Professional Documents
Culture Documents
ME 324 - Midterm 2 - Fall 2014 - Unknown
ME 324 - Midterm 2 - Fall 2014 - Unknown
Dynamics
Name:
EID:
Section:
Instructions:
1) This exam is CLOSED book, apart from the class equation sheet.
4) Write down the "Given" and "Find" information for each problem.
1 20
2 20
3 20
Total 60
Problem 1.
Rod AB rotates counterclockwise with a constant angular
velocity = /. Determine the velocity and acceleration
of point C located on the double collar when = °. The
collar consist of two pin-connected slider blocks which are
constrained to move along the circular path and the rod AB.
1/4
Problem 2.
The tied crank and gear mechanism gives rocking motion to
crank AC, necessary for the operation of a printing press. If
link DE has the angular motion shown, determine the
respective angular velocities of gear F and crank AC at this
instant, and the angular acceleration of crank AC.
2/4
Problem 3.
The 10 lb block rests on a surface for which = . . It is acted
upon by a radial force of 2 lb and a horizontal force of 7lb, always
directed at ° from the tangent to the path as shown. If the
block is initially moving in a circular path with a speed =
/ at the instant the forces are applied, determine the time
required before the tension in cord AB becomes 20 lb. Neglect the
size of the block for the calculation.
3/4
4/4