Professional Documents
Culture Documents
API 510. DAILY EXAM 3 (Closed Book)
API 510. DAILY EXAM 3 (Closed Book)
a. 176.0 psig
b. 215.6 psig
c. 183.3 psig
d. None of above
2. Part MAWP for lower dished head in vertical vessel will generally be:
4. The rules for impact testing of carbon steel in Section VIII vessel
materials require what kind(s) of impact test.
a. 220.00 psi
b. 208.66 psi
c. 204.33 psi
d. 191.34 psi
a. 220 psi
b. 250 psi
c. 200 psi
d. 260 psi
a. 10 mm
b. 8 mm
c. 7 mm
d. 9 mm
12. ASME Sec. VIII, Div. 1 permits which of the following nozzle
constructions?
a. “Set-in” type
b. “Set-on” type
c. Both (a) and (b)
d. None of (a) or (b)
16. The material not requiring PWHT by code requirement has been
heat-treated. The PWHT carried out on this material is most
likely due to:
a. -26F
b. -30F
c. -22F
d. -16F
a. Full radiography
b. Spot radiography
c. For both a and b
d. For none of a or b
a. 5 years
b. Till the MDR is signed
c. 3 years
d. 10 years
20. Pneumatic test should be carried out on a vessel at 300 psig. The
design temperature and the test temperature are same. What is
the test pressure and in how many steps the pressure should be
applied.