Professional Documents
Culture Documents
Dlw5btn Series
Dlw5btn Series
Large Current
Data Sheet 1
Common Mode Choke Coil Wire Wound Type for Large Current
DLW5BT Series (2020 Size)
c Dimensions c Impedance-Frequency Characteristics (Main Items)
Polarity Marking * The marking to 10000
indicate the product Common mode
direction can be
applicable. DLW5BTN142SQ2
(Optional) DLW5BTN102SQ2
1000
DLW5BTN501SQ2
DLW5BTN251SQ2
Impedance (Ω)
DLW5BTN101SQ2
100
0.45 min.
(T) 2.35±0.15
3.6±0.3 0.5 min.
1.7±0.3
(1) (2)
10
DLW5BTN101SQ2
DLW5BTN251SQ2
DLW5BTN501SQ2
DLW5BTN102SQ2
DLW5BTN142SQ2 Differential mode
: Electrode 1
1.7±0.3
(4) (3)
No polarity.
oThis data sheet is applied for CHIP COMMON MODE CHOKE COIL used for General Electronics equipment for your design.
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2012.3.1
http://www.murata.com/
Noise Suppression Products/EMI Suppression Filters > Common Mode Choke Coil > Wire Wound Type for Large Current
Data Sheet 2
2000
1000
0
0 20 40 60 80 100
65 85
Operating Temperature (°C)
c !Caution/Notice
!Caution (Rating) Notice
Do not use products beyond the rated current and Solderability of Tin plating termination chip might be
rated voltage as this may create excessive heat deteriorated when low temperature soldering profile
and deteriorate the insulation resistance. where peak solder temperature is below the Tin melting
point is used. Please confirm the solderability of Tin
plating termination chip before use.
oThis data sheet is applied for CHIP COMMON MODE CHOKE COIL used for General Electronics equipment for your design.
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2012.3.1
http://www.murata.com/