Professional Documents
Culture Documents
REAGENTS
MANUAL METHODS
SEPPIM S.A.S.
ZONE INDUSTRIELLE
61500 SEES - FRANCE
: 02 33 81 21 00 : 02 33 28 77 51
REAGENTS
G Version
GAMMA GT SL........................................... MM-GASL-1
A Version GAMMA GT ............................................... MM-GAGT-1
ACID PHOSPHATASE .................................MM-PACI-1 GLUCOSE HK SL........................................ MM-GHSL-1
ALBUMIN .................................................. MM-ALBU-1 GLUCOSE PAP SL ...................................... MM-GPSL-2
GLUCOSE PAP............................................ MM-GLUP-1
ALP (DEA) SL.............................................. MM-PASL-1
ALP (DEA) ...................................................MM-PALC-1
ALT/GPT 4+1 SL .................................... MM-ALSL4/1-1 I
ALT/GPT ..................................................... MM-ALAT-2
IRON CHROMAZUROL ............................. MM-FECA-1
AMYLASE SL ............................................. MM-AMSL-3 IRON FERROZINE® ................................... MM-FEFR-2
AST/GOT 4+1 SL .................................... MM-ASSL4/1-1
AST/GOT ..................................................... MM-ASAT-2
L
LACTATE .................................................... MM-LACT-2
B New LDH-L SL......................................................MM-LLSL-1
BILIRUBIN TOTAL & DIRECT 4+1 .......... MM-BITD-2 LDH-P .......................................................... MM-LDHP-2
M
C MAGNESIUM CALMAGITE ................... MM-MAGN-1
CALCIUM ARSENAZO ............................. MM-CALA-1 MICROPROTEIN ........................................ MM-PRTP-2
CALCIUM OCPC ........................................ MM-CALO-1
Update CHLORIDE ................................................. MM-CHLO-2
CHOLESTEROL SL .....................................MM-CHSL-2 P
Update CHOLESTEROL ......................................... MM-CHOL-3 PHOSPHORUS ............................................ MM-PHOS-1
CHOLESTEROL HDL SL 2G .................... MM-HDLL-1
CHOLESTEROL LDL SL 2G ......................MM-LDLL-1
HDL CHOLESTEROL ................................ MM-HDLC-2
CHOLINESTERASE ....................................MM-CHES-2 T
TOTAL PROTEIN PLUS ............................. MM-PROB-1
CK MB SL ................................................... MM-CMSL-2
CK MB ........................................................ MM-CKMB-2 TRIGLYCERIDES MONO SL NEW ...... MM-TGMLN-2
TRIGLYCERIDES ........................................ MM-TRIG-2
CK NAC SL ..................................................MM-CKSL-2
CK NAC.......................................................MM-CKNA-2
COPPER........................................................ MM-CUIV-1 U
CREATININE JAFFE.................................. MM-CRCO-1 UREA UV SL ............................................... MM-URSL-2
CREATININE PAP SL ................................. MM-CRSL-3 UREA UV.................................................... MM-URUV-1
URIC ACID ................................................. MM-ACUR-2
URIC ACID MONO SL ..............................MM-AUML-2
Update URIC ACID SL ............................................ MM-AUSL-2
SEPPIM S.A.S.
ZONE INDUSTRIELLE
61500 SEES - FRANCE
: 02 33 81 21 00 : 02 33 28 77 51
ELITECH ELITECH ELITECH
PHOSPHATASE
MANUAL METHOD
PROCEDURE
Wavelength : 405 nm
Temperature : 37°C
Cuvette : 1 cm light path
Mix and after a 5 minute incubation measure the change of optical density per minute (∆OD/min.) during 3
minutes.
CALCULATION
LINEARITY
If ∆OD/min. exceeds 0.070 at 405 nm, repeat test using serum diluted 1/10 with sodium chloride solution (9 g/L).
Multiply result by 10.
(07/2005)
MM-PACI-1
MANUAL METHOD
PROCEDURE
Wavelength : 628 nm
Temperature : 37°C
Cuvette : 1 cm light path
CALCULATION
OD Sample
xn
OD Standard
n = standard concentration
(07/2005)
MM-ALBU-1
MANUAL METHOD
PROCEDURE
One-reagent procedure
Working reagent : 1 mL
Sample : 20 µL
Mix and after a 1 minute incubation, measure the change of optical density per minute (∆OD/min.) during 3
minutes.
• Two-reagent procedure
R1 : 1 mL
Sample : 20 µL
Mix, wait 1 minute and add:
R2 : 250 µL
Mix and after a 1 minute incubation, measure the change of optical density per minute (∆OD/min.) during 3
minutes.
CALCULATION
One reagent procedure Two reagents procedure
At 405 nm: Activity (U/L) = ∆OD/min. x 2 750 3424
At 410 nm: Activity (U/L) = ∆OD/min. x 2 910 3623
LINEARITY
If ∆OD/min. exceeds 0.250 at 405 nm, repeat the test using serum diluted 1/10 with sodium chloride solution
(9 g/L). Multiply result by 10.
(07/2005)
MM-PASL-1
MANUAL METHOD
PROCEDURE
Working reagent : 1 mL
Sample : 20 µL
Mix and after a 1 minute incubation, measure the change of optical density per minute (∆OD/min.) during 3
minutes.
CALCULATION
LINEARITY
If ∆OD/min. exceeds 0.250 at 405 nm, repeat the test using serum diluted 1/10 with sodium chloride solution (9
g/L). Multiply result by 10.
(07/2005)
MM-PALC-1
MANUAL METHOD
PROCEDURE
Wavelength : 340 nm
Temperature : 37°C
Cuvette : 1 cm light path
Read against distilled water.
• One-reagent procedure
Working reagent : 1 mL
Sample : 100 µL
Mix and after a 1 minute incubation, measure the change of optical density per minute
(∆OD/min.) during 3 minutes.
• Two-reagent procedure
R1 : 1 mL
Sample : 125 µL
Mix, wait 1 minute and add:
R2 : 250 µL
Mix and after a 1 minute incubation, measure the change of optical density per minute
(∆OD/min.) during 3 minutes.
CALCULATION
For the two procedures, at 340 nm: Activity (U/L) = ∆OD/min. x 1 746
LINEARITY
If ∆OD/min. exceeds 0.150 at 340 nm, repeat test using serum diluted 1/10 with sodium chloride solution (9 g/L).
Multiply result by 10.
(07/2005)
MM-ALSL4/1-1
MANUAL METHOD
PROCEDURE
Working reagent : 1 mL
Sample : 100 µL
Mix and after a 1 minute incubation, measure the change of optical density per minute (∆OD/min.) during 3
minutes.
CALCULATION
LINEARITY
If ∆OD/min. exceeds 0.150 at 340 nm, repeat test using serum diluted 1/10 with sodium chloride solution (9 g/L).
Multiply result by 10.
(03/2008)
MM-ALAT-2
MANUAL METHOD
PROCEDURE
Wavelength : 405 nm
Temperature : 30°C, 37°C
Cuvette : 1 cm light path
37 °C 30 °C
Reagent 1 mL 1 mL
Sample 15 µL 25 µL
Mix and after a 1 minute incubation, measure the change of optical density per minute (∆OD/min.) during 3
minutes.
CALCULATION
37 °C 30 °C
At 405 nm: Activity (U/L) = ∆OD/min. x 4640 2812
Take dilution factor into account for the calculation of the activity in urine.
LINEARITY
Up to 900 U/L
If ∆OD/min. exceeds 0.190 at 405 nm, repeat test using sample diluted 1/10 with sodium chloride solution
(9 g/L). Multiply result by 10.
(11/2006)
MM-AMSL-3
MANUAL METHOD
PROCEDURE
Wavelength : 340 nm
Temperature : 37°C
Cuvette : 1 cm light path
Read against distilled water.
• One-reagent procedure
Working reagent : 1 mL
Sample : 100 µL
Mix and after a 1 minute incubation, measure the change of optical density per minute
(∆OD/min.) during 3 minutes.
• Two-reagent procedure
R1 : 1 mL
Sample : 125 µL
Mix, wait 1 minute and add:
R2 : 250 µL
Mix and after a 1 minute incubation, measure the change of optical density per minute
(∆OD/min.) during 3 minutes.
CALCULATION
For the two procedures, at 340 nm: Activity (U/L) = ∆OD/min. x 1 746
LINEARITY
If ∆OD/min. exceeds 0.150 at 340 nm, repeat test using serum diluted 1/10 with sodium chloride solution (9 g/L).
Multiply result by 10.
(07/2005)
MM-ASSL4/1-1
MANUAL METHOD
PROCEDURE
Working reagent : 1 mL
Sample : 100 µL
Mix and after a 1 minute incubation, measure the change of optical density per minute (∆OD/min.) during 3
minutes.
CALCULATION
LINEARITY
If ∆OD/min. exceeds 0.150 at 340 nm, repeat test using serum diluted 1/10 with sodium chloride solution (9 g/L).
Multiply result by 10.
(07/2008)
MM-ASAT-2
MANUAL METHOD
ARSENAZO
MANUAL METHOD
PROCEDURE
CALCULATION
OD Sample
xn
OD Standard
n = standard concentration
Take dilution factor into account for the calculation of the concentration in urine.
(07/2005)
MM-CALA-1
MANUAL METHOD
PROCEDURE
Wavelength : 570 nm
Temperature : 37°C
Cuvette : 1 cm light path
CALCULATION
OD Sample
xn
OD Standard
n = standard concentration
Take dilution factor into account for the calculation of the concentration in urine.
(07/2005)
MM-CALO-1
MANUAL METHOD
PROCEDURE
Wavelength : 480 nm
Temperature : 25°C, 30°C, 37°C
Cuvette : 1 cm light path
Information for urine sample: The urine sample must be diluted ½ with distilled water before analysis.
CALCULATION
Serum/Plasma: Urine:
OD Sample OD Sample
n n2
OD Standard OD Standard
n= Standard concentration
(09/2009)
MM-CHLO-2
MANUAL METHOD
PROCEDURE
CALCULATION
OD Sample x n
OD Standard
n= Standard concentration
(07/2007)
* these kits contain a standard MM-CHSL-2
MANUAL METHOD
PROCEDURE
CALCULATION
OD Sample x n
OD Standard
n= Standard concentration
(03/2010)
MM-CHOL-3
HDL SL 2G
MANUAL METHOD
PROCEDURE
Wavelength : 600 nm
Temperature : 37°C
Cuvette : 1 cm light path
Then add:
R2 300 µL 300 µL 300 µL
CALCULATION
( A2 − A1 × Fdil ) Sample
×n n = Calibrator concentration
( A2 − A1 × Fdil )Calibrator
Fdil = Dilution factor = (R1 volume + sample volume)/(R1 volume+R2 volume + sample volume)
(04/2009)
MM-HDLL-1
LDL SL 2G
MANUAL METHOD
PROCEDURE
Wavelength : 550 nm
Temperature : 37°C
Cuvette : 1 cm light path
Then add:
R2 300 µL 300 µL 300 µL
CALCULATION
( A2 − A1 × Fdil ) Sample
×n n = Calibrator concentration
( A2 − A1 × Fdil )Calibrator
Fdil = Dilution factor = (R1 volume + sample volume)/(R1 volume+R2 volume + sample volume)
(04/2009)
MM-LDLL-1
CHOLESTEROL
MANUAL METHOD
PROCEDURE
1) Sample preparation:
Add to 500 µL of sample, 50 µL of precipitating reagent. Mix, wait for 10 minutes and centrifuge at 5000 rpm
for 15 minutes. The supernatant is collected for HDL determination.
2) HDL determination:
CALCULATION
OD Sample x n x 1.1
OD Standard
n = Standard concentration
1.1 = Sample dilution factor
(09/2009)
MM-HDLC-2
MANUAL METHOD
PROCEDURE
Working reagent 1 : 3 mL
Sample : 20 µL
Working reagent 2 : 100 µL
Mix and measure the change of optical density every 30 seconds (∆OD/30 s.) during 90 seconds.
CALCULATION
LINEARITY
If ∆OD/30 sec. exceeds 0.200 at 405 nm, repeat test using serum diluted 1/5 with sodium chloride solution
(9 g/L). Multiply result by 10.
(03/2008)
MM-CHES-2
MANUAL METHOD
PROCEDURE
Wavelength : 340 nm
Temperature : 30°C, 37°C
Cuvette : 1 cm light path
• One-reagent procedure
Working reagent : 1 mL
Sample : 40 µL
Mix and after a 3 minute incubation, measure the change of optical density per minute (∆OD/min.) during 3
minutes.
)• Two-reagent procedure
R1 : 1 mL
R2 : 250 µL
Mix and wait 30 seconds
Sample : 50 µL
Mix and after a 5 minute incubation, measure the change of optical density per minute (∆OD/min.) during 3
minutes.
CALCULATION
For the two procedures, at 340 nm: Activity (U/L) = ∆OD/min. x 8254
LINEARITY
(11/2008)
): Modification from the previous version MM-CMSL-2
MANUAL METHOD
PROCEDURE
Wavelength : 340 nm
Temperature : 30°C, 37°C
Cuvette : 1 cm light path
Working reagent : 1 mL
Sample : 50 µL
Mix and after a 5 minute incubation, measure the change of optical density per minute (∆OD/min.) during 3
minutes.
CALCULATION
a) Total CK activity :
Determine total CK activity in serum using the CK-NAC reagent.
b) CK-B activity :
CK-B (U/L) = ∆OD/min x 3 333
c) CK-MB activity :
CK-MB (U/L) = CK-B (U/L) x 2
LINEARITY
(05/2006)
MM-CKMB-2
MANUAL METHOD
PROCEDURE
Wavelength : 340 nm
Temperature : 30°C, 37°C
Cuvette : 1 cm light path
One-reagent procedure
Working reagent : 1 mL
Sample : 40 µL
Mix and after a 2 minute incubation, measure the change of optical density per minute (∆OD/min.) during 3
minutes.
)• Two-reagent procedure
R1 : 1 mL
R2 : 250 µL
Mix and wait 30 seconds
Sample : 50 µL
Mix and after a 2 minute incubation, measure the change of optical density per minute (∆OD/min.) during 3
minutes.
CALCULATION
For the two procedures, at 340 nm: Activity (U/L) = ∆OD/min. x 4127
LINEARITY
If ∆OD/min. exceeds 0.250 at 340 nm, repeat test using serum diluted 1/10 with sodium chloride solution (9 g/L).
Multiply result by 10.
(11/2008)
): Modification from the previous version MM-CKSL-2
MANUAL METHOD
PROCEDURE
Working reagent : 1 mL
Sample : 20 µL
Mix and after a 2 minute incubation, measure the change of optical density per minute (∆OD/min.) during 3
minutes.
CALCULATION
LINEARITY
If ∆OD/min. exceeds 0.150 at 340 nm, repeat test using serum diluted 1/10 with sodium chloride solution (9 g/L).
Multiply result by 10.
(03/2008)
MM-CKNA-2
MANUAL METHOD
PROCEDURE
One-reagent procedure
• Two-reagent procedure
Mix and read the optical density (OD2) after a 5 minute incubation.
The final colour is stable for at least 1 hour.
CALCULATION
n = standard concentration
(07/2005)
MM-CUIV-1
JAFFE
MANUAL METHOD
PROCEDURE
Working reagent : 1 mL
Sample : 100 µL
Mix and read the optical density (OD1) 10 seconds after the sample or standard addition. Exactly 2 minutes
after the first reading, take second reading (OD2).
CALCULATION
∆OD Sample xn
∆OD Standard
(07/2005)
MM-CRCO-1
PAP SL
MANUAL METHOD
PROCEDURE
Wavelength : 550 nm
Temperature : 37°C
Cuvette : 1 cm light path
Mix and read the change of optical density (∆OD) between 1 and 4 minutes..
CALCULATION
∆OD Sample
xn
∆OD Standard
n = standard concentration
Take dilution factor into account for the calculation of the concentration in urine.
(03/2008)
MM-CRSL-3
MANUAL METHOD
PROCEDURE
Wavelength : 405 nm
Temperature : 30°C, 37°C
Cuvette : 1 cm light path
• One-reagent procedure
Working reagent : 1 mL
Sample : 100 µL
Mix and after a 1 minute incubation, measure the change of optical density per minute
(∆OD/min.) during 3 minutes.
• Two-reagent procedure
R1 : 1 mL
Sample : 100 µL
Mix, wait 1 minute and add:
R2 : 250 µL
Mix and after a 1 minute incubation, measure the change of optical density per minute
(∆OD/min.) during 3 minutes.
CALCULATION
One reagent procedure Two reagents procedure
At 405 nm: Activity (U/L) = ∆OD/min. x 1 158 1421
LINEARITY
If ∆OD/min. exceeds 0.200 at 405 nm, repeat test using serum diluted 1/10 with sodium chloride solution (9 g/L).
Multiply result by 10.
(07/2005)
MM-GASL-1
MANUAL METHOD
PROCEDURE
Wavelength : 405 nm
Temperature : 30°C, 37°C
Cuvette : 1 cm light path
Working reagent : 1 mL
Sample : 100 µL
Mix and after a 1 minute incubation, measure the change of optical density per minute (∆OD/min.) during 3
minutes.
CALCULATION
LINEARITY
If ∆OD/min. exceeds 0.200 at 405 nm, repeat test using serum diluted 1/10 with sodium chloride solution (9 g/L).
Multiply result by 10.
(07/2005)
MM-GAGT-1
MANUAL METHOD
PROCEDURE
• One-reagent procedure
• Two-reagents procedure
Mix and read the optical density (OD) after a 5 minute incubation.
CALCULATION
OD Sample x n
OD Standard
n= Standard concentration
(07/2005)
MM-GHSL-1
MANUAL METHOD
PROCEDURE
CALCULATION
OD Sample x n
OD Standard
n= Standard concentration
(07/2007)
* these kits contain a standard MM-GPSL-2
MANUAL METHOD
PROCEDURE
CALCULATION
OD Sample x n
OD Standard
n= Standard concentration
(07/2005)
MM-GLUP-1
CHROMAZUROL
MANUAL METHOD
PROCEDURE
Wavelength : 637 nm
Temperature : 37°C
Cuvette : 1 cm light path
CALCULATION
OD Sample x n
OD Standard
n= Standard concentration
(07/2005)
MM-FECA-1
MANUAL METHOD
PROCEDURE
Then add:
R2 50 µL 50 µL 50 µL
Mix and read the optical density (OD) within one hour.
- OD3 OD4
CALCULATION
OD4 - OD2
xn
OD3 - OD1
n = standard concentration
(09/2009)
MM-FEFR-2
MANUAL METHOD
PROCEDURE
CALCULATION
OD Sample x n
OD Standard
n= Standard concentration
(05/2006)
MM-LACT-2
MANUAL METHOD
PROCEDURE
Wavelength : 340 nm
Temperature : 37°C
Cuvette : 1 cm light path
Read against reagent blank.
• Two-reagent procedure
BLANK SAMPLE
R1 1 mL 1 mL
Distilled Water 35 µL
Sample 35 µL
R2 250 µL 250 µL
Mix and after a 100 second incubation, measure the change of optical density per minute
(∆OD/min.) during 3 minutes.
CALCULATION
(10/2007)
MM-LLSL-1
MANUAL METHOD
PROCEDURE
Working reagent : 1 mL
Sample : 20 µL
Mix and after a 1 minute incubation, measure the change of optical density per minute (∆OD/min.) during 3
minutes.
CALCULATION
LINEARITY
If ∆OD/min. exceeds 0.150 at 340 nm, repeat test using serum diluted 1/5 or 1/10 with sodium chloride solution
(9 g/L). Multiply result by 5 or 10.
(03/2008)
MM-LDHP-2
CALMAGITE
MANUAL METHOD
PROCEDURE
CALCULATION
OD Sample x n
OD Standard
n= Standard concentration
Take dilution factor into account for the calculation of magnesium concentration in urine.
(07/2005)
MM-MAGN-1
MANUAL METHOD
PROCEDURE
Wavelength : 598 nm
Temperature : 37°C
Cuvette : 1 cm light path
CALCULATION
OD Sample x n
OD Standard
n= Standard concentration
(11/2008)
): Modification from the previous version MM-PRTP-2
MANUAL METHOD
PROCEDURE
Wavelength : 340 nm
Temperature : 37°C
Cuvette : 1 cm light path
CALCULATION
OD Sample x n
OD Standard
n= Standard concentration
Take dilution factor into account for the calculation of phosphorus concentration in urine.
(07/2005)
MM-PHOS-1
MANUAL METHOD
PROCEDURE
Wavelength : 546 nm
Temperature : 37°C
Cuvette : 1 cm light path
CALCULATION
OD Sample
n
OD Standard
n= Standard concentration
(08/2009)
MM-PROB-1
MANUAL METHOD
PROCEDURE
Wavelength : 500 nm
Temperature : 37°C
Cuvette : 1 cm light path
CALCULATION
OD Sample x n
OD Standard
n= Standard concentration
(07/2007)
* these kits contain a standard MM-TGMLN-2
MANUAL METHOD
PROCEDURE
CALCULATION
OD Sample x n
OD Standard
n= Standard concentration
(07/2007)
MM-TRIG-2
MANUAL METHOD
PROCEDURE
Wavelength : 340 nm
Temperature : 37°C
Cuvette : 1 cm light path
Read against distilled water.
• One-reagent procedure
Working reagent : 1 mL
Sample : 10 µL
Mix and read the variation of optical density (∆OD) between 30 seconds and 90 seconds.
• Two-reagent procedure
R1 : 1 mL
Sample : 10 µL
R2 : 250 µL
Mix and read the variation of optical density (∆OD) between 30 seconds and 90 seconds.
CALCULATION
∆OD Sample xn
∆OD Standard
n = standard concentration
(07/2007)
* these kits contain a standard MM-URSL-2
MANUAL METHOD
PROCEDURE
Wavelength : 340 nm
Temperature : 37°C, 30°C
Cuvette : 1 cm light path
CALCULATION
∆OD Sample x n
∆OD Standard
n= Standard concentration
Take the dilution factor into account for the calculation of urea concentration in urine.
(07/2005)
MM-URUV-1
MANUAL METHOD
PROCEDURE
Mix and read the optical density (OD) after a 5 minute incubation.
The final colour is stable for at least 15 minutes.
CALCULATION
OD Sample x n
OD Standard
n= Standard concentration
Take the dilution factor into account for the calculation of uric acid concentration in urine.
(09/2009)
MM-ACUR-2
MANUAL METHOD
PROCEDURE
Wavelength : 555 nm
Temperature : 37°C
Cuvette : 1 cm light path
Mix and read the optical density (OD) after a 5 minute incubation.
CALCULATION
OD Sample x n
OD Standard
n= Standard concentration
Take the dilution factor into account for the calculation of uric acid concentration in urine.
(07/2007)
* these kits contain a standard MM-AUML-2
MANUAL METHOD
PROCEDURE
Wavelength : 555 nm
Temperature : 37°C
Cuvette : 1 cm light path
• One-reagent procedure
• Two-reagent procedure
Mix and read the optical density (OD) after a 5 minute incubation.
CALCULATION
OD Sample x n
OD Standard
n= Standard concentration
Take the dilution factor into account for the calculation of uric acid concentration in urine.
(03/2010)
MM-AUSL-2