Professional Documents
Culture Documents
Wheel Loader Specifications: Service Weight 13.7 T - 14,5 T Engine Output 130 KW Loading Buckets 2.3 - 6.0 M
Wheel Loader Specifications: Service Weight 13.7 T - 14,5 T Engine Output 130 KW Loading Buckets 2.3 - 6.0 M
Specifications L 25.5
2
ctro-hydraulic servo control, new deluxe cab
Electronic immobilizer
standard
Fuel-efficient 6-cylinder
Cummins engine delivers
130 kW (177 HP)
Easy service-
ability from the
ground
3
Proven Lear geometry again improved
4
stant across the entire lift range and any slackening of lift
force (as is typical on Z-geometry) is ruled out. What’s more,
this system guarantees absolutely precise until now una-
chievable parallel control at all working positions (optional
function). Two sensors constantly record the positions of
Lift height (m) the lift frame and tilt control lever. The actual values are
4 Z-geometry PZ-geometry Universal geometry then electronically compared with the stored target data
3,5 and the working attachment is automatically guided into
the ideal position. This makes life a lot easier for the ope-
3
rator who need not make continuous adjustments.
2,5
The structure is of simple and hence rugged design. Ope-
2
rator visibility is excellent. A taller dump height and ideal
1,5
reach have improved truck loading functions considerably.
1 The mast profile is redesigned to prevent damage to the
0,5 truck‘s sidewalls.
0
40 50 60 70 80 90 100 110 120 130 140
Breakout force (kN)
Lift Tilt
cylinder cylinder 3rd function
Engine RPM
Priority circuit
Position
sensors
5
Smart electro-hydraulic control
Innovative developments and longstanding experience in bility. No mechanical/hydraulic components and hence no
microchip technology have enabled O&K to completely re- servicing or repair of such components.
design the wheel loader electronic control system. Until
The electro-hydraulic system also takes care of additional
now, the various functions had been performed by a large
functions such as ground-level return-to-load after dump-
number of mechanical-hydraulic components, on the L 25.2
ing or bucket shake-out intensity.
these basic and supplementary functions are mastermin-
ded electro-hydraulically by smart software. When the lift Electronic control handles many of the chores previously
frame rises to exceed a certain height, the electronics au- left to the operator. Controllability is significantly improved
tomatically shuts off the lifting function. Re-setting the desi- and the multifunctional lever works as smoothly and effort-
red lift height is just as uncomplicated. Instead of the hard- lessly as a joystick.
ware adjustments required previously, now the operator
simply presses the ”teach-in” key and the new maximum
height is immediately stored. This makes the work a lot
easier for the operator and improves the equipment’s flexi-
The clean, water-cooled Cummins engine with turbocharger service life. The outstanding torque curve and the low idling
and intercooler has a lot extra power. Teamed up with the speed combine to deliver ample lugging forces and fuel
new transmission, the engine generates higher torque and efficiency.
improved tractive forces while the low speeds extend
6
Single-handedly
Bigger bucket
7
Weights and dimensions
48°
1050
3900
3355
2810
46°
40°
3255
7300
with tyres
20.5 R 25 EM
Width over tyres mm 2465
Track mm 1940
Ar tic angle ° +/- 42
Overall length mm 7465
Turning radius (to outside edge of bucket)
(bucket in carry) mm 6045
Turning radius (to outside edge of tyres) mm 5495
*Including all lubricants, a full tank, 20.5 R 25 L-3 tyres, ROPS/FOPS cab and operator. Ser vice weight and static
tipping load depend on tyres and/or any special equipment.
All figures approximate.
8
Engine Tyres
Universal Lear geometry for both ear thmoving and industrial ap-
Transmission plications • Frame from solid steel with torsion-stiff cross-mem-
bers • Sealed mounting points • Multi-functional lever
Full powershift, 4 for ward and 3 reverse gears shifting on-the-go
Function Lift Lower Dump Total
• Automatic shifting • Multi-functional lever for gear shifting and
Sec. 5.5 3.0 2.2 10.7
loader functions
Axles Cab
9
Standard equipment Optional equipment
Alterations without prior notice. The illustrations do not necessarily show the standard version of the machine. Any statement on
E 574.1/2-0101 the quality or use of the products shall be deemed approximate and without obligation and not construed to be an express warranty
Printed in Germany of quality or merchantability. Performance shall expressly be governed by the contractual agreement.