Professional Documents
Culture Documents
DIVISION PED
DEPARTEMENT
POLE HASSI MESSAOUD
RESUME DE LA FORMATION
SUMMARY OF THE TENTH TRAINING:
DRILLSTEM TESTING
REALISED BY :
AOUANOUK Amine
august 2021
Contents
Contents :
I.-Definition of DST…………………………………………………………………
2
II.-Subsurface Test Equipment…………………… ………………………………2
III.-Surface DST
equipment………………………………………………………….2
IV.-Information obtained from
DST………………………………………………..3
Page 1
In this training we learned:
I. Definition of DST:
Drillstem testing is a temporary well completion test undertaken before or after
casing is run. It enables us to look "deeper" into the reservoir than the other wellbore
measurement methods. In its simplest form, the DST assembly is a set of
measurement, control, and sample tools placed on the drillstem (in limited cases, at
the bottom of tubing). It consists of one or more packers which isolate the test zone, a
flow control valve, a continuous pressure recording device, a fluid sample chamber,
and a perforated anchor for the fluids entering the tool string. The test tools are run
into the hole with empty drillpipe or tubing (in some cases a carefully designed water,
diesel, or nitrogen cushion is used).
Page 2
III. Surface DST equipment:
Surface equipment provides for the safe control, sampling, flow rate measurement,
and disposal of fluids that reach the surface during a drillstem test, typical surface
equipment installation.
Control head
Street flow hose
Floor manifold
Flare line
Page 3
Separator/treater
Page 4