Professional Documents
Culture Documents
Regulatory Procedure
(GUIDE OF PAKISTAN STANDARDS & QUALITY
CONTROL LICENSING REQUIREMENT)
PREPARED BY:
LEGAL SERVICES CELL, B&SDS
2017
HEAD OFFICE
4th Floor, Building No. 3, Aiwan-e-Iqbal Complex, Egerton Road,
Lahore
Tel: (92 42) 111 111 456, Fax: (92 42) 36304926-7
helpdesk@smeda.org.pk
3rdFloor, Building No. 3, 5TH Floor, Bahria Ground Floor Bungalow No. 15-A
Aiwan-e-Iqbal Complex, Complex II, M.T. State Life Building Chaman Housing
Egerton Road Lahore, Khan Road, Karachi. The Mall, Peshawar. Scheme
Tel: (042) 111-111-456 Tel: (021) 111-111- Tel: (091) 9213046-47 Airport Road, Quetta.
Fax: (042) 36304926-7 456 Fax: (091) 286908 Tel: (081) 2831623,
helpdesk.punjab@smeda. Fax: (021) 5610572 helpdesk- 2831702
org.pk helpdesk- pew@smeda.org.pk Fax: (081) 2831922
khi@smeda.org.pk helpdesk-
qta@smeda.org.pk
Regulatory Procedure GUIDE OF PAKISTAN STANDARDS & QUALITY CONTROL LICENSING REQUIREMENT
Table of Contents
1 DISCLAIMER .................................................................................................................... 3
2 INTRODUCTION OF SMEDA ........................................................................................ 4
3 ROLE OF LEGAL SERVICES CELL, SMEDA ............................................................ 4
4 APPLICABLE LAW & RELEVANT AUTHORITY ..................................................... 5
5 LICENSING REQUIREMENTS ...................................................................................... 5
6 PROCEDURE TO OBTAIN LICENSE ........................................................................... 8
6.1 PRELIMINARY INSPECTION ............................................................................................. 8
6.2 GENERAL SAMPLING PROCEDURE: ................................................................................. 9
6.3 PERIODICAL INSPECTIONS: ............................................................................................. 9
6.4 LABORATORY TESTS: ..................................................................................................... 9
6.5 GRANT OF C.M. LICENSE: ............................................................................................ 10
6.6 FEES TO BE PAID BY LICENSEES: ................................................................................. 10
7 PUNISHMENT ................................................................................................................. 10
8 FLOW CHART OF LICENSING PROCEDURE ........................................................ 10
9 IMPORTANT ADDRESSES ........................................................................................... 12
10 SCHEDULE OF TESTING FEE .................................................................................... 13
Regulatory Procedure GUIDE OF PAKISTAN STANDARDS & QUALITY CONTROL LICENSING REQUIREMENT
1 Disclaimer
This information memorandum is to introduce the subject matter and provide a general idea
and information on the said matter. The information has been provided on as is where is basis
without any warranties or assertions as to the correctness or soundness thereof. Although, due
care and diligence has been taken to compile this document, the contained information may
vary due to changes in law and procedures at various times. SMEDA, its employees or agents
do not assume any liability for any financial or other loss resulting from the use of this
memorandum. The prospective user of this memorandum is encouraged to carry out due
diligence and gather any information which is necessary for making an informed decision,
including taking professional advice in addition to relying upon the memorandum.
For more information on services offered by SMEDA, please contact our website:
www.smeda.org.pk
3
Regulatory Procedure GUIDE OF PAKISTAN STANDARDS & QUALITY CONTROL LICENSING REQUIREMENT
2 Introduction of SMEDA
The Small and Medium Enterprises Development Authority (SMEDA) was established in
October 1998 with an objective to provide fresh impetus to the economy through development
of Small and Medium Enterprises (SMEs).
With a mission "to assist in employment generation and value addition to the national income,
through development of the SME sector, by helping increase the number, scale and
competitiveness of SMEs", SMEDA has carried out „sectoral research‟ to identify policy,
access to finance, business development services, strategic initiatives and institutional
collaboration and networking initiatives.
Preparation and dissemination of prefeasibility studies in key areas of investment has been a
successful hallmark of SME facilitation by SMEDA.
Concurrent to the prefeasibility studies, a broad spectrum of business development services is
also offered to the SMEs by SMEDA. These services include identification of experts and
consultants and delivery of need based capacity building programs of different types in addition
to business guidance through help desk services.
4
Regulatory Procedure GUIDE OF PAKISTAN STANDARDS & QUALITY CONTROL LICENSING REQUIREMENT
5 Licensing Requirements
License means a license granted under this Act to use Pakistan Standard and Quality
mark in relation to any article, product or process which conforms to the relevant
Pakistan Standard.
As per the Act items notified in the official gazette under Certification are required to
put the PS Mark of Quality on the Certificates issued in conformity to Pakistan
Standards. The manufacture, keeping in stock and sale of items fall under Certification
Marks Scheme/without C.M. License is prohibited. So every item falling under
Certification should have the below mark on it:
5
Regulatory Procedure GUIDE OF PAKISTAN STANDARDS & QUALITY CONTROL LICENSING REQUIREMENT
S# Subject PSS #
1 AC Watt hour meters 60521
2 Asbestos Cement Building and Sanitary Pipes 429
3 Asbestos Cement Corrugated for roofing & cladding 1653
4 Asbestos Cement pipe fitting for building and sanitary purposes 2035
5 Asbestos Cement pressure pipes 428
6 Asbestos Flat Sheets 579
7 Apple Juice PS: 1738 - 2000
8 Balanced Feed Mixture for Live Stock 234
9 Ballast for Tubular Fluorescent Lamp – Performance 497
Requirements
10 Banaspati 221
11 Biscuits (Excluding Wafer Biscuits) 383
12 Butter PS: 1831 - 1997
13 Carbonated Beverages 1654
14 Bottled Drinking Water 4639
15 Cold Worked Steel Deformed Bars for the Reinforcement of 1612
Concrete
16 Cooking Oil (Blended) 2858
17 Cotton Seed Oil Cake Expeller Type 96
18 Chilly Powder PS: 1742 - 1997
19 Concentrated Fruit Juice PS: 527 - 1992
20 Condensed Milk PS: 364 - 1991
21 Curry Powder PS: 1741 - 1997
22 Deformed & Plain Billet Steel Bars 1879
23 Discharge Lamps/Compact Flourescent Lamps (H.S.Code PS/IEC :60968 &
8539,3200,8539,3910 & 8539, 3990) PS/IEC:60969
24 Edible Sesame Seed Oil 98
25 Food for Infants and Children PS: 1688 - 1985
26 Flavoured Milk PS: 3189 - 1992
27 Fruit Squash PS: 506 - 1997
28 Gas Appliances-General Requirements 4860
29 Gas Applied fired Room Heater-Vented 4859
30 Gas Cooking Range 4857
31 Gas Cooking Stoves 1560
32 Gas Fired Radiant Room Heaters un-vented & semi-vented 3656
type
33 Gas Water Heaters 4858
34 Honey PS: 1934 - 2007
35 Iodized Salt 1669
36 Jams ( Fruit preserve ) & Jellies PS: 2096 - 1989
37 Lead Acid Batteries (for Motorcycles) 4082
38 Lead Acid Starter Batteries (for motorcar) 206
39 Margarine 1653
40 Mayonnaise PS: 3947 - 1997
41 Marmalade PS: 514 - 1985
42 Milk Powder (whole and Skim) PS: 363 - 1991
43 Methods for measuring the performance of electric kettles, jugs 253
for house holds and similar purposes
44 Methods for measuring the performance of Electric Toasters 661
6
Regulatory Procedure GUIDE OF PAKISTAN STANDARDS & QUALITY CONTROL LICENSING REQUIREMENT
7
Regulatory Procedure GUIDE OF PAKISTAN STANDARDS & QUALITY CONTROL LICENSING REQUIREMENT
8
Regulatory Procedure GUIDE OF PAKISTAN STANDARDS & QUALITY CONTROL LICENSING REQUIREMENT
9
Regulatory Procedure GUIDE OF PAKISTAN STANDARDS & QUALITY CONTROL LICENSING REQUIREMENT
7 Punishment
A licensed manufacturer should display relevant Pakistan Standards number and
the mark on the packing. No person shall use authority mark except under a
license issued from PSQCA. Any person contravening the provisions of authority
under various sections could be punished by imprisonment to one year or fine of
Rs. 50,000/- or both.
Source:
http://www.psqca.com.pk/caw/enforcement-of-standards.htm
10
Regulatory Procedure GUIDE OF PAKISTAN STANDARDS & QUALITY CONTROL LICENSING REQUIREMENT
11
Regulatory Procedure GUIDE OF PAKISTAN STANDARDS & QUALITY CONTROL LICENSING REQUIREMENT
9 IMPORTANT ADDRESSES
PSQCA Complex:
Plot NO St- 7/A, Block-3, Scheme No. 36, Gulistan-e-Juhar, Karachi – Pakistan
Phone: +92-21-99261891
QCC Lahore:
PSQCA Emails
psqcadg@super.net.pk
dgeneral@psqca.com.pk
12
Regulatory Procedure GUIDE OF PAKISTAN STANDARDS & QUALITY CONTROL LICENSING REQUIREMENT
13
Regulatory Procedure GUIDE OF PAKISTAN STANDARDS & QUALITY CONTROL LICENSING REQUIREMENT
b. COPPER ALLOYS
i. up to 6 elements -- 5000
ii. up to 8 elements -- 7000
c. STEEL ALLOYS (for one Element)
i. 01 to 05 elements (C, Mn, P. S, Si) -- 4000
ii. 01 to 05 elements (C, Cr, Mn, Ni, -- 5000
P. S, Si)
iii. 01 to 05 elements (C, Cr, Mn, Mo, -- 6000
Ni, P. S, Si)
iv. Complete analysis (10 Elements) -- 8000
Note
1- Testing fee per test will be Rs 1500/- except where indicated or where complete
testing is not required.
2- Full Testing fee will be charged for sample submitted for re testing.
3- The charges will be doubled for urgent reporting.
4- The testing charges for samples not included in the above schedule will be at the
discretion of the Director/Incharge of the Centre.
5- The tariff will be provided at the time of submission of sample and will depend on the
nature number of tests etc.
6- The payment on account of testing fee will be accepted in advance through pay orders
from authorized Bank. The Director/Incharge of the Centre could, however, permit
testing of samples against bill or cash payment in rare and urgent cases.
7- The samples for testing are also provided by SDC for items under Compulsory
Certification Marks Scheme and charges for these are paid by the industries from
where these samples are periodically picked up by Field Officers of SDC for quality
control.
14
Regulatory Procedure GUIDE OF PAKISTAN STANDARDS & QUALITY CONTROL LICENSING REQUIREMENT
15
Regulatory Procedure GUIDE OF PAKISTAN STANDARDS & QUALITY CONTROL LICENSING REQUIREMENT
Note
1. Testing fee per test will be Rs 1000/- except where indicated or where complete testing is not
required.
2. Full Testing fee will be charged for sample submitted for re testing.
3. The charges will be doubled for urgent reporting.
4. The testing charges for samples not included in the above schedule will be at the discretion of the
Director/Incharge of the Centre.
5. The tariff will be provided at the time of submission of sample and will depend on the nature
number of tests etc.
6. The payment on account of testing fee will be accepted in advance through pay orders from
authorized Bank. The Director/Incharge of the Centre could, however, permit testing of samples
against bill or cash payment in rare and urgent cases.
7. The samples for testing are also provided by SDC for items under Compulsory Certification Marks
Scheme and charges for these are paid by the industries from where these samples are periodically
picked up by Field Officers of SDC for quality control.
16
Regulatory Procedure GUIDE OF PAKISTAN STANDARDS & QUALITY CONTROL LICENSING REQUIREMENT
TEXTILE SECTION
S. NO. SUBJECT PS. No. Revised Fees (Rs.)
1. Polypropylene Woven Sacks for Packing Sugar 3128 6800
A. Construction Analysis
I. Count ------ 600
II. Denier ------ 1200
III. Ends/picks ------ 600
IV. Course/Wales ------ 600
V. Weight/GSM ------ 600
VI. Dimensions (length/width) ------ 600
VII. Weave ------ 600
VIII. Thickness ------ 600
IX. Pile ratio ------ 600
B. Fiber Composition and Chemical Analysis
I. Fiber analysis ------
a. Binary 1200
b. Additional 600
II. Blend ratio ------ 1200
III. Oil content ------ 600
IV. Fat content ------ 600
V. Starch content ------ 1200
VI. Moisture content ------ 600
VII. Copper content ------ 1200
VIII. Sizing material ------ 1200
IX. Proofing material ------ 1200
X. Scouring loss ------ 1200
XI. Nature of dye ------ 1200
XII. pH ------ 600
C. Colour Fastness
I. Washing ------
c. Staining on Cotton 600
d. Staining on Multifiber 1200
II. Perspiration ------ 600
III. Crocking/Rubbing ------ 600
IV. Light ------ 600
D. Physical Analysis
I. Dimensional change/Shrinkage ------ 600
II. Tensile Strength ------ 1200
III. Tearing Strength ------ 1200
IV. Seam Strength ------ 600
V. Bursting Strength ------ 1200
VI. Elongation% ------ 600
VII. Water repellency ------ 600
VIII. Absorbency ------ 600
17