Professional Documents
Culture Documents
1 - METRIX 1.0 Catalogue With VLF
1 - METRIX 1.0 Catalogue With VLF
Surge ranges/timer/Hipot voltage/ Burn voltage & current Cable Drums - 30mtr (other lengths are also
Pre-location mode TDR, ICM, SIM & Decay. Help menu available in system
Working Principle
Function
Surges of high voltage are passing into the faulty cable
The surge wave receiver is a sensitive amplifier circuit: It has two
through a suitable surge tester; a magnetic field is developed
separate channels magnetic and acoustic. The acoustic channel is a
around the cable. When the ground microphone is kept
wideband pass filter and the magnetic is a high frequency active filter.
perpendicular to the ground surface of the underground
The main function of the receiver is to amplify the signal which is cable, the magnetic channel will start to indicate the presence
received from the ground microphone and displayed on LCD display. of a magnetic signal and show on LCD bar graph and
To adjust the level of amplification separate level control for magnetic depending on the soil and fault condition, the noise and
vibrations are received by it from a certain distance and the
and volume control for acoustic channels is provided on the front
acoustic channel starts showing its presence.
panel.
When reached at the fault point the acoustic bar-graph
display is at its maximum level, hence achieving the pin-
pointing of cable fault in the shortest possible time.
Technical Details SLE 200-Z
Specifications
Acoustic Magnetic Synchronous Pin-pointing Acoustic channel
Accuracy 0.1m
Indication of direction to
Yes
the fault Compass
Weight 0.6 Kg
Standard Accessories
Ground Sensor
Headphone
Connecting Cables
Carrying Case
Instruction Manual
CRT 10D
Cable Route Tracer
Cable Route Tracer CRT 10D is an essential item in the kit for fault
location of underground power and telecom cable network. It is a Applications
powerful audio frequency system that can be effectively used for
It is used for route tracing of any underground metallic cable in
various unique functions such as route tracing of any metallic cable,
power transmission, distribution and signal cable networks or
depth measurement, live loaded cable tracing and ground survey of
cable fault location service provider.
underground utilities.
Function
The audio frequency signal passes through the cable conductor an
electromagnetic field of sending frequency is developed around on
the conductor. When the search coil axis is passing in the developed
field, it will sense the field and give it to the receiver unit.
Indication Analog meter indication to indicate of transmitted power and matching ON Indication
Power Supply 230V AC +10%, 50 Hz Single phase or external 12 Volt DC of Internal rechargeable accumulator
Operating Time Internal accumulator 1.5 Hrs on 10 Watts Mains and Ext. DC Power supply no time limit.
Receiving Frequency Receiving three kinds of sinusoidal AC signals of different frequencies, namely low frequency, intermediate
Receiving Mode Crest method (horizontal coil), trough method (vertical coil), external device method (A-frame, coupling clamp).
Signal interface Three interfaces of digital size, grating length, and voice prompt simultaneously indicate the strength of the signal
Detection length When directly connected to the cable, the maximum length 10 km.
When coupling cables, one coupling can measure 3Km, and multiple couplings are infinite. When the cable
is inducted, it can measure 300m in one induction and infinitely in many times.
Depth Measurement Direct reading detection depth, range 000-250cm. 80% method for measuring depth, range 000-250cm (induction)
Power Source Standard No. 5 1.2V rechargeable battery 6, charge and discharge 500 time
Standard Accessories
Transmitter Tongs CTS120 Connecting Cords
CI 60S-D
Digital Cable Identification System
A Digital Cable Identification System is an essential item in the kit for Applications
fault location of underground power cable networks. It consists of an Cable Identification System can be effectively used to identify
Identification Transmitter, Digital Identification Receiver, and any power cable low, medium, high or extra high voltage single
Identification Tongs. The system is used for the identification of or multi core cable of any grade, size and insulation in any
wanted cables from the bunch of cables in a power cable network. power distribution networks companies.
Specifications
Cable Identification Transmitter PG 60S
Power Supply 230V Ac +10%, 50 Hz, Single phase or from built in-Accumulator with internal charging supply
Impulse Voltage 36 V
Indication Analog moving coil meter for output current, Charging Indication,
Weight 1.08 kg
Standard Accessories
Mains supply cord
Earthing cable
MTVLF
Very Low Frequency HV Generator
Load Carrying Capacity 0.1 Hz < 1.1 μF 0.1 Hz < 1.1 μF 0.1 Hz < 0.5 μF
General
Power Supply 220 V + 5%
Power Frequency 50 Hz
Controller 350mm x 310mm x 410 mm 410mm x 230mm x 520 mm 350mm x 310mm x 410 mm
Weight
Controller 4 Kg
Bosster 25 Kg 50 Kg 75 Kg
Operational Environment
Notes : 1. The Instrument is accompanied with Test & Calibration sheet. 2. Test Facilities can be provided at the factory with the available test set-ups only. 3. The company's policy includes
continuous improvement of its product. We, therefore, reserve the right of any deviation from illustration or specifications without notice. 4. Stated accuracies are valid from 10% of the
0 0
range to 95% of the range. 5. Accuracy specified for temperature range of 25 C + 5 C & 55% RH + 10%.
Contact Details
THE MOTWANE MANUFACTURING CO. PVT. LTD.
www.motwane.com
https://www.linkedin.com/company/motwanemanufacturing