Professional Documents
Culture Documents
THEORY:
A non-inverting amplifier is an op-amp circuit configuration which produces an amplified output signal.
The non-inverting voltage amplifier is based on series-parallel negative feedback. As the ideal voltage-
controlled voltage source, this amplifier exhibits high input impedance, low output impedance, and
stable voltage gain. The voltage gain is set by the two feedback resistors, R i and Rf.
EQUIPMENT:
(1) Dual DC Power Supply
(2) DMM
(3) Resistors
(4) Oscilloscope
CIRCUIT:
PROCEDURE:
1. The voltage gain of the non-inverting amplifier can be determined accurately from the feedback
resistors Ri and Rf. Calculate the voltage gains for the amplifier of Figure 1 for the R f values specified,
and record them in Table 1.
4. Apply the generator to the amplifier. Measure and record the output voltage in Table 1. Also,
compute the resulting experimental voltage gain and gain deviation.
DATA TABLE:
Here, Vin = 0.1V & Ri=1kΩ
44 45 4.6V 46 2.22%
Table-1
Questions:
1) What is the effect as Rf is increased?
3) Does the non-inverting voltage amplifier exhibit a predictable and stable voltage gain?
Ans: Yes, the non-inverting voltage amplifier exhibit a predictable and stable voltage gain.
4) What can be said about the input impedance of this type of amplifier?
For a non-inverting amplifier circuit, the input impedance is given by the equation,
β = feedback factor
INVERTING OP-AMP
OBJECTIVE:
In this exercise, the performance of the inverting voltage amplifier will be examined.
THEORY:
The inverting voltage amplifier is based on parallel-parallel negative feedback. This amplifier exhibits
modest input impedance, low output impedance, and stable inverting voltage gain. The voltage gain is
set by the two feedback resistors, Ri and Rf.
EQUIPMENT:
(1) Dual DC Power Supply
(2) DMM
(3) Resistors
(4) Oscilloscope
CIRCUIT:
Figure-2
PROCEDURE:
1. The voltage gain of the inverting amplifier can be determined accurately from the feedback resistors
Ri and Rf. Calculate the voltage gains for the amplifier of Figure 1 for the R f values specified, and
record them in Table 2.
4. Apply the generator to the amplifier. Measure and record the output voltage in Table 2. Also,
compute the resulting experimental voltage gain and gain deviation.
DATA TABLE:
Here, Vin = 0.1V & Ri=1kΩ
Table-2
Questions:
1) What is the effect as Rf is increased?
3) Does the inverting voltage amplifier exhibit a predictable and stable voltage gain?
Ans: Yes, the inverting voltage amplifier exhibit a stable inverting voltage gain.
4) What can be said about the input impedance of this type of amplifier?