensitive electronic parts to be stored
safely for re-fitting at the commissioning stage.
*These items not available on HFP ASL panel. ** Can be fitted to M3 size enclosure only 21
HFP AP-CRLS
Repeater
Analogue Addressable Fire Control Panel Repeater
HFP AP-CRLS
Local LCD Control Repeater
The HFP AP-CRLS fire alarm repeater provides an alternative to HFP AP-PRNS network connected
repeaters and provides a cost effective, simple and convenient method of extending the controls
and indications of the HFP fire alarm control panel to other locations.
The larger, graphic LCD, brightness LED indicators and full set of controls duplicate the indications
and controls on the HFP fire alarm control panel at up to 15 additional locations via a (separate to
the HFP network) simple, two wire serial data connection.
Ideal for locations where a control and indication point smaller than a full fire alarm control
panel is required the HFP AP-CRLS is available in either a 24 VDC powered option (which can be
powered via an additional 2 cores from the HFP control panel auxiliary 24 VDC supply) or a 230V
power option with local battery back up.
Peripherals
HFP AP-CRLS Local LCD Control Repeater
f
fSemi-Flush Mounting
f
fPower Supply 750mA
f
fAccess Enable Key-switch
For our full list of Panels download your HFP Price list from www.hochikieurope.com
23
W: 385mm x H:310mm x D:90mm
HFP AP-MATRIX
AP-MATRIX
Intelligent Fire Alarm Mimic Display System
HFP Matrix
The HFP Multi Loop Analogue Addressable fire Control Panel range offers a powerful and scalable The Guide graphics system or a modem for remote system interrogation by telephone lines may
solutions for fire detection and alarm systems. also be connected to HFP panels via the RS232 serial connection. All of the above produce an
outstanding and competitive, world class fire alarm control panels range.
With proven and mature software at its heart, the HFP range benefits from many years of
development and refinement to provide a fire alarm control panel range of outstanding
Installation
robustness, versatility and flexibility.
The elegant and simple construction of the HFP panel range with full mechanical protection
HFP multi-loop fire panels have a large clear display, context sensitive help screens, easy of all internal electronics, ensures ease of installation and protection of the vital parts during
navigation menus, versatile configuration options and simple control all enhanced by the power installation.
and flexibility that comes from compatibility with other components of the multi-loop HFP
system and peripherals. Features
HFP fire panels fully support Hochiki ESP loop drivers, which are capable of providing up to 400 f to 504 LEDs can be controlled from any HFP AP-S or HFP AP-AS panel (except HFP AP-ASL)
fUp
milliamps of loop current for the most demanding applications. f
fFull colour printing
An integral 5.25 Amp power supply and temperature compensated battery charger provides f
fAvailable in a range of standard enclosures to suit any applications
ample power for the 4 standard sounder outputs, loop powered sounders and fully loaded loops f
fBespoke sized units can be made upon request
of devices.
f
fChoice of Red, Green or Yellow LEDs
Connectivity f
fAvailable with or without controls
HFP fire panels connect seamlessly to HFP AS fire panels or other HFP multi-loop panels and f
fSame look and feel as HFP range
repeaters via the fully fault tolerant and robust HFP network. The network topology can be f
fHFP Matrix can easily be upgraded on site with minimal cost and effort
configured for either a fully secure “loop” or as an “open ended” network for replacing older f
fEN54-4 approved PSU (optional)
systems and using existing cabling.
f
fConfigured via standard HFP Loop Explorer Software
The HFP range supports a selection of serial bus peripherals such as HFP AP-CRL repeaters, 16
channel I/O boards, Relay boards, sounder boards and Conventional Zone boards to provide an
additional 512, fully programmable points. 0, 16, 48 or 96 zonal LED indicators can be provided
as standard and the panel will support up to 500 network wide software zones.
Software
The long established HFP Loop Explorer configuration utility can be used to configure the HFP
range. With the all new HFP Loop Explorer 2 offering a simpler and more intuitive programming
configuration tool capable of realising the largest and most complex fire alarm systems
with ease.
25
Detectors & Devices
Marine Repeater
MARINE ASM
MARINE ASM
Marine & Offshore Analogue Addressable 1-2 Loop Control Panel
Based upon the popular HFP single and two loop analogue addressable fire control panel, the Features
MARINE-ASM is certified with a host of classification societies and is Marine Equipment Directive
f zonal LED indicators
f16
approved.
f programmable sounder circuits
f2
MARINE-ASM provides a cost effective and scalable solution for all marine fire alarm systems.
f programmable inputs
f5
Up to 64 MARINE-ASM control panels may be networked to provide integrated control and f programmable relays
f3
indication of over 16000 fire alarm points.
f power supply
f3A
The optional Voyage Data Recorder interface outputs standard NMEA 0183 protocol and can be f
fLarge graphic display
fitted inside any control panel on the network.
f
fReal time clock
Suitable for all small to medium sized vessels, MARINE-ASM control panels can be expanded and f
fPowerful, network wide cause and effects
networked to become part of much larger networks
f
fSensitivity adjustment and Drift Compensation
With its large graphical display and ergonomic buttons and indicator layout, the MARINE- f
fHochiki protocol
ASM control panel is simple and straight forward to understand for installers, commissioning
f
fSame look and feel as HFP range
engineers and end users alike
f
fStores 1000 last events in event log
f
fCompact, stylish enclosure
f
fInstaller friendly, removable equipment chassis
f
fDifferent language and character set variants available
f
fFully EN54-2 and EN54-4 compliant
27
Network Diagram
High Integrity Configurable Network
Supports all
RS485 HFP I/O modules
<
An R5232 to R5685 The GUIDE dongle is
data converter is fitted to the R5232 Serial
supplied with the interface inside the HFP
Guide System Panel. It converts data to
R5485 and must be fitted
for the system to work
HFP Guide
Graphical User Interface
for Fire detection Equipment
HFP AP-AS
Analogue Addressable
Control Panel
28
16 Channel 8 Way 6 Way 4 Way Conventional
I/O Board Relay Board Relay Board Zone Board
24 VDC or
230V AC
HFP AP-CRLS
Network Card Required Local LCD Repeater
Loop 1
(If Fitted)
Loop 2
Each loop is capable
of hosting up to 127
24 VDC or
Hochiki Devices
HFP AP-AS 230V AC
Analogue Addressable
Control Panel
HFP Matrix
Up to 64 Panels/ Repeaters can The HFP network can be Fire Alarm Mimic
be added to the network interrogated remotely by Display System
using the modem module
Modem Card (normally fitted inside
the panel) connected via
the telephone. A mixture of up to 32 devices
The HFP system is compatible
with Hochiki protocols. can be fitted to each panel on
Panels can be used on the RS485 serial interface. The
the same network maximum number of HFP AP-
CRLS panels on a single RS485
serial interface is 15
29
HFP CP-R Repeater Panel
HFP CP Ancillary
HFP CP
CP
Conventional Fire Alarm Control Panel
The HFP CP range of conventional fire control panels are high Connectivity Features
specification, fully featured control units designed for the most
HFP CP control panels have a dedicated; serial bus for connection f
fFully certified to BS EN54-2 and BS EN54-4
demanding of conventional fire detection and alarm system
of repeater panels, Ancillary relay boards or zonal sounder f
f2-wire and standard versions in 2, 4 or 8 zones
applications.
extension boards. Up to seven units may be connected to the
f
fCompatible for use on BS5839: Part 1: 2013 installations
HFP CP is available with two, four or eight detection zones serial bus which can be up to 1200 metres in length. All units
in standard or installation saving, “two wire” versions. The connected to the serial bus are fully monitored and the control f
f2-wire repeaters and ancillary boards
extensive range of configuration features available ensure panel will announce a fault condition showing the address and f
fSimple, single board construction
suitability for new installations or panel replacements on older type of any units that fail or are disconnected after the panel has f
fInstaller friendly
systems. been configured to recognize them.
f
fCompatible with wide range of detection devices
“Two wire” versions of HFP CP can have detectors, call points
Configuration options are stored in non volatile memory and are f
fTwo monitored sounder outputs
and standard, polarized sounders connected to the same two
easily accessed via an intuitive user interface which allows the
core cable, greatly reducing installation time and cost on some f Amp power supply
f3
configuration data to be viewed and changed simply and easily.
installations. f
fAuxiliary power output
HFP CP control panels are compatible with most standard,
These “two wire” versions also provide the capability of zonal f
fFully programmable using simple menu options
conventional detectors, call points and sounders and are also
sounders which may be configured as zonal alarm (sounders ffAdjustable sounder delay time ffShort circuit fire by zone
compatible with “two wire” detector bases from Hochiki.
operate only in the zone of activation), common alarm (all
ffSounder configuration options ffNon latching zones
An integral three Amp power supply and temperature sounders in all zones operate) or two-stage alarm (sounders
compensated battery charger provides ample power for the two, are continuous in the zone of activation and pulsing in all other ffSilent zones ffGeneral panel configuration
0.5Amp rated standard sounder outputs, zonal sounder outputs zones). ffZone input delay ffZonal sounder delay call
on “two wire” versions and an auxiliary 24V supply output. ffCoincidence input selection detectors only
Installation ffZonal sounder delay call
ffI.S. Barrier selection by zone
Powerful Features The elegant and simple construction of the panel enables the points only
The simple and intuitive programming interface on HFP CP panels chassis to be completely dismantled by removing just two
allows simple configuration of many parameters by entering screws. The outer cover can also be detached by removing two
simple codes which are listed on the inner door look up table and hinge pins making first fix installation very simple and enabling
in the operation and maintenance manual. Configurable options the sensitive electronic parts to be stored safely for re-fitting at
include sounder delays, short circuit triggering of zones, non the commissioning stage.
latching zones, silent zones, I.S. barrier compatible zones and
Housed in the same installer-friendly and attractively styled
system disablements.
enclosure as the popular HFP CP (Conventional) and HFP CP-XT
(Extinguishant) range of fire control panels, HFP AP-AS combines
compact and practical styling with the programming power and
connectivity normally associated with much larger systems.
*These items not available on HFP ASL panel. ** Can be fitted to M3 size enclosure only 31
CP Network Diagram
High Integrity Configurable Network
Sounder 1
Zone 2
Zone 1
HFP CP - EN54-2/4
Conventional Control Panel
230V AC
32
Ancillary Board Ancillary Board
HFP CP -R (24)
Repeater Panel
HFP CP - R (24)
Repeater Panel
Factory Controls
33
HFP CP-XT Status Units
HFP CP-XT
CP-XT
Extinguishant Control Panel
Designed and manufactured to the highest standards in a quality controlled environment, the Features
HFP CP-XT extinguishant releasing panel offers outstanding value and performance for all small
f
fApproved to EN12094-1, EN54-2 and EN54-4
to medium fixed fire fighting installations.
f
fThree detection zones as standard
With three detection zones as standard, extinguishant release can be configured to activate from
f
fAny single zone or any combinations of zones can be configured to release
any combination of detection zone inputs to allow (among other combinations) any two from
three type activations such as would be required for detection in ceiling void, room and floor f
fConfigurable first stage sounder delays
void applications. f
fConfigurable detection delays
The extensive configuration options of the HFP CP-XT allow the functionality of the system to be f
fZero time delay upon manual release option
extensively modified while still complying with the requirements of the controlling standards for f
fCompatible with I.S. barriers
the equipment. f
fConfigurable extinguishant delays up to 60 seconds in 5 second steps
The panel contains a large LED display to enable easy configuration and control which also f
fConfigurable extinguishant duration up to 5 minutes in 5 seconds steps
displays the time remaining until extinguishant release for added user safety. f
fCountdown timer shows time remaining until release
The countdown timer is duplicated on up to seven remote status units to provide local indication f
fSupports up to seven, four wire status indicators
of the extinguishant system status. With all of the electronics mounted on a single, easily f
fBuilt in Extract Fan control
removable, steel plate HFP XT panels are both robust and easy to install.
f
fNon-latching zone input option to receive signals from other systems such as
aspirating equipment
Connectivity
To compliment the HFP CP-XT control panel there is a range of system status units.
Up to seven status units can be connected on a serial bus and require just two cores for data
and two cores for power. Once connected, status units are supervised and the HFP CP-XT control
panel will indicate a fault condition should any unit become disconnected.
Installation
The elegant and simple construction of the panel enables the chassis to be completely dismantled
by removing just two screws. The outer cover can also be detached by removing two hinge pins
making first fix installation very simple and enabling the sensitive electronic parts to be stored
safely for re-fitting at the commissioning stage.
35
HFP CP-XT+
CP-XT+
Extinguishant Control Panel Multi-Area
The HFP CP-XT+ range combines feature rich, HFP CP conventional Powerful Features Features
fire detection from two to eight zones with highly configurable
In addition to HFP CP-XT+ extinguishing modules, up to seven f
fFully certified to BS EN54-2 and BS EN54-4
extinguishing control modules to provide an integrated control
HFP CP ancillary boards providing zonal and common relay f 4 or 8 detection zones
f2,
solution for extinguishing systems with up to four protected
outputs and seven HFP CP sounder boards, each providing an
areas. f to 4 extinguishant areas
f1
additional eight, monitored sounder circuits can be connected
The fire detection section connects to the extinguishant control to the HFP CP RS485 serial bus at up to 1200 metres from the f
fFire and second stage sounder outputs for each area
modules via a serial link which allows secure, bi-directional control equipment. f
fFirst and second stage volt free changeover contacts for each area
transfer of data between the two. HFP CP-XT+ modules may be f
fReleased volt free contact per area
Also, up to seven HFP CP-XT ancillary boards and seven HFP Si
mounted remotely in separate enclosures and connected to HFP
status units can be connected to each HFP CP-XT+ module to f
fFault volt free contact per area
CP panels via this serial interface to provide central fire detection
provide remote status indication, control and additional outputs f
fProgrammable extinguishant delays
and control with distributed extinguishing systems.
as required at up to 1200 metres. This flexibility ensures that any
f
fProgrammable output duration
HFP CP-XT+ modules may also be mounted separately from fire system configuration can be realised with a minimum of cabling.
detection and control equipment and activated by addressable f
fExtract fan control
output modules or volt free contacts from other systems via two Installation f
fCountdown indicator shows time until release in seconds
monitored activation inputs. The simple construction of HFP CP-XT+ control panels utilises f
fMode select and manual release controls per area
The fire detection part of the system has all of the benefits removable bridge plates for mounting all electronic assemblies. f
fMonitored remote manual release input
of the popular HFP CP range with its many, easily accessed These bridge plates bring the terminals to the front of the
f
fMonitored remote Hold input
configuration options and compatibility with a wide range of enclosure providing easy access to all wiring terminals.
f
fMonitored remote Mode select (door interlock) input
detection devices. The outer door may be removed to further improve access by
f
fMonitored remote Released pressure switch input
The HFP CP-XT+ extinguishing modules set a new benchmark for withdrawing the easily accessible hinge pins. This ensure clear
access for wiring and protection of the electronic assemblies f
fMonitored remote Low Pressure switch input
extinguishing control panels. Each module is controlled by its
during installation. f
fMonitored Abort input
own powerful micro controller bringing unparalleled intelligence
and versatility to multi area extinguishing systems for the Multiple knock-outs in the top, bottom, back and sides of the f
fDual extinguishant outputs for each area
first time. enclosures provide ample options for cable entries. (configurable as Main/Reserve)
HFP CP-XT+ modules have inputs and outputs to cover all system
requirements including individual, monitored first and second
stage alarms and dual extinguishing outputs. The extinguishing
outputs can be configured to operate together or as main and
reserve for essential back up following a discharge. The can also
be individually calibrated to provide true open and short circuit
monitoring through pyrotechnic actuators or a wide range of
solenoids.
37
HFP CP-XTSI
CP-XTSI
Extinguishant Status & Ancillary Units
39
CP-XT Network Diagram
High Integrity Configurable Network
Manual Release
Door Interlock
Hold Off Unit
Detection Zone 1
Detection Zone 2
Detection Zone 3
HFP CP-XT-EN12094-1
Approved Control Unit
40
Addressable House
Fire Alarm
Ancillary Board
Status Unit Status Unit Status Unit
Released Pressure Swtich
Activate Extinguisher
Low Pressure Switch
4 core
Hold Off Unit
2 core
2 core BMS
Door Interlock Interface
41
SO2014 - 2.5A PSU
HFP PSU
PSU
Power Supplies
The HFP PSU range of 24 VDC power supplies are designed to meet the exacting requirements of
fire detection and alarm systems and fire protection systems.
All models charge sealed lead acid batteries using sophisticated, temperature compensated
charging and monitoring techniques to keep the batteries in the best possible condition.
Over depletion of batteries is prevented by a low battery voltage disconnection function which
removes the load from the batteries when their terminal voltage reduces to a level which would
damage them.
A low battery voltage fault warning is given when the batteries reach the minimum terminal
voltage recommended by the battery manufacturers.
A high series resistance in the battery supply circuit which would allow the power supply output
voltage to fall outside of the specified range is indicated as a fault condition.
All models are fitted with a dual output board to provide redundant power paths for fire alarm
applications and are available in a range of enclosures to accommodate different battery sizes.
On-board LED indicators are provided to indicate the status of the unit and an on-board header
is available to extend status signals to other systems volt free relay contact that operates upon
any fault condition or total power failure.
Enclosures are designed to match both HFP AP and HFP CP fire panel ranges and are constructed
from 1.2mm mild steel and are finished with epoxy powder coating.
The HFP PSU boxed range is available in the following power outputs:
f
fHFP PSU-2.5/12SS - 2.5A output and up to 12Ah batteries
f
fHFP PSU-5.25/26SS - 5.25A output and up to 26Ah batteries
f
fHFP PSU-10.25/45SS - 10.25A output and up to 45Ah batteries
43
ESP
intelligent
Analogue Addressable Fire Detection
Hochiki’s comprehensive ESP intelligent (Analogue Addressable
range) is suitable for even the most demanding environments and
incorporates high performance sensors, a wide selection of input
and output modules and ancillaries. All products use Hochiki’s
high integrity digital communications link ‘ESP’ (Enhanced Systems
Protocol) that’s at the heart of the ESP range.
www.hochikieurope.com/esp
ALN-E(HFP) ATJ-E(HFP) ACC-E(HFP) ACD-E ACB-EW
A Optical Smoke Sensor incorporating A Multi-Heat Sensor incorporating A Multi Sensor incorporating a thermal Addressable Multi Sensor with CO An Intelligent IP67 Rated Waterproof
Hochiki’s unique High Performance a variable Fixed Temperature heat element and a High Performance detection An addressable loop- Multi-Heat Sensor which can be
Chamber which allows the sensor element and Rate Of Rise heat element, photoelectric smoke chamber. Has three powered multi-sensor, with smoke, used externally and is supplied with
threshold level to be increased, thereby both controlled from the Control Panel modes controlled from the Control Panel, heat and CO sensing elements. The unit its own fixing base which is used to
improving the signal to noise ratio and allowing either thermal element or both allowing either the optical or thermal offers 24 different modes of operation* fix the sensor. Flying leads from the
reducing susceptibility to false alarms. elements simultaneously to be active in element or both to be active in making and seamlessly matches the other sensor connect directly to the loop via
ffRemovable, High Performance Chamber making the fire decision. the fire decision. sensors in the ESP Range. The CO waterproof connectors.
ffTwin fire LEDs allow 360° viewing sensing element can be used to detect
ffUser selectable modes ffUser selectable modes ffUser selectable modes
ffLocking mechanism (sensor to base) smoke as well as life-threatening CO
ffIncorporates Fixed Temperature and ffIncorporates Optical & Heat elements ffIncorporates Fixed Temperature and
ffVariable sensitivity levels (acting as a CO alarm).
Rate Of Rise Heat elements ffRemovable, High Performance Chamber Rate Of Rise Heat elements
ffElectronically addressed ffTwin fire LEDs allow 360° viewing ffUser selectable modes
ffTwin fire LEDs allow 360° viewing ffTwin fire LEDs allow 360° viewing
ffApproved by LPCB & VdS
ffElectronically addressed ffLow profile ffElectronically addressed
ffPulsing/non-pulsing controlled ffVariable sensitivity
ffLPCB & VdS approved to Classes A, B & C ffMultiple modes
from panel* ffElectronically addressed ffIP67 rated
ffAddressed via TCH-B200 Hand Held ffAddressed via TCH-B200 Hand Held ffHeat, Optical and CO sensing elements
ffAddressed via TCH-B200 Hand Held ffSupplied with fixing base
Programmer Programmer ffCO Alarm (COHb) facility
Programmer ffLPCB & VdS approved to Classes A, B & C
ffPulsing/non-pulsing controlled ff10 year CO sensor life
ALN-ENM from panel* ffPulsing/non-pulsing controlled
ffProgrammable fire threshold level
ffAddressed via TCH-B200 Hand Held
from panel* Programmer & PL-2
ALN-EN/SIL ATJ-ENM ff2 colour LED (Polling: Green, Fire: RED)
ffApproved by LPCB & VdS ffPulsing/non-pulsing controlled from
ffRI & LED controllable separately if
ATJ-EN/SIL panel*
ACC-ENM required*1
ACC-EN/SIL ffPulsing/non-pulsing controlled
from panel*
ffAddressed via TCH-B200 Hand Held
Programmer
*1Please ensure control panel compatibility. *2For product variants, see pages 77 to 80. 47
CHQ-WPK YBO-BS(HFP) YBO-BSB2(HFP)*2 CHQ-CB(HFP)*2 CHQ-WB(HFP)*2
A Weatherproof Back Box and gasket An Intelligent Loop-Powered Base An Intelligent Loop-Powered Base An Intelligent Loop-Powered Ceiling An Intelligent Loop-Powered Wall
set for the CHQ-WS2 Wall Sounder, Sounder providing 13 volume levels Sounder Beacon providing 13 volume Beacon with a high-intensity LED and Beacon with a high intensity LED and a
CHQ-CB Ceiling Beacon, CHQ-WB Wall and 51 tones with a maximum output levels and 51 tones with a maximum a custom designed free-form optic custom designed free-form optic which
Beacon and CHQ-WSB2 Wall Sounder of up to 98 dB(A) (±2 dB(A)) with low output of up to 98 dB(A) (±2 dB(A)) with which produce a highly visible flash. produces a highly visible flash. Variants
Beacon, increases the IP Rating of the current consumption. low current consumption. Variants available in 5m, 7.5m, 10m available in 5m, 7.5m and 10m area
Sounder to IP65 for external use. and 15m area coverage. coverage.
Compatible bases: Compatible bases:
ffEasy to install YBN-R/3 or YBN-R/3(SCI) Bases. YBN-R/3 or YBN-R/3(SCI) Bases. ffHigh Intensity LED technology Compatible bases:
ffIncreases sounder IP Rating from IP21 ff0.5/1 Hz flash frequency YBN-R/3, YBN-R/3(SCI), YBO-BS or the
ffLoop Powered ffLoop Powered
to IP65 (external use) ffAddressable via TCH-B200 YBO-R/(SCI)
ffSingle Loop Address - addressed ffSingle Loop Address, addressed
ffIncreases beacon IP rating from IP21 to ffChoice of 2 LED colours (red and white)
automatically by Control Panel or via by either Control Panel or TCH-B200 ffHigh Intensity LED technology
IP33 (external use) the TCH-B200 Hand Held Programmer ffApproved to EN54-23: 2010 - Category ‘C’
ff50 ~ 98 dB(A) (±2 dB(A)) output at 1m ff0.5/1 Hz flash frequency
ff50 ~ 98 dB(A) (±2 dB(A)) output at 1m ffHigh efficiency
ffFits Hochiki Standard or Isolator Base ffAddressable via TCH-B200
ffFits Hochiki Standard or Isolator Base and supports ESP Sensors, Beacons ffSelectable light output*1
ffChoice of 2 LED colours (red and white)
and supports ESP Sensors, Beacons and Remote Indicator ffOperating Voltage 17-41 VDC
ffApproved to EN54-23: 2010 - Category ‘W’
and Remote Indicator ffBeacon and Sounder can be controlled ffHigh efficiency
ffApproved by LPCB, VdS & to SIL2 independently*1
ffSelectable light output*1
ff51 User-Selectable Tones (all tones ffApproved to EN54-23: 2010 - Category O’
ffOperating Voltage 17-41 VDC
EN54-3 compatible) ff51 User-Selectable Tones (all tones
EN54-3 compatible)
YBO-BS/SIL
YBO-BSB2/SIL
48 *1Please ensure control panel compatibility. *2For product variants, see pages 77 to 80.
2x 1x 1x 1x
Monitored Monitored
Input Output Input Output
50
Lid Colours Lid Colours
1x 2x
1x
Monitored Sounder
Transparent Zone Transparent Input Output
Black Black
Opaque Opaque
White White
51
PS200 TCH-B200
Hinged cover for Call Point. An acrylic A Hand Held Address Programmer
hinged cover for the HCP-E(SCI) manual designed to address the ESP range of
call point range which protects against Sensors and other intelligent devices
accidental operation/vandalism. such as the YBO-BS Base Sounder.
ffEasy to install Designed to be light, robust and easy
ffProtects against accidental activation to use it operates from a single PP3
ffRequirement under BS5839 size battery which can provide up to
8000 operations.
ffLightweight design
ffQuick and reliable addressing
ffUp to 8000 address settings from
one battery
ffDisplays sensor analogue value
52
CDX
conventional
Conventional Fire Detection
Hochiki’s CDX range offers one of the most extensive product
portfolios available, providing solutions for most conventional fire
detection applications as well as security systems, due to its wide
operating voltage range (9.5~30 VDC).
www.hochikieurope.com/cdx
SOC-E3(HFP) DCD-AE3(HFP) DCD-CE3(HFP) DFJ-AE3(HFP) DFJ-CE3(HFP)
A Conventional Photoelectric Smoke A Conventional Rate of Rise Heat A Conventional Rate of Rise Heat A Conventional 60°C Fixed Temperature A Conventional 90°C Fixed Temperature
Detector which is fully compatible with Detector incorporating a 60°C fixed Detector incorporating a 90°C fixed Heat Detector using a thermistor and Heat Detector using a thermistor
the majority of existing Conventional temperature element. The thermistor temperature element. The thermistor linearising circuit to provide an accurate and linearising circuit to provide an
systems. and linearising circuit provide an and linearising circuit provide an linear response Heat Detector. A third accurate linear response. A third
ffRemovable, High Performance chamber accurate linear response Heat Detector. accurate linear response Heat Detector. terminal provides integral remote terminal provides integral remote
ffRemote Indicator output A third terminal provides integral A third terminal provides integral indicator output. indicator output.
ffWide voltage range (12 ~ 30 VDC) remote indicator output. remote indicator output. ffElectronic linear heat detection ffElectronic linear heat detection
ffLow profile design with one piece ffElectronic linear heat detection ffElectronic linear heat detection ffRemote Indicator output ffWide voltage range - can be installed
outer cover ffRemote Indicator output ffRemote Indicator output ffWide voltage range (9.5 ~ 30 VDC) on security systems
ffSingle fire LED - 360° viewing ffWide voltage range (9.5 ~ 30 VDC) ffWide voltage range (9.5 ~ 30 VDC) ffTwin fire LEDs allow 360° viewing ffTwin fire LEDs allow 360° viewing
ffRange of mounting bases ffTwin fire LEDs allow 360° viewing ffTwin fire LEDs allow 360° viewing ffFixed Temperature Detector ffFixed Temperature Detector
ffApproved by LPCB ffRange of mounting bases ffFull range of mounting bases ffFull range of mounting bases ffFull range of mounting bases
ffAutomatic Sensitivity Window ffApproved by LPCB & VdS ffApproved by LPCB & VdS ffApproved by LPCB & VdS ffApproved by LPCB & VdS
Verification (ASWV) – Drift
DCD-A3M DCD-CE3M
Compensation Technology
SOC-E3NM
54
DFG-60BLKJ DRD-E IFD-E 16591 16091
An IP67 Waterproof Conventional A Conventional Flame Detector A Conventional IR Infrared Flame
3
A UV/Dual IR Flame Detector, Alloy A Hand Held Flame Detector Tester
60°C Fixed Temperature Heat Detector designed for internal use to detect Detector designed to respond to low- Housing Model 16591 is an IR2 flame providing a flame-free method of UV
with minimal standby current and large flames. The detector fits any of frequency (1 to 15Hz) flickering IR detector with an additional UVdetection testing the industrial IR3 series of flame
high reliability. Particularly suited the CDX range of mounting bases. The radiation emitted from flames during element, designed for use where open detectors: IFD-E, IFD-E(IS) and the IFD-
to environments, which are exposed detection zone is a 90° cone and the combustion, the unit can discriminate flaming fires may be expected and E(Exd).
to high levels of condensation or are detection range is up to and including between flames and spurious sources responds to the light emitted from
THIS EQUIPMENT IS ALSO AVAILABLE
hosed down. 25m. of radiation such as sunlight. An I.S. flames during combustion.
FOR HIRE. Please contact your Sales
ffWaterproof design – rated to IP67 ffClass 1 performance as defined in version and an explosion-proof version
The detector discriminates between Representative for further information.
ffLow profile shape ffBS EN54-10:2002 (range up to 25m) are also available.
flames and other light sources by ffTests many Flame Sensors Types UV,
ffUtilises a bi-metallic strip to sense ffSingle IR technology ffTriple IR sensor responding only to particular optical UV/IR, UV/IR2, IR3, IR2, IR
temperature change ffRobust and slim design ffClass 1 sensitivity to EN54-10 detects wavelengths and flame flicker ffRange typically 3m and beyond
ffNo Mounting base required ffLow current consumption 0.1m2 fire @ 25m
frequencies. This enables the detector ffSelectable optical output intensity with
ffMinimal standby current ffEasy to install ffExcellent optical interference immunity
to avoid false alarms due to such factors LED bar graph indication
ffApproved by LPCB & VdS ffTwin LEDs for 360° view (solar blind)
as flickering sunlight. ffFlame-free UV testing, ideal for
ffApproved by LPCB & VdS ffSelectable output options - hazardous areas
ffFits any of the CDX Range of mounting conventional ffHighest immunity to false sources ffSimple to use hand held unit with
bases 2-wire, 4-20 mA, latching or non-latching ffSuitable for indoor and outdoor areas
relay contacts, fire/fault, pre-alarm rechargeable NiCd battery pack and charger
ffSelectable response speed
ffSelectable response speed
ffOptical self-test
ffOptical self-test
ffLow power consumption
ffLow power consumption
ffApproved to EN54
ffApproved by LPCB
ffDetects invisible flames from fuels such
ffSIL Capable as Hydrogen and other inorganic fuels
57
BANSHEE EXCEL BANSHEE EXCEL BANSHEE EXCEL BANSHEE EXCEL CLB-E(HFP)
An Electronic Conventional Sounder IP66 LITE LITE IP66 A Conventional Visual Indicator for use
which can be installed internally. An Electronic Conventional Sounder An Electronic Conventional Sounder An Electronic Conventional Sounder on 24 V Sounder Circuits. The unit is
ffRobust design comes with a deeper IP66 back box, Beacon which can be installed Beacon comes with a deeper IP66 fitted with a Fresnel lens and high-
ffLow current consumption which enables the unit to be installed internally. back box, which enables the unit to be intensity LEDs, a design which produces
ffEasy to install externally. installed externally. a highly visible flash. The casing exactly
ffRobust design
ffMaximum 110 dB(A) at 1m (dependent ffLow current consumption
matches the CDX Detector range in
ffRobust design ffRobust design
on tone selected)
ffLow current consumption ffEasy to install ffLow current consumption
shape and colour providing seamless
ff32 user-selectable tones
ffEasy to install ffXenon beacon technology ffEasy to install integration.
ffApproved by VdS ffMaximum 110 dB(A) at 1m (dependent
ffDeep base provides IP66 protection ffXenon beacon technology ffHigh Intensity LED technology
ffMaximum 110 dB(A) at 1m (dependent on tone selected) ffDeep base provides IP66 protection ffFits standard CDX base (YBN-R/6)
on tone selected) ff32 user-selectable tones ff32 user-selectable tones ffSupplementary indicator
ff32 user-selectable tones ffApproved by VdS ffApproved by VdS ffNot EN54-23 compliant
ffApproved by VdS ffSupplementary indicator ffSupplementary indicator ffColour-matched to existing detector
ffNon EN54-23 compliant ffNon EN54-23 compliant and base ranges
ffMaximum 110 dB(A) at 1m (dependent
on tone selected)
58
CWST-S5 CWST-W5 MBF-6EV FB/024/R/W CCP-E
A Conventional Beacon which features A Conventional Weatherproof Beacon, A Conventional Alarm Bell six inches A Conventional Alarm Bell six inches A Conventional Manual Call Point based
high output LEDs, advanced optics and which features high output LEDs, diameter and for internal use, based diameter, which has the same operation upon the industry standard KAC world
an innovative lens design, providing advanced optics and an innovative upon the industry standard KOBELL as the MBF-6EV except it comes series housing. The unit can support
outstanding Omni-directional light lens design, providing outstanding range. equipped with a weatherproof back box either a ‘Frangible Glass’ element
coverage at low current draw. Omni-directional light coverage at low ffLow profile enabling it to be used externally. or a ‘Non Frangible Plastic’ element.
Specifically designed for, and current draw. Specifically designed ffLow current consumption ffLow profile It is also supplied complete with
approved to meet EN54-23. CWST-S5 for, and approved to meet EN54-23. ffFully suppressed and polarised ffLow current consumption SR-BACKBOX for surface mounting.
delivers quality, reliability and long Weatherproof base provides IP65 for ff95 dB(A) at 1m (typ) ffFully suppressed and polarised Note - Yellow version not EN54 compliant
operational life. external use applications. ffApproved by LPCB ff100 dB(A) at 1m (typ) ffApproved to EN54-11:2001
ffApproved to EN54-23, C & W categories* ffApproved to EN54-23, C & W categories* ffSimple installation with multi-fixing ffWeatherproof for external installation ffOther colours available on request
base plate ffApproved by LPCB ffApproved by LPCB
ffAdvanced optics ensures superior light ffAvailable in either red or white casings
coverage at low current draw ffAvailable with either a red or white LED ffSimple installation with multi-fixing ffTerminals can accommodate up to a
ffAvailable in either red or white casings ffSynchronised flash exceeds EN54-23 base plate 2.5mm2 solid conductor
ffAvailable with either a red or white LED standard
ffSynchronised flash exceeds EN54-23 ffSoft start feature reduces power surges MCP1A
standard during system start-up
ffSoft start feature reduces power surges ffAdvanced optics ensures superior light
during system start-up coverage at low current draw
60
CDX
Intrinsically Safe & Explosion Proof
Conventional Products
www.hochikieurope.com/is
SLR-E-IS DCD-1E-IS YBN-R/4(IS) CCP-E-IS CCP-W-IS
A Conventional I.S. Photoelectric A Conventional I.S. Rate of Rise Heat A Conventional Detector Mounting A Conventional Manual Call Point An IP67 Conventional weatherproof call
Smoke Detector designed for use in Detector designed for use in hazardous Base associated with the CDX Range of designed for use in hazardous areas point designed for use in hazardous
hazardous areas. Incorporates a remote areas. Incorporates a remote indicator Intrinsically Safe Detectors and is fully and based upon the industry standard areas and based upon the industry
indicator output and a removable output and a 60°C fixed temperature compatible with the majority of existing KAC world series housing. standard KAC world series housing.
chamber for easy maintenance. element. conventional fire alarm control panels. ffTerminals can accommodate up to ffSealed to IP67
ffRemovable, High Performance chamber ffTwin fire LEDs allow 360° viewing ffLow Profile, only 8mm a 2.5mm2 solid conductor ffTerminals can accommodate up to
ffTwin fire LEDs allow 360° viewing ffElectronics free mounting base ffRugged design ffApproved to EN54 Part 12 a 2.5mm2 solid conductor
ffSupported by a range of barriers ffRemote indicator output ffDedicated cable screen terminal ffRugged design ffApproved to EN54 Part 12
ffRemote indicator output ffATEX certification to: II 1G EEx ia IIC T5 ffAccepts from 1 to 2.5mm2 cables ffGL Type approval ffRugged design, with anti-tamper facility
ffATEX certification to: II 1G EEx ia IIC T5 (Tamb=55°C) ffQuick connection via square cable ffATEX Classification to: II 1G EEx ia IIC T4 ffATEX Classification to: II 1GD Ex ia IIC T4 Ga
(Tamb=55°C) ffSuitable for installation in areas at clamps ffSupports either a ‘Frangible Glass’ ffSupports either a ‘Frangible Glass’
ffSuitable for installation in areas at Category 1 (inc all lower categories) ffElectronics free element or a ‘Non Frangible element or a ‘Non Frangible
Category 1 (inc all lower categories) ffApproved by LPCB, GL and to IECEx plastic’ element plastic’ element
ffGL Type approval
ffApproved by LPCB, GL and to IECEx CCP-E-IS/SIL CCP-W-IS/SIL
DCD-E-IS YBN-R/4(IS)
SLR-E-IS DCD-1E-IS/SIL YBN-R/4(IS)
SLR-E-IS/SIL
62
Lid Colours Lid Colours
2x
Transparent Zones Transparent
Black Black
Opaque Opaque
White White
63
IFD-E(IS) IFD-E(Exd) 16091
An Intrinsically Safe Conventional A Conventional Explosion-Proof A Hand Held Flame Detector Tester
Infrared Flame Detector designed to Infrared Flame Detector designed to providing a flame-free method of UV
respond to low-frequency (1 to 15Hz) respond to low-frequency (1 to 15Hz) testing the industrial IR3 series of flame
flickering IR radiation emitted from flickering IR radiation emitted from detectors: IFD-E, IFD-E(IS) and the
flames during combustion, the unit flames during combustion, the unit IFD-E(Exd).
can discriminate between flames and can discriminate between flames and
THIS EQUIPMENT IS ALSO AVAILABLE
spurious sources of radiation such as spurious sources of radiation such as
FOR HIRE. Please contact your Sales
sunlight. sunlight.
Representative for further information.
ffUnaffected by convection currents, ffUnaffected by convection currents,
ffTests many Flame Sensors Types UV,
draughts or wind and solar-blind draughts or wind and solar-blind
UV/IR, UV/IR2, IR3, IR2, IR
ffATEX certification to: EEx ia IIC T4 ffATEX certificated to: EEx d IIC T6 (85°C)
ffRange typically 3m and beyond
(135°C) (zones 0, 1 and 2) (zones 1, 21, 2 and 22)
ffSelectable optical output intensity with
ffSelectable response speed ffResponsive to a flame more than
LED bar graph indication
ffApproved by LPCB 25m away
ffFlame-free UV testing, ideal for
ffSIL capable ffSelectable response speed
hazardous areas
ffMounting bracket available IFD-MB ffApproved by LPCB
ffSimple to use hand held unit with
ffResponsive to a flame more than ffSIL capable rechargeable NiCd battery pack and
25m away charger
ffClass 1 performance as defined in
BS EN54-10:2002 (on the high sensitivity
setting)
ffTolerant of fumes, vapours, dust and mist
64
FIREwave
Hybrid Wireless Fire Detection
www.hochikieurope.com/firewave
SYSTEM ARCHITECTURE
RSM-WTM RSM-EXP
A Wire to Wireless Translator Module A Wireless Expander Module which
which allows a wireless fire detection allows extended signal coverage for
system to be interfaced directly onto the the wireless system by boosting signal
loop. Fully loop-powered, the unit can strengths from translators, to cover
support up to 32 wireless devices* and larger buildings for example. Up to
up to 7 RSM-EXP Expander Modules**. 7 RSM-EXP Expander Modules** can
ffLoop Powered be supported by a single RSM-WTM
ffBi-directional wireless communication Wireless Translator Module.
ffAutomatic wireless channel hopping ffBi-directional wireless communication
ffFully intelligent ffAutomatic wireless channel hopping
ffHigh reliability and sensitivity ffFully intelligent
ffFlexible on site device adjustment ffHigh reliability and sensitivity
ffIP65 protection for exterior mounting ffFlexible on site device adjustment
ffMakes additions to existing wired ffIP65 protection for exterior mounting
systems easy and cost effective ffMakes additions to existing wired
ffLPCB approved systems easy and cost effective
ffSelf optimising wireless amplitude and ffRequires external power supply (24 VDC)
frequency ffLPCB approved
ffSelf optimising wireless amplitude and
frequency
The RSM-WTM Translator Module (T) is fitted to the analogue *Maximum number of 16 output devices such as A/V or
addressable fire system loop. It then provides an interface output modules.
between the loop and the wireless devices. The module is
**Maximum of 5 child Expander Modules connected in
fully powered by the loop and full control and monitoring of
cascade or a maximum of 3 child Expander Modules connected
the wireless devices is possible through the control panel.
directly to the Translator Module or another Expander Module
The RSM-EXP Expander Module (E) allows the wireless system
to provide greater coverage by receiving and re-transmitting
the boosted wireless signal.
66
RSM-CIM RSM-IP RSM-POM RSM-CP ROP-E
A Wireless Conventional Interface A Wireless Single Channel Input A Wireless Powered Output Module A Wireless Resettable Manual Call A Wireless Dual Optical Smoke Sensor
Module which allows a zone of wireless Module which allows the on/off status which allows the control panel to Point which features a simulated glass which is fully intelligent device and
devices to be added to an existing (alarm/fault) of an external device activate/switch the circuits of an front. When activated, a plastic ‘flag’ compatible with FIREwave wireless
conventional zone (or as a stand- to be transmitted to a control panel external device or system wirelessly via is displayed in the window of the unit; Translator and Expander modules.
alone zone). The zone is wired directly wirelessly via an RSM-CIM, RSM-EXP an RSM-CIM, RSM-EXP or RSM-WTM. the supplied key will reset the flag The detector is designed for open
to the RSM-CIM which is then in turn or RSM-WTM. The unit’s contacts can be configured and unit. Supplied with back box. area protection and utilises dual-path
supported by an RSM-EXP Expander ffLatching Input circuits are monitored to be normally open or normally closed Weatherproof housing also available optical smoke detection technologies
Module. for fire and fault conditions and switch at 30 VDC/125 VAC at 2 A. ffBi Directional wireless communication and algorithms for improved
ffBi-directional wireless communication ffBi-directional wireless communication The unit can be configured to provide ffFully intelligent performance, whilst maintaining
ffAutomatic wireless channel hopping ffAutomatic wireless channel hopping either a 12 VDC or a 24 VDC output. ffUtilises standard low cost lithium the high levels of unwanted alarm
ffFully intelligent ffFully intelligent ffSelectable output - 12 VDC or 24 VDC battery technology rejection. Utilising wellproven
ffHigh reliability and sensitivity ffHigh reliability and sensitivity ffBi-directional wireless communication ffLong battery life adaptive radio signal processing
ffFlexible on site device adjustment ffFlexible on site device adjustment ffAutomatic wireless channel hopping ffResettable Element algorithms ensure the highest levels
ffIP65 protection for exterior mounting ffMakes additions to existing wired ffFully intelligent ffClear ‘device activated’ warning flag of life safety and system reliability are
systems easy and cost effective ffHigh reliability achieved.
ffMakes additions to existing wired ffHigh reliability and sensitivity
systems easy and cost effective ffSelf optimising wireless amplitude ffAutomatic channel hopping
ffFlexible on site device adjustment ffAdvanced dual path optical chamber
and frequency ffSelf optimising wireless amplitude and
ffRequires external power supply for use ffMakes additions to existing wired design
as stand-alone zone systems easy and cost effective frequency
ffInternal algorithm processing
ffSelf optimising wireless amplitude ffSelf optimising wireless amplitude optimises performance
and frequency and frequency ff3rd party approved
ffContacts can be configured as N/O ffUp to 10 year battery life
or N/C
ffUtilises standard low cost lithium
battery technology
ffBi-directional wireless communications
ffCompatible with all FIREwave
Translators and Expanders
ffDevice identification tab
ffDual angle scattering analysis
ffFast test feature for engineer testing.
67
RHT-E RMC-E HFC-SBR-23-03 HFC-WSR-03 RSM-BS
A Wireless Class P Heat Detector A Wireless Multi-Criteria Detector A Wireless Weatherproof Wall Sounder Wireless Weatherproof Wall Sounder A Wireless Intelligent Base Sounder
which is fully intelligent device and which is fully intelligent device and VAD The HFC-SBR-23-03 Wall Sounder The HFC-WSR-03 Wall Sounder forms providing 32 tones as standard with a
compatible with FIREwave wireless compatible with FIREwave wireless VAD forms the core of our wireless the core of our wireless EN54-3 volume range of between 90.1 to 92.4
Translator and Expander modules. Translator and Expander modules. EN54-23 modular visual alarm device modular alarm device range. The unit dB(A) at 1 metre. The pre-moulded
The detector is designed for open The detector is designed for open (VAD) range. The unit comes with a comes with a wireless module HFW- base will accommodate any type
area protection and utilises dual-path area protection and utilises dual-path wireless module HFW-SIM-01 which SIM-01 which requires fitting into of FIREwave wireless detector, or a
optical smoke detection technologies optical smoke detection technologies requires fitting into the Wall Sounder the Wall Sounder back box. The HFC- locking cover plate (RSM-C).
and algorithms for improved and algorithms for improved VAD back box. The HFC-SBR-23-03 WSR-03 is weather proof as standard ffBi-directional wireless communication
performance, whilst maintaining performance, whilst maintaining is weather proof as standard and is and is equipped with 3 levels of volume ffAutomatic wireless channel hopping
the high levels of unwanted alarm the high levels of unwanted alarm equipped with 3 levels of volume adjustment and 32 recognised tones ffLPCB approved
rejection. Utilising well proven rejection. Utilising well proven adjustment, high output LED beacon which can be set locally at the sounder. ff32 Tones, adjustable volume from 90.1
adaptive radio signal processing adaptive radio signal processing and 32 recognised tones which can be ffFlexible modular design to 92.4 dB(A)
algorithms ensure the highest levels algorithms ensure the highest levels set locally at the sounder. ffApproved to EN54-3 ffEasy and cost-effective additions to
of life safety and system reliability are of life safety and system reliability are existing wired systems
ffFlexible modular design ff32 Tone Settings
achieved. achieved. ffCompliant with current EN54 European
ff32 Tone Settings ffTwo stage alarm capability
standards
ffTwin alarm LEDs for 360 deg visibility ffInternal algorithm processing ffTwo stage alarm capability ffWeatherproof as standard
ffInternal algorithm processing optimises performance ffWeatherproof as standard ffEasy to install
optimises performance ff3rd party approved ffEasy to install ffMicrophone self test facility
ff3rd party approved ffUp to 10 year battery life ffCan be configured as Beacon only ffAlso available in white
ffUp to 10 year battery life ffUtilises standard low cost lithium ffMicrophone self test facility
ffUtilises standard low cost lithium battery technology ffAlso available in White
battery technology ffMultiple smoke and heat sensitivity ffApproved to EN54-3 and EN54-23
ffBi-directional wireless communications setting (W-2.5-7)
ffCompatible with all FIREwave ffBi-directional wireless communications
Translators and Expanders ffCompatible with all FIREwave
ffMultiple sensitivity settings Translators and Expanders
ffDevice indentification tab. ffComplies with the latest multi-sensor
standard EN 54-295 year product warranty
ffTwin alarm LEDs for 360° visibility.
ffAdvanced dual path optical chamber
design
68
RSM-BSB HFW-DHR-01 REPLACEMENT
A Wireless Intelligent Base Sounder A wireless magnetic door holder BATTERIES
Beacon providing 32 tones as standard is compatible with all of the FIREwave Primary Battery
with a volume range of between 90.1 Wireless Translator and Expander Spare Primary Battery (pack of 10)
to 92.4 dB(A) at 1 metre and a 1 Hz Modules enabling it to be easily
Secondary Battery
flash rate. The pre-moulded base will integrated into a new or existing
Spare Secondary Battery (pack of 10)
accommodate any type of FIREwave wireless system, linked to any wired
wireless detector, or a locking cover system or even used as a standalone
plate (RSM-C). system. Its fully wireless and battery
ffFlash rate of 1 Hz powered capability means it requires
ffBi-directional wireless communication no wiring or power supply, making
ffAutomatic wireless channel hopping installation quick, easy and cost
ffCompliant with current EN54 European effective.
standards and BS5839 ffApproved to BS EN 1155
ffLPCB approved ffEasy and Fast installation
ff32 Tones, adjustable volume from 90.1 ffLocal door release button
to 92.4 dB(A)
ff5 year battery life
ffEasy and cost-effective additions to
ffUtilises standard low cost lithium
existing wired systems
battery technology
*Note - Non EN54-23 Compliant (supplementary indicator)
ffBi-directional wireless communications
ffHigh holding force
ffA Door closed monitoring option
ffA Fail Safe monitoring to BS 7273 -
4:2015 cat. A, B & C
69
FIRElink
Air Sampling System
www.hochikieurope.com/firelink
FIRElink-25 FIRElink-100 FIRElink-400 FIRElink-400CM FL-RC
A Single Pipe Air Sampling Detector A Two Pipe Air Sampling Detector A Four Pipe Air Sampling Detector A Four Pipe Air Sampling Detector with An Input Relay Card designed to
designed to provide very high designed to provide very high designed to provide very high integral Command Module designed to provide detector inputs that may be
sensitivity smoke detection. The sensitivity smoke detection. The sensitivity smoke detection with provide very high sensitivity smoke programmed for Remote Day/Night
unit will automatically setup for easy unit will automatically setup for easy inherent immunity to dust/dirt build- detection with inherent immunity to Mode Changeover, Remote Reset or
installation and is also designed to fit installation and is also designed to fit up. Discriminates between ‘dirty’ and dust/dirt build-up. Added “Command ClassiFire Override as well as power
into a Docking Station which accepts into a Docking Station which accepts ‘clean’ operating periods such as day Module” allows the user to control, supply fault monitoring.
all sampling pipes and cables leaving all sampling pipes and cables leaving and night, automatically substituting program and test other FIRElink units ffRelay contacts rated at 0.4 A @24 VDC
the detector to be fitted during the the detector to be fitted during the appropriate system sensitivity on the same “network”. ffCommon Fault relay energised normally
final commissioning phase. final commissioning phase. without the need for external input or ffApproved LPCB closed for fail safe operation
ffApproved LPCB ffApproved LPCB adjustment. ffFour sampling pipes up to 200m ffOnly compatible with FIRElink-25 and
(aggregate) in length (still air) FIRElink-100
ffFalse alarms reduced by unique dust ffTwo sampling pipes up to 100m ffApproved LPCB
ffRS485 communications for networking ff4 staged normally open relay
discrimination (aggregate) in length (still air) ffFour sampling pipes up to 200m
and remote communications outputs for unmonitored connection
ffRS485 communications for networking ffRS485 communications for networking (aggregate) in length (still air) to other systems
and remote communications and remote communications ffRS485 communications for networking ffCommand Module allows control over
ffUltra small, low cost aspirating smoke ffUltra small, low cost aspirating smoke and remote communications other FIRElink units on network
detector detector ffFalse alarms reduced by unique dust ffFalse alarms reduced by unique dust
ffSingle sampling pipe up to 50m in ffFalse alarms reduced by unique dust discrimination discrimination
length (still air) discrimination ffHigh sensitivity provided by laser based ffHigh sensitivity provided by laser based
ffHigh sensitivity provided by laser ffHigh sensitivity provided by laser light scatter for reliable early warning light scatter for reliable early warning
based forward light scatter for reliable based forward light scatter for reliable
early warning early warning
71
FL-APIC FIRElink FIRElink
An Addressable Protocol Interface Card Sampling Pipes Dust Filters
used to decode and relay FIRElink The sampling pipe and connectors are FL-DF1 Hochiki Dust Filter For FIRElink
detector information directly to an used in conjunction with the FIRElink 400 Series
Hochiki ESP compliant Fire Control Range of Air Sampling Detectors.The
FL-DF2 Hochiki Dust Filter For FIRElink
Panel. Pipe-cad software supplied with each
25/100 Series
ffFull address range (1 - 127) FIRElink detector calculates the length
ffCompatible with all FIRElink detectors of pipe and configuration of sampling Prices and further details provided upon request.
and command modules holes required for each installation.
ffSupports both single and multi mode
Prices and further details provided upon request.
operation
72
ANCILLARY
Equipment
74
YBD-RA TE-TLE SOLO POLES TESTIFIRE SOLO 200
A Surface Wiring Adaptor which allows A Loop Emulator System which consists Fibreglass Poles designed to be A fully portable field device for A Universal Detector Removal Tool
the majority of Hochiki Sensors/ of Software and a Hardware Interface completely interchangeable with all functional testing of fire detectors. suitable for the majority of current
Detectors and their Mounting Bases to that together allow a ‘virtual’ loop of the SOLO Tools. Manufactured in The unit is suitable for testing optical/ Hochiki detectors*
be fitted flush against a fixing surface, to be created on a PC connected to a a lightweight fibreglass, the poles photoelectric and ionisation smoke
*Except those with flying leads, for
whilst also allowing surface wiring Fire Alarm Control Panel. In this way, are completely non-conductive and sensors, thermal sensors (fixed
example the DFG-60E or the ACB-EW.
(without conduit) to be connected. a complete fire detection system can have been subjected to rigorous temperature or rate-of-rise), and
be tested and proven before any actual conductivity testing to ensure the carbon monoxide (CO) fire sensors, ffColour-coded grips twist into place to
ffLow profile - only 16mm create different size combinations
ffCompatible with the majority of existing hard-wiring commences, saving time integrity of the insulating qualities. be they conventional, addressable or
ffUniversal, counterbalanced joint
Analogue and Conventional bases and resources. ffLightweight, non conductive analogue addressable.
ensures the tool remains horizontal
ffColour matches standard Hochiki ffSaves time and installation costs as the ffAccept all of the SOLO tools ffPowered by battery batons within pole
Analogue and Conventional sensor/ whole system can be tested ‘virtually’ ffCan extend to 9m ffHeat detector test times reduced
detector / base ranges
ffAllows simulation of up to 4 loops of through wider range of settings
Hochiki analogue devices (127 per loop) ffClearing cycle provides rapid detector
ffSystem ‘Cause and Effect can be reset with no repeat alarm
verified along with double address and ffStimuli capsules for smoke and CO held
circuit simulation within unit
ffFaster, more productive testing with
just one tool
ffSimultaneous stimuli (smoke and heat)
can cut test times in multi-sensors by
up to 66%
75
SOLO 330 SOLO 423/424 SOLO 461 SOLO 823 KIT HE-PSU(2.5A)
A Smoke Detector Tester providing A Heat Detector Tester mains-powered A Cordless Heat Detector Tester which A Universal Set Of Tools for testing and A Stand-Alone Power Supply Unit with
functional testing to introduce and available in both 110/120 and utilises Cross Air Technology to ensure removing smoke and heat detectors integrated charger designed to be
(simulated) smoke or CO through the 220/240 V versions. the correct temperature is applied to up to 9m high. used with Hochiki’s FIRElink range of
detector vents and into the sensing ffInitiates heat detectors into alarm, the sensing elements, not the detector air sampling detectors and the CHQ
Contains:
chamber. whether rate of rise or fixed. plastics. Modules that are non loop-powered
ffComes complete with a 5m lead as ff1 x Solo 100 Telescopic Pole (CHQ-DZM, CHQ-DZM(IS) and CHQ-DSC).
ffRobust, lightweight design ffSafe, cable free, battery-powered
standard (Optional 5m ff3 x Solo 101 Extension Pole
ffTouch sensitive, ideal for suspended operation ffEnclosure mounted with battery space
extension available) ff1 x Solo 330 Aerosol Smoke Dispenser
ceilings ffSupplied with 2 Battery BatonsTM ffFully enclosed and robust construction
and a fast charger ff1 x Solo 461 Cordless Heat Detector
ffClear cup allows view of detector LED ff110 V or 230 V input
Test Kit (includes 2 Battery Batons™
ffSpring-loaded dispenser mechanism ffIntelligent device, only heats when ffRegulated, true 24 V output
and Charger)
conserves aerosol detector present
ff1 x Solo 610 Protective Carrying Bag ffHouse up to 26 Ah batteries
ffTest gas canisters (non CFC) ffStatus indicators for monitored faults
ff1 x Solo 200 Universal Detector
are available containing either
Removal Tool ffIntelligent battery charging and
simulated smoke ( for testing smoke
temperature compensation
detectors) or CO (for testing CO
detectors). ffDual output for powering fire alarm
control panels remotely
76
HE-PSU(5.25A) SMB -1 SMB - 2 SMB - 3 PL - 3
A Stand-Alone Power Supply Unit An IP66 Rated, Grey (RAL7035) An IP66 Rated, Grey (RAL7035) A Grey (RAL7035) Enclosure Designed Additional Programming Lead 3 Way
with integrated charger designed Enclosure designed for use with the Enclosure designed for use with for use with the Hochiki range of DIN Connection For use on Hochiki devices
to be used with Hochiki’s FIRElink Hochiki range of Modules. Supplied the Hochiki range of DIN Modules. Modules. Supplied with a transparent that feature the square programming
range of air sampling detectors and with a transparent black lid as standard. Supplied with a transparent black lid black lid as standard. The unit is terminal, HCP-E(SCI) call points for
the CHQ Modules that are non loop- Used in conjunction with the SMB- as standard. The unit is supplied with supplied with a DIN Rail section (plus example. The jack plug fits into the
powered (CHQ-DZM, CHQ-DZM(IS) and ADAPTOR this enclosure can house any a DIN Rail section (plus fixings) and fixings) and will accept up to four socket on the TCH-B200 programmer
CHQ-DSC2). of the PCB assemblies from the Hochiki will accept up to six Hochiki DIN Rail Hochiki DIN Rail Modules, side-by-side. and the square programming plug fits
ffEnclosure mounted with battery space Smart-Fix Module range. Modules, side-by-side. ff20 knock-outs to the device.
ff110 V or 230 V input ff32 knock-outs ffQuick-release screws ffQuick-release screws ffAllows connection of TCH-B200
ffRegulated, true 24 V output ffGrey lid available SMB-1(LID) ffPolyurethane gasket provides IP66 ffPolyurethane gasket provides IP66 programmer
ffHouse up to 26 Ah batteries ffQuick-release screws Polyurethane protection protection ffFor use with Hochiki devices with
ffStatus indicators for monitored faults gasket provides IP66 protection ff32 knock-outs ffSupplied with DIN Rail and fixings square connector
ffFully enclosed and robust construction ffTemperature resistance to +70°C, ffSupplied with DIN Rail and fixings ffGrey lid available SMB-3(LID)
ffDual output for powering fire alarm Impact resistant, and Non-flammable ffGrey lid available SMB-2(LID) ffTemperature resistance to +70°C,
control panels remotely ffCorrosion free, resistant to most ffTemperature resistance to +70°C, Impact resistant, and Non-flammable
ffIntelligent battery charging and alkaline and acid Impact resistant, and Non-flammable ffCorrosion free, resistant to most
temperature compensation ffCorrosion free, resistant to most alkaline and acid
alkaline and acid ffDesigned to house up to 4 Hochiki DIN
ffDesigned to house up to 6 Hochiki DIN Modules
Modules
77
REMOVAL TOOL - 3 CHQ - SUB CHQ - BACKBOX CHQ - ADAPTER MBB-2
Outer Cover Removal Tool allows the The CHQ-SUB Assembly is a set of The Module Backbox is designed for Adaptor for the New CHQ Modules A Marine Back Box providing a splash
case of any photoelectric sensor or replacement components designed to installations where the CHQ Range of designed to allow the “Smart-Fix“ proof and secure fixing for the Hochiki
detector to be removed easily, even if fit any of the existing CHQ Modules: Modules - CHQ-DIM(SCI), range of CHQ Modules to be housed in ESP and CDX Marine Approved
the locking tabs have been employed. CHQ-DIM2(SCI), CHQ-SZM2(SCI), CHQ-SZM(SCI), CHQ-DZM(SCI), existing enclosures originally designed Range of Sensors and Detectors and
This allows easy access to the CHQ-DZM(SCI), CHQ-DSC2(SCI), CHQ-DSC(SCI),CHQ-MRC(SCI), for the first generation CHQ-OEM their associated Bases. Provides an
photoelectric chamber for maintenance CHQ-MRC2(SCI), CHQ-DRC2(SCI), CHQ-DRC(SCI) & CHQ-PCM Modules by modifying the ‘footprint’ of aesthetically pleasing solution where
or replacement. Fits ALN-EN, ACC-EN CHQ-ISM & CHQ-PCM. require mounting within a glanded the unit. surface fixed devices are required. The
and ATJ-EN only. The sub-assembly consists of the PCB enclosure. The unit features ten ffFootprint matches older enclosure sizes housing supports four 20mm glanded
tray, PCB cover and semi-opaque lid knock-outs suitable for cable glands ffAllows the PCB component of a CHQ entries for cabling access.
and can be used in cases where an (not supplied) and accepts the CHQ Module to be housed in an enclosure ff4 Glanded cable entry holes (glands
existing module housing becomes Modules directly as a lid. not supplied)
damaged and needs replacement. ffProvides glanded cable connections ffColour matched
ffUsed to replace damaged components ffCompatible with all CHQ Modules ffApproved Sensor and Base range
ffCompatible with all CHQ Modules ffRobust design ffProvides moisture and dust resistant
fixing
ffRobust design
ffIdeal for bulk-head fixing
ffApproved to by GL
ffGL Type approval
ffNon-marine use version available
(SBB-2)
78
SI - CAP2
A Protective Cap which can be fitted to
the YBO-R/SCI isolator base range, the
YBO-BS base sounder or the YBO-BSB
base sounder beacon when either of
these devices isn’t fitted with a sensor.
It can also fit the YBN-R/3 and the
YBN-R/3(SCI).
ffEasy to Fit (Twist-fit)
ffProtects Wiring Terminals on Isolator
Bases and Base Sounders
79
A Guide To Our Sounder/ Beacon Variants Example product code
CHQ - WSB2(WHT) / RL
YBO-BSB2 CHQ-WSB2
An Addressable Loop-Powered An Addressable Loop-Powered
Base Sounder Beacon Wall Sounder Beacon
80
A Guide To Our Conventional Beacon Variants
Conventional
CWST-RR-W5 Red Red W-2.4-6.2 C-3-9.4 C-6-8.6 -
Beacon
Conventional
CWST-RR-S5 Red Red W-2.4-6.2 C-3-9.4 C-6-8.6 -
Beacon
CWST-S5
Conventional
A Conventional Beacon CWST-RW-S5 White Red W-2.4-9.0 C-3-9.5 C-6-9.5 C-9-9.5
Beacon
Conventional
CWST-RW-W5 White Red W-2.4-9.0 C-3-9.5 C-6-9.5 C-9-9.5
Beacon
Conventional
CWST-WR-S5 Red White W-2.4-6.2 C-3-9.4 C-6-8.6 -
Beacon
Conventional
CWST-W5 Beacon
CWST-WR-W5 Red White W-2.4-6.2 C-3-9.4 C-6-8.6 -
A Conventional
Weatherproof Beacon Conventional
CWST-WW-W5 White White W-2.4-9.0 C-3-9.5 C-6-9.5 C-9-9.5
Beacon
Conventional
CWST-WW-S5 White White W-2.4-9.0 C-3-9.5 C-6-9.5 C-9-9.5
Beacon
81
A Guide To Our Ceiling Beacon Variants
CHQ - CB(WHT) / WL Product Type Product Code LED Case EN54-23 Ratings
Colour Colour
WHT = White Case WL = WHITE LEDs
RED = Red Case RL = RED LEDs
0 1 2
CHQ-CB
An Addressable Loop-Powered Ceiling Beacon CHQ-CB (WHT)/WL-15 White White O C-3-10 C-3-15
Ceiling Beacon
82
A Guide To Our Wall Beacon Variants
CHQ - WB(WHT) / WL Product Type Product Code LED Case EN54-23 Ratings
Colour Colour
WHT = White Case WL = WHITE LEDs
RED = Red Case RL = RED LEDs
0 1 2
CHQ-WB
An Addressable Loop-Powered Wall Beacon CHQ-WB(RED)/WL White Red 0 W-3.10 W-3.15
Wall Beacon
83
Guides from Hochiki
84
Index
9-5-0-419/ISS13/JUN19
EN Systems Catalogue