Professional Documents
Culture Documents
Mod. F-CC/EV: Fuel Cell
Mod. F-CC/EV: Fuel Cell
Mod. F-CC/EV
DESCRIPTION
This kit applies hydrogen solar technology and enables to carry
out a range of assisted tests concerning renewable energies.
Using voltage and current sensors will enable to check these
EN
TRAINING PROGRAM
• Determining current-voltage characteristic, power curve and
efficiency of solar module
• Determining the efficiency of solar module
• Determining the current-voltage characteristic of PEM
electrolyser
• Energy efficiency and Faraday efficiency of PEM electrolyser
• Determining current-voltage characteristic and power curve
of PEM fuel cell
• Energy efficiency and Faraday efficiency of PEM fuel cell
• Tests with methyl alcohol fuel cell
• Current-voltage characteristic of methyl alcohol fuel cell
TECHNICAL SPECIFICATIONS:
• Module of solar cells ( 2 V - 350 mA ) for powering the
electrolyser
• Electrolyser of 1,16 W for producing and collecting gases by
direct electrolysis of water
• Two separated tanks of 30 cm3 for H2 and O2
• Production: H2: 5 cm3/min; O2: 2,5 cm3/min
• Junior fuel cell H2/O2 (500 mW)
• Junior fan (10 mW): electric load for dissipating the energy SUPPLIED WITH
output by PEM cell THEORETICAL - EXPERIMENTAL
• 1 resistance module HANDBOOK
• 2 multimeters
• 1 chronometer OPTIONAL
• Leads • EVLAB DATALOGGER mod. EVS-EXP/EV
including SOFTWARE EVLAB WORKSPACE
mod. SW-F-CC/EV for a total control
of interactive experiments
45A-E-EN-FCC-7
EN 12 ELETTRONICA VENETA S.P.A. - 31045 Motta di Livenza (TV) Italy - Via Postumia 16 - Tel. +39 0422 765 802 - Fax +39 0422 861 901 - E-mail: export@elettronicaveneta.com