You are on page 1of 5
eee eS et Calibration Certificate of Calibration Laboratory gig] vertiticate of Calibration Laboratory GRY Certificate Number: 20190509-64254 #207301 (EceEB Manufacturer: IET Labs, Inc. ‘Submitted By: Tan Delta Electric Corporation Model: PRS-370 Tandelco Bidg., 34A J.P. Rizal St. Description: Programmable Resistance Substituter Project 4 Serial Number: A2-19191112 Quezon City 1109, Phillipines. Customer Designation: irae Ds 5703 Condition Received ¥i New unit C1 Met manufacturer's specifications 1 Out of tolerance (1 Inoperative (Physical Damage (see Details of Damage) Condition Returned i Calibrated/Certified to manufacturer's specifications CO Repaired © Other (see Condition Returned Notes) Test Procedure The instrument listed above was calibrated by IET Labs, according to Calibration Procedure PRS-TP, Rev A. Customer Requirements Three yoar calibration interval has been specified by the customer. Decision Rules "05 (Root Difference Square) rule: PASS if NEASURED value <+ Test Limit < (Specification Limit*2 - Measurement Uncertainty*2} "0.5 ‘This gives a PFA (Probability of False Accept) of < 0.6% A PASS* indicates the MEASURED value is 2Test Limits and =LOWER LIM. otherwise FALL, 1: Percent exror between the NOMINAL and = INEASURED-WOtENAL) /NOMENAL] 100 Absolute error between the NOMINAL and MEASURED ~(NEASURED- NOMINAL} Tf ZERO SUBTRACTION is specified in Schedule, AND

You might also like