The document compares two ground fault locators: the Eagle Eye GFL-1000 and the Megger BGFT. The Eagle Eye GFL-1000 has advantages including a built-in ripple filter, color LCD displays, pinpointing faults below 1MΩ, testing online systems, a wider fault sensitivity range of 1-1000 kΩ, a variable output voltage of 24-1000V, and frequency analysis capabilities. The Megger BGFT lacks some of these features, such as filters, oscilloscope functions, and can only detect faults between 1-399 kΩ.
The document compares two ground fault locators: the Eagle Eye GFL-1000 and the Megger BGFT. The Eagle Eye GFL-1000 has advantages including a built-in ripple filter, color LCD displays, pinpointing faults below 1MΩ, testing online systems, a wider fault sensitivity range of 1-1000 kΩ, a variable output voltage of 24-1000V, and frequency analysis capabilities. The Megger BGFT lacks some of these features, such as filters, oscilloscope functions, and can only detect faults between 1-399 kΩ.
The document compares two ground fault locators: the Eagle Eye GFL-1000 and the Megger BGFT. The Eagle Eye GFL-1000 has advantages including a built-in ripple filter, color LCD displays, pinpointing faults below 1MΩ, testing online systems, a wider fault sensitivity range of 1-1000 kΩ, a variable output voltage of 24-1000V, and frequency analysis capabilities. The Megger BGFT lacks some of these features, such as filters, oscilloscope functions, and can only detect faults between 1-399 kΩ.
Anti-Interference Filter Built-in ripple filter No Filter Transmitter: Color LCD Transmitter: Analog & Digital Display Receiver: Color LCD Receiver: Analog & Digital 1. Judgement of signal strength Method of Fault Location 2. Current direction to fault 1. Judgement of signal strength 3. Phase angle change Yes - Pinpoint leakage fault with grounding re- Grounding Resistance Test Yes sistance lower than 1MΩ Distribution Capacitance Test Yes Yes Test Online System Yes Yes Fault Sensitivity 1 – 1000 kΩ 1 – 399 kΩ Output Voltage 24 – 1000 V 1 – 50 V Output Current 0.5 – 50 mA 0 – 1.7 A Selectable between 0.5, 1, 2.5, 5, 10, 20, 50, Output Frequency 20 Hz 100, 200, 325 Hz for various DC systems Yes – Signal receiver has Frequency Analysis frequency spectrum analysis function to analyze No the surrounding signal to bypass interferences Yes – Display waveform before & after using Oscilloscope No band pass filter