Forged Milled Compressor Wheels (FMW) are fully milled from forged aluminum, giving them strength that exceeds typical bar-stock aluminum and cast aluminum. They range in size from 58mm to 80mm in tip diameter. Gamma-Ti turbine wheels can cut turbine inertia by around 50% for improved turbo response. Turbine sizes are available from 58mm to 80mm in diameter. EFR turbos use a dual-row ball bearing cartridge with ceramic balls and metal cage to reduce friction and improve turbo response at low speeds. They provide flexibility in compressor cover and wastegate bracket mounting.
Forged Milled Compressor Wheels (FMW) are fully milled from forged aluminum, giving them strength that exceeds typical bar-stock aluminum and cast aluminum. They range in size from 58mm to 80mm in tip diameter. Gamma-Ti turbine wheels can cut turbine inertia by around 50% for improved turbo response. Turbine sizes are available from 58mm to 80mm in diameter. EFR turbos use a dual-row ball bearing cartridge with ceramic balls and metal cage to reduce friction and improve turbo response at low speeds. They provide flexibility in compressor cover and wastegate bracket mounting.
Forged Milled Compressor Wheels (FMW) are fully milled from forged aluminum, giving them strength that exceeds typical bar-stock aluminum and cast aluminum. They range in size from 58mm to 80mm in tip diameter. Gamma-Ti turbine wheels can cut turbine inertia by around 50% for improved turbo response. Turbine sizes are available from 58mm to 80mm in diameter. EFR turbos use a dual-row ball bearing cartridge with ceramic balls and metal cage to reduce friction and improve turbo response at low speeds. They provide flexibility in compressor cover and wastegate bracket mounting.
m1lled from forged aluminum, commonly Gamma Ti turbine Wheel & Shaft known as 'billet'. Cut from custom Gamma-Ti turbine wheel cuts forgings,their strength exceeds that turbine inertia by roughly 50% which is available from typical bar-stock dramatically improving turbo and also exceeds the material properties Stainless steel response. Turbine sizes range turbine housings Sensor Mounting of an aluminum casting. from 58 to 80mm in tip Convenience Stainless steel turbine diameter. housings improve durability Speed sensor mounting in high-temperature provisions are applications and offer aslo supplied on superior corrosion resistance every as well as being cast with compressor thin walls to reduce weight cover. Speed and thermal inertia. All EFR sensors are sole turbine housings are offered separately________ __:� with industry standard connection flanges, select configurations available with V-band inlet and outelets for improved mounting freedom.
High Flow Wastegates
Purpose designed !arge wastegate ports give the wastegated EFR turbos Boost Control the capability of Solenoid Valve (BCSV) handling the flow A boost control solenoid requirements of high valve (BSCV) is performance included with every applications. EFR turbo. ------
High Turbine Efficiency
The EFR turbine wheels have the characteristic of very high Enhanced Turbo Response efficiencies and have been EFR turbochargersuse a paired with our 'Superback' dual-row ball bearing and 'Fullback' back-disk cartridge with ceramic balls shapes. The Superback Flexible Compressor Cover shape adds a curved profile The 'large' cover has a dual and meta! cage. This bearing Simplified Installation system provides substantial to the backdisk and has the machined outlet, both for a effect of lowering centrifugal lntegrated compressor hose connection and a v friction reductionat low turbo recirculation valve (CVR) to speeds and in the process rotational speeds. band connection Select sizes available with help avoid compressor surge helps improve turbo response. and backflow during a Mixed Flow Turbine (MFT) throttle lift event. This geometry to further enhance feature helps to simplify durability, lower inertia, and the installation task and lowers improve exhaust pulse respnse. overall system install cost. Adjustable Wastegate The fabrication and Ease of Orientation installation task is Turbo orientation flexibility simplified with is facilitated by the wastegated EFR models wastegate bracket to that feature adjustable bearing housing mounting wastegates available in arrangement, allowing several canister spring freedom to locate the options, which provide end housings independent base pressure settings of the wastegate canister. ranging from 6-45 psi.