Professional Documents
Culture Documents
Skyair Non Inverter R 410a Cooling Only Type 201709142324162961
Skyair Non Inverter R 410a Cooling Only Type 201709142324162961
Warning Ask a qualified installer or contractor to install this product. Do not try to install the product by yourself.
Improper installation can result in water or refrigerant leakage, electrical shock, fire or explosion.
Use only those parts and accessories supplied or specified by Daikin. Ask a qualified installer or contractor to
install those parts and accessories. Use of unauthorised parts and accessories or improper installation of parts
and accessories can result in water or refrigerant leakage, electrical shock, fire or explosion.
Read the user's manual carefully before using this product. The user's manual provides important safety
instructions and warnings. Be sure to follow these instructions and warnings.
If you have any enquiries, please contact your local importer, distributor and/or retailer.
Các đặc tính kỹ thuật, kiểu dáng và thông tin trong cuốn sách này có thể thay đổi mà không cần báo trước. All rights reserved
Printed in Vietnam 06/16/001 DAV
New wide lineup of SkyAir series.
Product Lineup
Series 09 13 18 21 24 26 30 36 42 48
Btu/h 9,200 13,000 18,000/17,700*1 21,000 24,200 26,000 30,000 36,000/34,500*2/35,000*3 42,600/42,000*3,4 48,000
kW 2.7 3.8 5.3/5.2*1 6.2 7.1 7.6 8.8 10.6/10.1*2/10.4*3 12.5/12.3*3,4 14.1
CEILING MOUNTED
CASSETTE TYPE
Round Flow
Indoor unit FCNQ13MV1 FCNQ18MV1 FCNQ21MV1 FCNQ26MV1 FCNQ30MV1 FCNQ36MV1 FCNQ42MV1 FCNQ48MV1
Outdoor unit RNQ13MV1 RNQ18MV1 RNQ21MV1 RNQ26MV1 RNQ26MY1 RNQ30MV1 RNQ30MY1 RNQ36MV1 RNQ36MY1 RNQ42MY1 RNQ48MY1
SUSPENDED
TYPE
Indoor unit FHNQ13MV1V FHNQ18MV1V FHNQ21MV1V FHNQ24MV1V FHNQ26MV1 FHNQ30MV1V FHNQ30MV1 FHNQ36MV1V FHNQ36MV1 FHNQ42MV1 FHNQ48MV1
Outdoor unit RNQ13MV1V RNQ18MV1V RNQ21MV1V RNQ24MV1V RNQ26MY1 RNQ30MV1V RNQ30MY1 RNQ36MV1V RNQ36MY1 RNQ42MY1 RNQ48MY1
Pair
CONNECTION PRESSURE
TYPE
MIDDLE STATIC
PRESSURE
TYPE
Outdoor unit RNQ09MV1V RNQ13MV1V RNQ13MV1 RNQ18MV1V RNQ18MV1 RNQ21MV1V RNQ21MV1 RNQ24MV1V RNQ26MV1 RNQ26MY1 RNQ30MV1V RNQ30MV1 RNQ30MY1 RNQ36MV1V RNQ36MV1 RNQ36MY1 RNQ42MY1 RNQ48MY1
Note : *1Applicable to FDBNQ series. *2Applicable to FHNQ-MV1V *3Applicable to FHNQ-MV1 series. *4Applicable to FDMNQ series.
1 2
CEILING MOUNTED CASSETTE TYPE Round Flow
Cassette air conditioner with 360° Avoids uneven temperature and discomfort caused by drafts
43/32
pressure level
raised 1℃.
dB(A)
High Low
FCNQ36M
(220V)
3 4
CEILING MOUNTED CASSETTE TYPE Round Flow
Fine square panels Compact body and quiet operation Easier to maintain
dB(A)
Panel size is same for all models, FCNQ13-48M.
It is easy to maintain a neat appearance when
Indoor unit
Sound pressure level
The condition of the drain pan and the
open
multiple units are installed. High Low
drain water can be checked by Just on grille
!
13/18M 31 28 c t i
mm 95 removing the drain plug and su
950 0m Note : Anechoic chamber
21/26M 35 28
m Same for conversion value, measured
suction grille.
Drain plug
all models 30/36M 43 32 according to JIS parameters
and criteria. During
42M 44 34 operation these values are
somewhat higher owing to
48M 44 36 ambient conditions. With Ultra long-life filters (option), maintenance is not required in normal shops or offices
for up to four years.
Optimal comfort and convenience Quick and easy to install Options required for specific operating environments
assured by 2 air discharge modes Just 256 mm high. Installable in tight
ceiling spaces (13-26M)
Setting to prevent soiling Ultra long-life filter unit Sealing material of air discharge outlet
Air direction Standard setting1
of ceiling2 (field setting) Even in dusty environments where the air Sealing material block air discharge openings not used in 2-way or
conditioning is on most of the time, the ultra long-life 3-way blow.
Desired Standard position to Recommended for shops with
256 mm *1 266 mm *2
light coloured ceilings that filter only has to be cleaned once a year.
situation prevent draft. must be kept spotless.
Filter chamber
Branch duct (direct-connection round duct)
(Can be used with high-efficiency filter)
A round duct can be attached without the need for a chamber.
Auto-swing Auto-swing between Auto-swing between *1 298 mm high with 30-48M A flanged port for direct connection of a round duct is provided. An
15° and 60° 25° and 60° *2 308 mm high with 30-48M
existing branch duct chamber can also be fitted (square slit hole).
5-levels
air direction
setting
Settable to 5 different
levels between 15° and 60°
Settable to 5 different
levels between 25° and 60° Easy height adjustment
Ultra long-life filter Fresh air intake kit Note 1.2 Outside
Criteria for ceiling height and number of air discharge outlets suction grill lines can be Please use if you think the temperature and humidity Flexible duct
(Ceiling height is reference value) unified when multiple inside the ceiling exceeds 30°C and RH 80%,
units are installed. respectively. T-duct joint
Number of air discharge outlets used
Suction
13-26M 30-48M Top panel insulation(1) Intake duct
Drain pump is equipped as standard
chamber
(procured locally)
All round 4-way 3-way 2-way All round 4-way 3-way 2-way Top panel insulation(2) Connection (duct length: 4 m max.)
Standard
flow flow flow
2.7 m 3.1 m 3.0 m 3.5 m
flow flow flow flow
3.2 m 3.4 m 3.6 m 4.2 m
flow
accessory with 850 mm lift. Top panel insulation(3)
chamber
Ceiling
High ceiling 3.0 m 3.4 m 3.3 m 3.8 m 3.6 m 3.9 m 4.0 m 4.2 m
Insulation for decoration panel Direct installation type
height Side panel insulation
High ceiling 3.5 m 4.0 m 3.5 m - 4.2 m 4.5 m 4.2 m - Suspension bracket insulation KDDP55X160A
Note: Factory settings are for standard ceiling height and all-round flow.
High ceiling settings (1) and (2) are set with the remote controller by field setting. 850 mm
Panel spacer
Two selectable temperature-sensors 175 mm
Use when only minimal space is available between Duct flange
Both indoor unit and wired remote controller (option) contain temperature- drop ceilings and ceiling slabs.
(with insulation material)
Intake duct
sensors. Temperature sensing can be set at the unit or, to further improve
comfort level, closer to the target area at the wired remote control. This Transparent drain socket (procured locally)
feature must be set during commissioning by the technicians. Because the drain socket is
Note: 1 Use of options will increase operating sound.
*Temperature-sensor on indoor unit must be used when the air conditioner is controlled from another room. transparent, after the drain piping 2 Connecting ducts, fan, insect nets, fire dampers, air filters, and other parts
**Wireless remote controller does not have a temperature-sensor. has been installed, it is easy to 40mm should, as required, be procured locally.
check if the drain come out Panel spacer 3 When a local-procured fan is used, an interlock with air conditioner is
Switchable fan speed: High/Low through the socket. necessary.Optional PCB(KRP1C63)is required for interlocking.
4 It is recommended that the volume of outdoor air introduced through the kit is
Note: Some ceiling constructions may hinder installation.
limited to 10% of the maximum airflow rate of the indoor unit. Introducing higher
On/Off timer DIII-NET communication standard Contact your Daikin Dealer before installing your unit.
quantities will increase the operating sound and may also influence temperature
sending.
Operation starts when the preset time of the ON timer elapses and stops Connection to a centralised control system is available
when the preset time of the OFF timer elapses. without option.
5 6
CEILING SUSPENDED TYPE
compact system.
Sound pressure level
Indoor unit
High Low
Auto-swing (up&down) brings comfort to the room 13M 43 39
18/21M 44 40
Wide air discharge Air is blown up to 50° in
24/26/30M 45 40
openings produce a the downward direction
36/42M 48 42
FHNQ spreading 100° airflow
48M 49 43
NEW 13/18/21/24/30/36MV1V
26/30/36/42/48MV1
Uses quiet stream fan and other quiet
50°
technologies.
100°
44/40
pressure level
Switchable fan speed: High/Low
High Low
dB(A)
Programme "Dry"
Easy maintenance
FHNQ21M
(220V) Dehumidification is microprocessor controlled to prevent abrupt and Long-life filter (standard) requires no
Option
Accessory required for indoor unit.
uncomfortable changes in air temperature. maintenance for about 1 year*
The filter is washable and reused after 1 year.
Wired LCD remote controller * For dust concentration of 0.15 mg/m3
Two time settings (2500 hrs and 1250 hrs) are available to match the
installation environment. Maintenance time warning is displayed on
BRC1NU61
Non-flocking flap
Note: Remote controller cable is not
freedom of design Condensation does not easily
included and must be procured form on and dirt does not
locally. Uniform height and depth. Compact design for cling to non-flocking flap.
It is easy to clean.
small-capacity models to meet tighter dimensional Non-flocking flap
constraints
(mm) Easy-clean, flat surfaces
Wireless LCD remote controller Indoor unit 13M 18/21M 24/26/30M 36/42/48M It is easy to wipe dirt off the flat side and lower
A signal receiver must be added to the indoor unit.
surfaces of the unit.
Height 195
Width 960 1,160 1,400 1,590
BRC7NU66 Depth 680 For all maintenance tasks, access is
from bottom surface
Flexible installation
Signal receiver unit (Installed type)
The unit fits more snugly into tight spaces.
7 8
DUCT CONNECTION LOW STATIC PRESSURE TYPE DUCT CONNECTION MIDDLE STATIC PRESSURE TYPE
Ideal for quiet, beautiful living spaces Unit can be mounted in the ceiling and
air can be delivered freely by duct
Option Accessory required for indoor unit Option Accessory required for indoor unit
FDBNQ FDMNQ
Wired LCD remote controller Wired LCD remote controller
NEW 09/13/18/21/24MV1V 26/30/36/42/48MV1
26MV1
BRC1C61 BRC1C61
Note: Remote controller cable Note: Remote controller cable
is not included and must is not included and must
be procured locally. be procured locally.
BRC1E62 BRC1E62
Note: Remote controller cable Note: Remote controller cable
is not included and must is not included and must
be procured locally. be procured locally.
Sound Sound
43/40 45/37
pressure level pressure level
Wireless LCD remote controller Wireless LCD remote controller
dB(A) A signal receiver must be added to the indoor unit.
dB(A) A signal receiver must be added to the indoor unit.
High Low High Low
FDBNQ26M
(220V)
BRC4C64 FDMNQ36M
(220V)
BRC4C64
door between the rooms. Note: The under-door cutout method should be used only when there is a small volume of airflow.
9 10
OUTDOOR UNIT
Whatever your space, give it the comfort
it deserves
NEW RNQ09MV1V NEW RNQ18MV1V NEW RNQ24MV1V NEW RNQ30MV1V NEW RNQ36MV1V RNQ36MV1
NEW RNQ13MV1V RNQ18MV1 RNQ26MV1 RNQ30MV1 RNQ36MY1
RNQ13MV1 NEW RNQ21MV1V RNQ26MY1 RNQ30MY1 RNQ42MY1
RNQ21MV1 RNQ48MY1
Note:
1
Additional refrigerant charging is required if the refrigerant pipe is longer than the
length.
Durability
Operation sound
(In case of RNQ09-21M:220-240 V, RNQ24-30M:220 V/380 V, As the bottom frame is subject to corrosion,
240 V/415 V, RNQ36-48M:380 V, 415 V) dB(A)
corrosion-proof galvarium steel plate is adopted
Outdoor unit Sound level to enhance the durability
RNQ09MV1V 48
RNQ13MV1V/RNQ13MV1 49 Heat exchange fins are provided with
RNQ18MV1V/RNQ18MV1 51 anti-corrosion treatment (Applies to RNQ09-26, 36-48M)
RNQ21MV1V/RNQ21MV1 52
To achieve increased durability by improved resistance to salt corrosion
RNQ24MV1V 54 and atmospheric pollution, Anti corrosion treated fin for heat exchangers
RNQ26MV1/RNQ26MY1 54 (with special coating) are used for the heat exchanger of the outdoor unit.
RNQ30MV1V/RNQ30MV1/RNQ30MY1 55 Construction
11 12
REMOTE CONTROLLER Optional accessory
Easy-to-read LCD remote controller allows various system control configurations and can control multiple indoor units.
Remote controller options are shown on the page introducing each indoor unit model.
Dot matrix display Backlight Remote controller is equipped with model name
A combination of fine dots display The wireless remote controller is and failure display functions. This facilitates
enables various icons. supplied in a set with a signal service in the unlikely event of a malfunction.
receiver. (Model name display function applies to BRC1E62 only.)
Large text display is easy to
see. Signal receiver unit is contained
inside decoration panel or indoor
unit. SkyAir shares common control with
Shape of signal receiver unit Heat Reclaim Ventilator and the
differs according to the indoor other Daikin air-conditioning units,
unit. thus simplifying interlocking
Energy saving BRC7F633F
operations.
NEW Setpoint auto reset NEW Setpoint range set Signal receiver unit Easily adaptable to large-scale, high-function,
Wireless remote (For ceiling mounted Note: The signal receiver unit shown in the centralised remote control systems.
controller cassette type) photograph is for mounting inside
- Even if the set temperature is changed, it returns to the preset temperature - Saves energy by limiting the Installing and connecting control wiring between
the decoration panel of the ceiling
after a preset period of time. min. and max. set temperature. mounted cassette type. SkyAir and other Daikin air-conditioning
- Period selectable from 30min/60min/90min/120min. - Avoids excessive heating or equipment is easy.
Restaurant sample cooling.
Restaurant opened Full tables at lunchtime After 30 minutes* - This function is convenient when Wireless remote controller for each indoor unit type
Temperature is set to 27ºC Then is lowered to 24ºC for Automatically returns to preset the remote controller is installed CEILING MOUNTED CASSETTE TYPE BRC7F633F
crowded room temperature (27ºC)
Returns to at a place where any number of CEILING SUSPENDED TYPE BRC7NU66
27°C 24°C 27 °C
automatically
people may operate it. DUCT CONNECTION LOW STATIC PRESSURE TYPE BRC4C64
DUCT CONNECTION MIDDLE STATIC PRESSURE TYPE BRC4C64
13 14
REMOTE CONTROLLER Optional accessory FUNCTIONS
Functions
CASSETTE TYPE CEILING SUSPENDED LOW STATIC MIDDLE STATIC
Round Flow TYPE PRESSURE TYPE PRESSURE TYPE
Control Applicable
Wired remote controller Wireless remote controller
overview
pattern model
Control by 1
remote (Basic system)
Cooling only Indoor unit FCNQ13-48MV1 FHNQ13-48MV1(V) FDBNQ09-26MV1(V) FDMNQ26-48MV1
controller FCNQ Non-polar, double-core Signal receiver unit installed
(max. wiring length 500 m) on indoor unit RNQ13-36MV1 RNQ13-36MV1(V) RNQ09-24MV1V RNQ26-36MV1
Outdoor unit
RNQ26-48MY1 RNQ26-48MY1 RNQ26MY1 RNQ26-48MY1
For control from Control by 1 wireless remote
Control by 2 2 locations such Auto swing
FDBNQ controller and 1 wired remote
remote as in room and controller (See note 2, 3)
Swing pattern selection
controllers control room, Connects 2 wired remote Signal receiver unit installed
exits, etc. controllers (See note 1) on indoor unit
DC fan mortor (Indoor unit)
FDMNQ
Comfort Switchable fan speed 2step 2step 2step 2step
For
Group simultaneous Programme “Dry”
control control of up to
16 indoor units. Automatic address setting function Automatic address setting function High ceiling application *6
Signal receiver unit installed
on 1 indoor unit Two selectable temperature-sensors *1
Operation and
monitoring is Setpoint auto reset *2
Control by carried out using (Command from outside) (Command from outside)
Centralised control, with setting as Centralised control of on/off by Unified control of weekly schedule With its high functionality, the full Note: *1 : Applicable when wired remote controller is used *5 : Applicable to RNQ09-26, 36-48M outdoor unit
simple as it is with a standard group or all at once for up to 256 for up to 1,024 indoor units. colour “all-in-one” graphic controller
*2 : Applicable when BRC1E62 is used *6 : Installable on max. 3.5 m high ceiling
remote controller, of up to 64 groups indoor units. Schedule timer sets on/off time in 1 minute units to facilitates management of SkyAir
(1,024 indoor units) is possible. be executed twice a day for a week at a time. System in a variety of ways. *3 : Applicable to RNQ30-48M *7 : Applicable when BRC1C61 is used
*4 : Applicable to RNQ09-26M *8 : Option
15 16
FUNCTIONS
Control features
setting
Two selectable temperature-sensors
Temperature-sensors are included in the indoor unit and
Auto-restart External command control
DC fan motor (indoor unit) optional wired remote controller. Temperature sensing closer
to target area is possible to further increase the comfort level. If there is a power outage while the equipment is operating, Operation and monitoring is carried out using the contact
DC fan motor improves efficiency. operations will restart in the same mode as before the power signal from the operation control box in the building
Use the temperature-sensor in
the indoor unit when controlling cut when electricity is restored. monitoring room.
Switchable fan speed air conditioning from another
room.
*An option is required.
High setting provides maximum reach while low setting Control by 2 remote controllers Central remote control
minimises drafts. Note: Wireless remote controllers have no
Using 2 remote controllers you can operate the equipment
temperature-sensor. Optional central remote controller enables centralised control of
locally or from a remote location.
Programme "Dry" Note: When a wireless remote controller is used, remote control by two
up to 1024 indoor units (64 groups) from up to 1 km away.
Cleanliness Others
Anti corrosion treated heat exchangers
Anti-bacterial air filter
To achieve increased durability by improved resistance to salt corrosion and atmospheric pollution, Anti corrosion treated fin for heat
The air filter has an anti-bacterial treatment to help prevent the growth of bacteria and mould on it. exchangers (with special coating) are used for the heat exchanger of the outdoor unit.
In high corrosive areas, regular maintenance needs to be carried out.
17 18
SPECIFICATIONS
Note :
1
Rated cooling capacities are based on the following conditions: Indoor temp., 27°CDB, 19.0°CWB; outdoor temp. 35°CDB, 24°CWB. Equiv. refrigeration piping, 7.5 m (horizontal).
CEILING SUSPENDED TYPE
2
Capacities are net, including a deduction for cooling for indoor fan motor heat.
3
The operation sound is measured in anechoic chamber. If it is measured under the actual installation conditions, it is normally over the set value due to environmental noise and sound reflection.
30 36 42 48
Indoor unit FHNQ30MV1V FHNQ30MV1 FHNQ36MV1V FHNQ36MV1 FHNQ42MV1 FHNQ48MV1
Model
Name V1 RNQ30MV1V --------- RNQ36MV1V --------- --------- ---------
Outdoor unit
Y1 --------- RNQ30MY1 --------- RNQ36MY1 RNQ42MY1 RNQ48MY1
Power supply V1 1 Phase, 220–240 V, 50 Hz --------- 1 Phase, 220–240 V, 50 Hz ---------
Outdoor unit
Y1 --------- 3 Phase, 380–415 V, 50 Hz --------- 3 Phase, 380–415 V, 50 Hz
Cooling capacity1,2 kW 8.8 10.1 10.4 12.3 14.1
Rated (Min.- Max) Btu/h 30,000 34,500 35,000 42,000 48,000
Power consumption Cooling1 kW 3.07 3.07 3.43 3.64 4.51 5.51
COP W/W 2.87 2.94 2.86 2.73 2.56
CSPF Wh/Wh 3.05 3.12 3.04 2.90 2.72
Colour White
Indoor
Airflow rate (H/L) m3/min 26-27/22-23 38-40/23-25 42-44/24-26
unit
cfm 918-953/777-812 1,341-1,412/812-883 1,483-1,553/847-918
Sound pressure level (H/L) (220 V)3 dB(A) 45/40 48/42 49/43
Dimensions (HXWXD) mm 195X1,400X680 195X1,590X680
Machine weight kg 32 35
Certified operation range °CWB 14 to 25
Colour Ivory white
Outdoor
Compressor Type Hermetically sealed rotary type Hermetically sealed scroll type
unit
Motor output kW 2.2 2.7 3.75 4.5
Refrigerant charge (R-410A) kg 1.9 3.4 3.2 2.7 3.2
(Charged for 15 m) (Charged for 15 m) (Charged for 15 m) (Charged for 15 m) (Charged for 15 m)
Sound pressure level3 dB(A) 55 57 54 56 58
Dimensions (HXWXD) mm 990X940X320 1,430X940X320 1,345X900X320
Machine weight V1 kg 77 --------- 97 --------- --------- ---------
Y1 kg --------- 74 --------- 103 107 111
Certified operation range °CDB 21 to 46
Piping Liquid (Flare) mm o/ 9.5
connections Gas (Flare) mm o/ 15.9
Drain Indoor unit mm VP20 (I.D o/ 20XO.D o/ 26)
Outdoor unit mm o/ 26.0 (Hole)
Max. interunit piping length 50
m (Equivalent length 70)
Max. installation level difference m 30
Heat insulation Both liquid and gas piping
Note :
1
Rated cooling capacities are based on the following conditions: Indoor temp., 27°CDB, 19.0°CWB; outdoor temp. 35°CDB, 24°CWB. Equiv. refrigeration piping, 7.5 m (horizontal).
2
Capacities are net, including a deduction for cooling for indoor fan motor heat.
3
The operation sound is measured in anechoic chamber. If it is measured under the actual installation conditions, it is normally over the set value due to environmental noise and sound reflection.
19 20
SPECIFICATIONS OPTIONS
Indoor unit
DUCT CONNECTION LOW STATIC PRESSURE TYPE CEILING MOUNTED CASSETTE TYPE
09 13 18 21 24 26 Kit name
Name of option Remark
Indoor unit FDBNQ09MV1V FDBNQ13MV1V FDBNQ18MV1V FDBNQ21MV1V FDBNQ24MV1V FDBNQ26MV1 FCNQ13MV1 FCNQ18MV1 FCNQ21MV1 FCNQ26MV1 FCNQ30MV1 FCNQ36MV1 FCNQ42MV1 FCNQ48MV1
Model Decoration panel BYCP125K-W1
Name V1 RNQ09MV1V RNQ13MV1V RNQ18MV1V RNQ21MV1V RNQ24MV1V ---------
Outdoor unit Sealing material of air discharge outlet KDBH55K160F
Y1 --------- --------- --------- --------- --------- RNQ26MY1
Panel spacer KDBP55H160FA
Power supply V1 1 Phase, 220–240 V, 50 Hz
Outdoor unit Fresh air Chamber Without T-duct joint KDDP55B160 (Components:KDDP55C160-1, KDDP55B160-2)2
Y1 --------- 3 Phase, 380–415 V, 50 Hz type
intake kit1 With T-duct joint KDDP55B160K (Components:KDDP55C160-1, KDDP55B160K2)2
Cooling capacity1,2 kW 2.7 3.8 5.2 6.2 7.1 7.6
Rated (Min.- Max)
Direct installation type KDDP55X160A
Btu/h 9,200 13,000 17,700 21,000 24,200 26,000
High-efficiency filter unit (Colorimetric method 65%) KAFP556C80 KAFP556C160
Power consumption Cooling1 kW 0.72 1.09 1.68 2.04 2.40 2.62 (including filter chamber) (Colorimetric method 90%) KAFP557C80 KAFP557C160
COP W/W 3.75 3.49 3.10 3.04 2.96 2.90
Replacement (Colorimetric method 65%) KAFP552B80 KAFP552B160
CSPF Wh/Wh 3.98 3.71 3.29 3.23 3.14 3.08 high-efficiency filter (Colorimetric method 90%) KAFP553B80 KAFP553B160
Indoor Colour ----------
Filter chamber KDDFP55C160
unit Fan Airflow rate (H/L)3 m3/min 13/11 18/15 35/24 18/15 Replacement long-life filter KAFP551K160
cfm 459/388 635/530 1236/847 635/530
Ultra long-life filter unit (including filter chamber) KAFP55C160
Rated external static pressure3 mmH2O 2.0
Replacement ultra long-life filter KAFP55H160H
Sound pressure level (H/L) (220 V)4 dB(A) 41/38 43/40 46/39 43/40
Branch duct chamber KDJP55B80 KDJP55B160
Dimensions (HXWXD) mm 260X900X580 260X1,300X580 305X1,550X680 260X1,300X580
Chamber connection kit3 KKSJ55KA160
Machine weight kg 25 32 51 32
Insulation kit for high humidity KDTP55K80 KDTP55K160
Certified Operation range °CWB 14 to 23 14 to 25
Remote controller Wireless type Cooling only BRC7F633F
Outdoor Colour Ivory white
Wired type4 BRC1C61
unit Compressor Type Hermetically sealed rotary type
Navigation Remote Controller Wired type4 BRC1E62
Motor output kW 0.65 0.9 1.4 1.8 1.9 2.2
Central remote controller5 DCS302CA61
Refrigerant charge 0.9 1.2 1.4 1.5 1.9 2.0
(R-410A)
kg
(Charged for 10 m) (Charged for 10 m) (Charged for 10 m) (Charged for 10 m) (Charged for 10 m) (Charged for 10 m)
Unified ON/OFF controller5 DCS301BA61
Schedule timer5 DST301BA61
Sound pressure level4 dB(A) 48 49 51 52 54
intelligent Touch Controller5 DCS601C51
Dimensions (HXWXD) mm 550X765X285 595X845X300 735X825X300
Adaptor for wiring6 KRP1C63
Machine weight V1 35 36 40 49 57 ----------
kg Wiring adaptor for electrical appendices(2)6 KRP4AA53
Y1 ---------- ---------- ---------- ---------- ---------- 56
Installation box for adaptor PCB KRP1H98A
Certified Operation range °CDB 19.4 to 46 21 to 46
Remote sensor (for indoor temperature) KRCS01-4B
Piping Liquid (Flare) mm o/ 6.4 o/ 9.5
connections Note: 1Refer to page 6 for the details.
Gas (Flare) mm o/ 9.5 o/ 12.7 o/ 15.9 2
Please order using the names of both components instead of set name.
Drain Indoor unit mm 3/4B (I.Do/ 21.6XO.Do/ 27.2) 3
Required for installing high-efficiency filter unit and ultra long-life filter unit.
4
Outdoor unit mm o/ 18.0 (Hole) Wiring for wired remote controller to be procured locally.
5
Max. interunit piping length The indoor unit is equipped standardly with the interface adaptor for SkyAir series. An option is unnecessary.
30
m 30 (Equivalent length 50 m)
6
Installation box for adaptor PCB (KRP1H98A) is necessary.
Round flow type: List of optional parts required to achieve different flow patterns
For each flow pattern – all round, 4-way, 3-way, 2-way, branch duct connection – the compatibility of each independently installed option
(shown in the column on the left) to accessory options (listed across the top of each table) is shown in the cells where the relevant row and column intersect.
DUCT CONNECTION MIDDLE STATIC PRESSURE TYPE A circle (o) indicates compatibility, and a cross (x) indicates incompatibility. Any options not shown below are not suitable for independent or accessory installation.
26 30 36 42 48
Indoor unit FDMNQ26MV1 FDMNQ30MV1 FDMNQ36MV1 FDMNQ42MV1 FDMNQ48MV1
Model
V1 RNQ26MV1 RNQ30MV1 RNQ36MV1 --------- --------- All round flow 4-way flow
Name Outdoor unit
Y1 RNQ26MY1 RNQ30MY1 RNQ36MY1 RNQ42MY1 RNQ48MY1 Optional accessory parts Panel spacer1
Wireless Fresh air intake kit Fresh air intake kit High-humidity High-efficiency Ultra-long-life
Independently installable optional parts remote controller (Chamber type)1,2 (direct mount) operation kit filter2 filter2
Power supply V1 1 Phase, 220–240 V, 50 Hz ---------
Outdoor unit Panel/grille related Panel spacer 1
o o o x o o
Y1 3 Phase, 380–415 V, 50 Hz
Cooling capacity1,2 kW 7.6 8.8 10.6 12.3 14.1 Operation control related Wireless remote controller o o o o o o
Rated (Min.- Max) Btu/h 26,000 30,000 36,000 42,000 48,000 Auxillary function related Fresh air intake kit (Chamber type)1,2 o o x x o o
Power consumption Cooling1 kW 2.62 3.03 3.53 4.49 5.56 x
Fresh air intake kit (direct mount) o o o o o
COP W/W 2.90 3.00 2.74 2.54
CSPF Wh/Wh 3.08 3.19 2.91 2.70
High-humidity operation kit x o x o x x
Colour ---------- Filter related High-efficiency filter2 o o o o x x
Indoor
unit Fan Airflow rate (H)3 m3/min 23 37 42 Ultra-long-life filter2 o o o o x x
cfm 812 1,306 1,483
8.5 9.8 8.0
Rated external static pressure3 mmH2O
Sound pressure level (H/L) (220 V)4 dB(A) 42/38 44/36 45/37 46/37
3-way flow 2-way flow
Dimensions (HXWXD) mm 305X1,350X680 305X1,550X680 Optional accessory parts Wireless Fresh air intake kit Fresh air intake kit High-humidity High-efficiency Ultra-long-life
Panel spacer1
Machine weight kg 43 52 Independently installable optional parts remote controller (Chamber type)1,2 (direct mount) operation kit filter2 filter2
Note :
1
Rated cooling capacities are based on the following conditions: Indoor temp., 27°CDB, 19.0°CWB; outdoor temp. 35°CDB, 24°CWB. Equiv. refrigeration piping, 7.5 m (horizontal).
2
Capacities are net, including a deduction for cooling for indoor fan motor heat.
3
Please see fan characteristic document in detail.
4
The operation sound is measured in anechoic chamber. If it is measured under the actual installation conditions, it is normally over the set value due to environmental noise and sound reflection.
21 22
OPTIONS DIMENSIONS (Unit: mm)
67
Wired type1 BRC1NU61
160
160
860~910(Ceiling opening space) (Note 4)
Side
167
Note: 1Wiring for wired remote controller to be procured locally.
93
95
110
124
29
95
157 157
350 Connection position 350 Connection position
950
C of branch duct of branch duct
(square-shaped type) (square-shaped type)
B arrow view B arrow view
6
Drain Connection
DUCT CONNECTION LOW STATIC PRESSURE TYPE Side
7 [FCNQ13-26MV1] [FCNQ30-48MV1]
Kit name 420
Name of option Remark A arrow view 160
FDBNQ09MV1V FDBNQ13MV1V FDBNQ18MV1V FDBNQ21MV1V FDBNQ24MV1V FDBNQ26MV1 160 167
Connection position Connection position
Remote controller Wireless type BRC4C64 of branch duct 124 of branch duct 93 67
(square-shaped type) 109 (square-shaped type) 95
Wired type1 BRC1C61 [FCNQ13-26MV1] [FCNQ13-26MV1] 95 29
20-M4 20-M4
Navigation Remote Controller Wired type1 BRC1E62 16-M4 Prepared hole Prepared hole Prepared hole
55 840 55 Connection position 55 840 55
Adjustable(0~675)
Note: 1Wiring for wired remote controller to be procured locally. 20-M4 Prepared hole
2x100=200 80
80
340 of branch duct 3 81 2x100=200 85
80 2x100=200 80 (square-shaped type) 64 124 5
160
124
850
2x100=200
124
25
25
50
124
110
350
157
124
350
110
95
157
105
60
95
C/L C/L
213
256
213
246
175
165
160
125
80
42
130
80
DUCT CONNECTION MIDDLE STATIC PRESSURE TYPE 35 or less Connection position ø10
(kn 0
Connection position ø10
(kn 0
90
20 C/L
90
256 35 or less of branch duct of branch duct
50
40
1500 or more
157 (Note 4) (round shape type) (round shape type)
Kit name Hanging bolt 350 90 ) 90 )
Name of option Remark 4-M8~M10 4 1 2 Connection position 350 Connection position Connection position 183 Connection position 196
FDMNQ26MV1 FDMNQ30MV1 FDMNQ36MV1 FDMNQ42MV1 FDMNQ48MV1 280
of branch duct of branch duct of fresh air intake kit of fresh air intake kit
Connection position (round shape type) A (square-shaped type)
Remote controller Wireless type BRC4C64 of branch duct 330 (direct installation type) C arrow view (direct installation type) C arrow view
Wired type1 BRC1C61 (round shape type)
Navigation Remote Controller Wired type1 BRC1E62
Note: 1Wiring for wired remote controller to be procured locally.
[FCNQ30-48MV1] [FCNQ30-48MV1]
16-M4 Prepared hole Required space 1500mm or more
200mm or more
55 840 55 55 840 55 1500mm
Adjustable(0~675)
Connection position
340 of branch duct 27-M4 Prepared hole 1500mm or more
3 81 2x100=200 85 or more
80 2x100=200 80 (square-shaped type)
Outdoor unit
64 160 5 200mm
160 or more 1500mm or more
850
167
50
167
95
95
93
The necessary space is 500mm or more when the
105
60
29
air-outlet is blocked with the accessory.
Kit name
160
Moreover when the corner areas are blocked
298
288
RNQ09MV1V RNQ13MV1V RNQ18MV1V RNQ21MV1V RNQ24MV1V ------- RNQ30MV1V RNQ36MV1V ------- ------- ------- (both right and left of the blocked air outlet),
175
160
29
42
Name of option the necessary space is 200mm or more.
125
165
130
1500 or more 67
------- RNQ13MV1 RNQ18MV1 RNQ21MV1 ------- RNQ26MV1 RNQ30MV1 ------- RNQ36MV1 ------- ------- 35 or less
20 C/L 256 35 or less
50
40
RNQ26MY1 RNQ30MY1 RNQ36MY1 RNQ42MY1 RNQ48MY1
Notes:
1
Sticking location for manufacture's label
manufacture's label for indoor unit: 1 Liquid pipe connection
Suction grille inner side's electric components box's lid surface 2 Gas pipe connection
manufacture's label for decoration panel :
3 Drain pipe connection
Decoration panel's corner decoration cover inner surface
2
In case of using wireless remote controller, this position will be a signal receiver. Refer to the drawing of wireless remote controller 4 Power-source wiring and a unit
in detail. wiring connection
3
When the temperature and humidity in the ceiling exceed 30˚C and RH 80% or the fresh air is inducted into the ceiling or the unit 5 Connection wiring/remote control
continues 24 hour operation, an additional insulation (thickness 10mm or more of glasswool or polyethylene form) is required. wiring connection
4
Though the installation is acceptable up to maximum of 910mm square ceiling opening, keep the clearance of 35mm or less 6 Air-outlet
between the indoor unit and the ceiling opening so that 7 Suction grille
the panel overlap allowance can be ensured.
5 8 Corner decoration cover
Please do not place the thing been damp and troubled under an indoor unit.
When the case where humidity is 80% or more, and the drain outlet are choked up and the air filter are dirty, dew may fall. 9 Drain hose (accessory)
23 24
DIMENSIONS (Unit: mm)
115 60
FHNQ13MV1V 920 960 18 17 16 142 58
40 135
36
FHNQ18MV1V 1120 1160 300 or more
102
160
185
210
65
FHNQ21MV1V 1120 1160 50 60 65 1300
192
85
10 or more
FHNQ24MV1V 1360 1400 1104 151
position)
3
(Hanging
FHNQ26MV1 1360 1400 Position slit hole for taking out in piping back
260
500
580
FHNQ42MV1 1550 1590 8
15
FHNQ48MV1 1550 1590 A
317
271
(Hanging position)
167
137
Hanging bolt Service space
1
55
4-M8~M10 5 11 80 Position : Hole of wall for taking out in piping back 8
(Required space)
1155 126
(View from the front)
40
(Suspension bolt pinch)
90
155
195
1300
680
151 1104
55 14
5
4 o/ 45 10 1088
30 or more B 30 or more 1084
From the floor side 2500 or more 155
16 1074
(Service space) (Service space) 1064
6×P150=900 2 102 6×P.150=900
55
50
(Required space)
4
300 or more
For height installation
13 The Front
6 Brand name plate
110
5
170
107
164
134
228
260
260
219
236
150
(Note.2) 1 Air discharge grille
Obstacle 2 Air suction grille
Floor side 3 Air filter
Drain pipe connection VP20
52
16
10
16-M4 Holes 700 29
(For left piping) 6 4 Gas pipe connection 1 6 7
(All Around)
5 Liquid pipe connection 18-M4 Holes
6 Drain pipe connection (All Around)
300
275
275
225 7 Earth terminal (Inside the electric components box)
8 Suspension bracket
9 Backward pipe and wiring connection opening lid
80 80 10 Upward pipe and wiring connection opening lid
3 2 7 5 105 4 11 Right side pipe connection
12 Left back drain pipe connection 1 Liquid pipe connection 5 Switch box
170
Notes: 13 Left side drain pipe connection 2 Gas pipe connection 6 Control wiring intake (for remote controller)
1
Location of unit's Name plate : Bottom of fan housing inside the suction grille. 3
2
14 Right side drain pipe connection Drain pipe connection 7 Control wiring intake (for outdoor unit)
In case of using wireless remote controller, this position will be a signal receiver. 15 Hole of wall for taking out in pipe back
Refer to the drawing of wireless remote controller in detail. 4 Ground terminal 8 Suspension bracket Note: 1Location of unit's Name Plate: Chamber cap
16 Upward drain pipe connection
3
The remote control code is the standard <about 3m outside the machine> attached. 17 Upward gas pipe connection
(0.5mm2x2 wicks O.D. 5.4)(It is not attached to VRV.) 18 Upward liquid pipe connection
DUCT CONNECTION LOW STATIC PRESSURE TYPE DUCT CONNECTION MIDDLE STATIC PRESSURE TYPE
[FDBNQ09/13/18MV1V] [FDMNQ26MV1]
3
10 or more
600
3
680
500
580
427
381
317
146
116
271
167
137
Service space
55
8
55
8 1203 126
755 126 Service space (Suspension bolt pinch)
(Suspension bolt pinch)
1350
151 1153
684 1134 8 1137
664 1114 16 1121
3×P150=450 2 51 7×P150=1050
4 7×P150=1050 2
50
50
5
110
170
107
152
5
164
228
134
260
219
236
150
260
212
123
175
206
274
280
263
305
305
150
52
127 3×P.150=450
16
10
74
16
10
(All Around) 16 674 18-M4 Holes 727 29
12-M4 Holes 1 6 7
10 688 (All Around)
(All Around) 20-M4 Holes
151 704 (All Around)
900
1 Liquid pipe connection 5 Switch box 1 Liquid pipe connection 5 Switch box
2 Gas pipe connection 6 Control wiring intake (for remote controller) 2 Gas pipe connection 6 Control wiring intake (for remote controller)
3 Drain pipe connection 7 Control wiring intake (for outdoor unit) 3 Drain pipe connection 7 Control wiring intake (for outdoor unit)
4 Ground terminal 8 Suspension bracket Note: 1Location of unit's Name Plate: Chamber cap 4 Ground terminal 8 Suspension bracket Note: 1Location of unit's Name Plate: Chamber cap
25 26
DIMENSIONS (Unit: mm)
DUCT CONNECTION LOW / MIDDLE STATIC PRESSURE TYPE OUTDOOR UNIT // RNQ18/21MV1(V)
[FDBNQ24MV1V]
[FDMNQ30/36/42/48MV1] Drain outlet
I.D. 18 hose for connection
845 78
1550 300
1353 151 300 or more 131 573.5
3
342
326
300
3
600
680
7
20
(M8 or M10)
427
381
Earth terminal
146
Name plate in switch box
116
Brand name label
Wiring inlet
Service space
55
8
1403 126
(Suspension bolt pinch)
595
1550
60
151 1353
1334 8 1337
105
1314 16 1321
7×P150=1050
51 7×P150=1050 144 20
2 Liquid stop valve
50
Service port
212
175
206
274
305
263
280
150
305
74
16
10
18-M4 Holes 827 29 6
1 7
Minimum space for air passage
Wall height on air outlet side
(All Around)
20-M4 Holes =less than 1000
150
(All Around)
300
50
100
1 Liquid pipe connection 5
300
Switch box
2 Gas pipe connection 6 Control wiring intake (for remote controller)
3 Drain pipe connection 7 Control wiring intake (for outdoor unit) 50 50
300
50
4 Ground terminal 8 Suspension bracket Note: 1Location of unit's Name Plate: Chamber cap
Drain outlet
I.D. 15.9 hose for connection
4-Hole for anchor bolts 825 78
Drain outlet (M8 or M10)
(I.D. 15.9 hose for connection) 325
574 105.5 124 580
490
2
13
36
29.5
311
350
330
300
25
10
Handle 4-Hole for anchor bolts
Brand name label (M8 or M10)
285 8 12 765 63 Earth terminal
Manufacture’s Liquid stop valve
Brand name label Name plate Wiring inlet in switch box
label ( 6.4CuT)
Wiring
inlet
550
Service
735
port
165
105
196 22
In case of removing
89 64
stop valve cover Gas stop valve
( 15.9CuT for RNQ13) 155 18
( 9.5CuT for RNQ09) Liquid stop valve 160 30
Minimum space for air passage
Wall height on air outlet side ( 9.5CuT)
=less than 1200 Gas stop valve
150
100
100
150
50
100
350
100
350
50 50
300
50
100
50 50
50
350
27 28
DIMENSIONS (Unit: mm)
30
bolt 4-M12
30
(345∼355)
(345~355)
320
350
320
350
55
61
37
48
38 41
30
30
91 96
140 620 140
160 620 160
30 900
30 940
4 2
3
7 1
2
7 6 3
1
990
6 5 7
5
6 7
1345
5
7
55
5 6 6
60
340
55
339
223
5 5
95
95
95
55
84
53
53
435
53
89
55
60
410
89 19 19 80 52
7 6
223
95
95
95
142 145 13 67
84
90 16 19 80 52
8 89 19
54
24
89
54
53
16
142 145 13 67
8
161
71 16
260
16
68
70 102 117
3 Service port 3 Service port (in the unit)
36
4 Grounding terminal 4 Grounding terminal
58
61
262 5 Refrigerant piping intake 5 Refrigerant piping intake
416
595
6 Power supply wiring intake 5 6 Power supply wiring intake
7 Control wiring intake 45 376 191 7 Control wiring intake
8 Drain pipe connection 8 Drain pipe connection
(345~355)
320
350
55
37
38
30
91
160 620 160
30 940
3
2
1
7
1430
6 7
5 6
5 5
423
422
60
55
95
95
95
84
54
89
54
53
89 19 19 80
142 145 13 67
8
71 16 1 Gas pipe connection
16
58
4 Grounding terminal
5 Refrigerant piping intake
5 6 Power supply wiring intake
20 7 Wiring between unit intake
9 36 201 154 179 8 Drain outlet
25 9 Drain port
29 30
DIMENSIONS (Unit: mm) Installation service space for outdoor unit (Unit: mm)
BRC7F633F BRC4C64
1 When there is an obstruction on the inlet side 2 When there is an obstruction on the outlet side
CEILING MOUNTED CASSETTE TYPE <Round Flow>
• Receiver installation procedure
Transmitting part Remote controller holder
installation procedure Receiver
• Receiver detail
1) When the overhead space is open 1) When the overhead space is open
<Installation to wall surface> Refrigerant
piping side
1. For single unit installation 1. For single unit installation
When there is an
157
Liquid crystal
remote controller
Drain piping
Decoration panel obstruction only ore
(Wireless) rm
side
on the inlet side 50
0o
Remote controller
re
holder
or
mo 2. For multiple units installation 10
0
mo or
CEILING SUSPENDED TYPE 10
0
(more than two units) re 10
0
62 17.5 mo or
Receiver installation procedure Receiver detail re
The Front Receiver
When there are obstructions
on both sides
BRC7NU66
Transmitting part
ore
Remote controller holder
100
installation procedure or m rm
<Installation to wall surface> ore 0 0o
ore 10
100 rm
or m 0o
Remote controller ore 10
2) When there is an obstruction
(Wireless)
ss
r le
Receiver detail 0o
2. For multiple units installation in the overhead space 50
115.5
1000 or more
Remote controller
2-5x9 Slot
Service space for ceiling
installation
(more than two units)
holder
10
0
mo or 1. For single unit installation
When there are re 10
0
(Srevice space)
mo or
More than 90
(Ceiling opening)
re
obstructions on
83.5
120
106
An obstruction
72
54 18.1
Note :
both sides 10
00 in the overhead space
Do not install more than 3 or
mo
receivers in the vicinity of one re
another. re
0.5 mo
or
With 4 or more units, there is
49
70 18 35 always the possibility of re 0
(Ceiling opening)
malfunction 20
0o r mo 50
rm 0o
Switch box
ore 30
(field Supplied parts) 2. For multiple units installation
ss
(more than two units) 0o
r le
50
1000 or more
10
0
Wired type Remote controller dimensions mo or
re
ess
1. For single unit installation l
1000 or more
0 or
42
50
re
120
mo
84
or
When there is an
117
00
38
0~5
10
17 Through hole
(fl12~fl16)
obstruction on the An obstruction
120 17
inlet side
( Distance between
18 Cord remote controller in the overhead
23 28 outlet 17 and control box )
CONTROL BOX
space e
46
hole or
rm
Note) 1. Remote controller cord and Specifications of cord
10
0o 3 When there are obstructions on both
staple are not attached.
they are field supplied
Type Vinyl cord with sheath or cable (Insulated thickness: 1 mm or more) the inlet and outlet sides
Size 0.75~1.25 mm2
parts.
When there are obstructions ss (When the obstruction on the outlet side is higher than the
1000 or more
Total length 500 m
r le
0o unit itself)
on the inlet side and
* Countries requiring EMC: Shield wire (insulated thickness: 1 mm or more) 50
Operation
lamp or m
120
ore
84
e
(Green) 150 or
rm
1. For single unit installation
40
or m o
84
84
ore 1 50
40
H
Code outlet hole
120 19 28
L
5X15 oblong hole 48.5 Note)2 28 46
5X7 oblong hole 23 48.5 Through hole 0~5
Left outlet ( 8- 10) Switch box for one switch Switch box for two switch (Between remote
46 19 Lower case portion ex.) KJB111A ex.) KJB211A 0
2. For multiple units installation (more than two units)
controller and
(optional accessory) (optional accessory) control box) 10 ore
Lower case portion Switch box
[field supplied part] L H 0 or
m
50 ore
Note) m
1. Remote controller cord and staple are not attached. They are field 2.If the hole size is too large or the location When there are obstructions or
1000 or more
10 ss 10
Type Vinyl cord with sheath or cable (insulated thickness: 1mm or more) 0 r le 0
mo or 0o (more than two units) mo or
Size 0.75~1.25 mm2 re 50 re 10
0
mo or
Total length 500 m An obstruction re
BRC1NU61 in the overhead 10
44.5 space 10 0o
H
00 rm
or ore
Note) mo
25 The dimension of hole. re
6
20
A
a 0
re 30 ore
L H
B
mo
10
B
22 25
17 R2 20 m
or or
119
0o 0 00
13
rm 30
4
10 ore
B
25 20 ore
77
A
m
A
A
or
Hole type a (mm)
41 38 A 6
111 24 B 10
41.5
Note : As for other patterns of installation, please refer to Installation manual or Engineering Data Book.
31 32
MEMO
33 34