Professional Documents
Culture Documents
Unigraphics (UG) NX Interview Questions and Answers
Unigraphics (UG) NX Interview Questions and Answers
1. Airthmatic Expressions
2. Conditional Expressions
3. Geometric Expressions
11) What is Direct Modeling or Synchronous Modeling?
Direct modeling techniques represents extended capabilities for some of the more basic Unigraphics functions. Among
these are face oriented operations, constraint based methods, blend regeneration and independence of feature history.
You can use Direct modeling functions on models that have been imported from other CAD systems and are non-
parametric.
1. Solid Modeling
2. Feature Based Modeling
3. Free Form Modeling
4. Sheet Metal Feature Modeling
27) What is Co-ordinate System? How many types of Co-ordinate Systems are there in Unigraphics?
Co-ordinate System is a reference element. It uses X,Y and Z co-ordinates while creating model.
Following are the three types of Co-ordinate Systems
28) What is the difference between Rotational WCS & Dynamic WCS?
In Rotational WCS we can give the angle by which the WCS need to rotate by typing it in the space provided, while in
Dynamic WCS we can dynamically rotate the WCS and give the angle.
29) What is the difference between Sketch Curves & Basic Curves?
Sketch curve are parametric and can constrain but basic curves are non parametric and cannot constrain them.
30) How many types of geometrical constrains are there in Unigraphics NX?
There are 22 types of Geometrical constrains in Unigraphics NX.
32) In which command do you find strings, apex string, and spline string?
We find these options in section command of free form feature.
35) What is the displayed part and work part. Where does it come?
Displayed parts are the parts which can only be displayed but not editable while we can both display and edit a work
part. Both displayed part and work part comes under assembly.
42) How many ways to find the sketch is fully constrained in Unigraphics?
There are three ways to find the sketch is fully constrained. 1) In sketch environment (status bar) 2) In part navigation
3) Checkmate
49) What is the default tolerance for angle and distance in Unigraphics?
Angle – o.5
Distance – 0.0254
56) What is the difference between Face blend and Soft blend?
A face blend can be created between the faces of solid and / or sheet bodies. The faces can be non adjacent and/ or part
of a different sheet body.
Soft blends let you create blends whose cross sectional shape is not circular.
57) What is the difference between datum plane and fixed datum plane?
A Datum plane is a reference plane that serves as aid when existing planes are not available. The datum plane can be
editor later. The fixed datum plane are datum planes which cannot be edited later.
60) What is the maximum number of guide curves used in Swept operation?
The maximum number of guide curves used in Swept operations is Three (3)