The document contains a 15 question true/false quiz about basic technology topics for junior secondary school students, including questions about tools, energy, fuels, and engineering drawings. It then provides 3 short answer questions asking students to define key terms like energy, power, work, and fuels or list different types of energy sources. The quiz and questions cover fundamental concepts that form the basis of instruction in basic technology for the junior secondary level.
The document contains a 15 question true/false quiz about basic technology topics for junior secondary school students, including questions about tools, energy, fuels, and engineering drawings. It then provides 3 short answer questions asking students to define key terms like energy, power, work, and fuels or list different types of energy sources. The quiz and questions cover fundamental concepts that form the basis of instruction in basic technology for the junior secondary level.
The document contains a 15 question true/false quiz about basic technology topics for junior secondary school students, including questions about tools, energy, fuels, and engineering drawings. It then provides 3 short answer questions asking students to define key terms like energy, power, work, and fuels or list different types of energy sources. The quiz and questions cover fundamental concepts that form the basis of instruction in basic technology for the junior secondary level.
Subject: Basic Technology JSS 1A-D Objective Question 1-15 Choose A-D Options 30Marks 1. Which of the following is the procedure for setting paper and drawing instruments on......(a)Anvil Plate(b)Surface Plate(c)Drawing Board(d)Panel Board 2. .......Is the steps used in board practice. (a)Boarder Line (b)Horizontal line (c)Drawing Board (d)Vertical line 3. Which of these instruments are used in engineering drawings except (a)Compass (b)Tee Square (c)Vennier Calliper (d)Set Square 4. The following are lines used in engineering drawings except (a)Arrow Head(b)Thin Continuous line(c)Thick Continuous line(d)White lines 5. .....Is a place where all the drawing information are contained is known as (a)Boarder line(b)Tittle Block (c)Outlines (d)Dimension line 6. Which of the following information are contained on the title block except (a)Name (b)Date(c)Scale (d)Construction Design 7. ....... are used in measuring size,length or thickness of a drawing or an objects is known as (a)Scale Drawing (b)Enlarged Scale (c)Reduce Scale (d)Concentric Scale 8. Which of the following are woodwork hand tools except (a)Measuring Tape(b)Cutting Tools (c)Drawing Tools (d)Welding Machine 9. Which of the following are not example of driving tools (a)Hammer (b)Screw- driver(c)Chisel (d)All of the Above 10. The following are example of Cutting tools except (a)Saw(b)Hack plane(c)Hack Saw(d)Measuring Tape 11. The ability or capacity to do work is known as (a)Energy (b)Work (c)Force(d)Power 12. The following are forms of energy (a)Heat Energy (b)Light Energy (c)Chemical Energy (d)All of the Above 13. ...... Is any material which can burn to produce heat is known as(a)Fuel (b)Fire(c)Hot water(d)Temperature 14. When an energy is converted from one form to another is known as (a)Source of Energy (b)Potential Energy (c)Kinetic Energy (d)Natural Energy 15. Which of these are common types of fuels (a)Wood (b)Charcoal (c)Coal(d)All of the Above
Easy Question JSS 1A-D
Answer any Two Question from Part 30Marks. Question One 15Marks a) List any five 5 forms of energy b) List any five 5 major types of common fuels c) What is fuel? Question Two 15Marks Define the following term a) (I). Energy(ii)Power (iii)Work (iv)Force b) List other natural sources of energy Question three 15Marks Define the following a) (I)Potential energy (ii)Kinetic energy b) Define the following c) (I)Solar energy (ii)Wind energy (ii)Heat energy