Professional Documents
Culture Documents
Quick Details
Usage: Universal Testing Machine
Power: Hydraulic
Brand Name: Liangong
Warranty: 12 months
weight: 2000kg
Model Number: WAW-1000B
Specifications
Equipment summary
the computer control electro-hydraulic servo universal testing machine is one versatile product, which
can meet the various tests specified in the international standard on the metal tensile test, and can also
according to other test standards to achieve tensile test, compression test bending test, shear test, and
other kinds of mechanical performance tests for different kinds of materials and products. during the test,
it can achieve closed-loop control such as constant-rate loading, constant-rate deformation, constant-
rate displacement, constant-rate strain, etc, and automatically obtain the tensile strength, yield strength,
specified non-proportional extension strength, elastic modulus and other properties of the measured
1
materials, and also be used to verify the performance of materials or products. The equipment has the
internationally leading design concept, simple operation, stable and reliable performance, and it can
maximize to meet the test needs of customers, which is the best choice for various types of metal, non-
metallic materials testing. It is suitable for metallurgy, construction, light industry, aviation, aerospace,
materials, colleges, scientific research units and other fields.
The equipment is driven by hydraulic power source, electro-hydraulic servo control technology, computer
data collection and processing, and it is the material testing machine which can realize closed-loop
control and automatic testing. after adding special test fixtures, the machine can also complete the test
of bolts, nuts and scaffolding components. In the compression space, there add related test
fixtures, such as bending test fixture, shear test fixture, splitting test fixture, elastic modulus instruments,
etc. Accessories, which can be used for the concrete and cement samples corresponding tests. In
addition to special fixtures such as steel balls, anchor chains, wire ropes, etc. Can complete the various
tests of the products.
Technical Parameters
2
Max. Tensile test space 680mm (including the piston stroke of oil cylinder)
Max. Compression test space 560mm (including the piston stroke of oil cylinder)
3
nonmetal tensile, compression, bending and shear test. Test operation and data
processing in accordance with GB/T 228-2010 "metallic materials tensile testing"
requirement, if change the structure and related parts replacement and can meet the
ASTM, ISO and other international standards requirements. The machine is suitable
for metallurgy, construction, light industry, aviation, space, materials, tertiary
institutions, scientific research units, etc.
3. Main Technical Parameters
3.1. Max. Test force: 300kN
3.2. Accuracy levels: 1 class
3.3. The column number: 4 columns
3.4. Measurement range of test force: 2%~100%FS (full scale)
3.5. Test force value relative error: ≤±1%
3.6. Test Force Resolution: 0.01kN
3.7. Deformation measurement range: 2% to 100% of Extensometer
3.8. Deformation Resolution: 0.001mm
3.9. Displacement value relative error: ≤±1%
3.10. Displacement resolution: 0.01mm
3.11. Clamping method: hydraulic clamping
3.12. Piston stroke: 200 mm
3.13. The piston movement maximum speed: 100 mm/min
3.14. Maximum tensile test space: 600mm(include piston stroke)
3.15. Distance between two columns : 500mm
3.16. Round specimen clamping range: φ4-φ32mm
3.17. Plate specimen clamping thickness: 0-15mm
3.18. Clamping width: 75mm
3.19. Maximum compression test space: 500mm(include piston stroke)
3.20. Pressure plate size: φ188mm
3.21. The host dimension: 800*600*1980mm
3.22. Power supply: 2.5kw, 380V,50Hz, 3-phase
4. Performance characteristics
4.1.Mechanical process structure:
The host part adopts cylinder down-setting type, chain transmission and hydraulic
clamping, stretching space located in the upper part of the host, compression, bend,
shear test space between middle beams and the workbench in the host; Oil source part
adopts hydraulic oil source.
4.1.1. The workbench and beams using cast steel materials, pillar and screw use Cr40
quenched and tempered, rigid;
4.1.2. The cylinder adopts a special process, honing processing, gap seal, sealing
strong, long service life;
4.1.3. High pressure oil pump, low noise, smooth operation;
4.1.4. Oil source hose used for containing rubber hose steel wire cables, security seal
does not leak;
4.1.5. Oil source using steel plate forming, surface plastic spraying processing, marble
4
mesa, computers and printers can be placed clean and save space.
4.2.Control and measurement system:
The control and measurement system absorbs all kinds of advanced experience of
current test machine control, and adopts full-digital electro-hydraulic servo closed-
loop control and measurement system to realize constant velocity stress, constant
velocity strain, constant velocity test force, constant velocity displacement and test
force maintain, displacement maintain control functions. The system has multiple
layers of protection functions, which can achieve various safety protections such as
overload, overcurrent, overvoltage, undervoltage, overspeed and limit of the testing
machine.
The system is equipped with a dedicated monitoring and control software, the test
data for statistical processing, automatic strike on the lower yield point, tensile
strength, tensile strength, elastic modulus and elongation of each point, σ0.2 etc data.
Computer real-time display of force, displacement, strain and other parameters during
the test, and the test curve dynamic display, and according to the different needs of the
force - time, force - displacement, displacement - time curve mode switch can also
output kinds of test curves and reports:
4.2.1, Hierarchical management of user rights, user login, open the appropriate action
under the authority of functional modules;
4.2.2, Using the most advanced multi-threading technology to collect data rate,
stability, and can automatically Immunity various sensor data processing, to avoid
accidental capture of failure of control failure defects;
4.2.3, Has a powerful report editing features, test reports, prepared in accordance with
the requirements and output the desired result, the data can also be used to save Word
format, easy to edit;
4.2.4, Database management, automatically save all test data and curves, and has a
curve to enlarge, compare and times read function for the laboratory network to
provide a quality foundation.
5. Configuration
No. Descriptions Quantity Remarks
1 The host Machine 300kN One Set Cylinder Down-setting
2 Electro-hydraulic Servo Oil One Set Desktop
Sources
3 Electro-hydraulic Servo valve One Imported ATOS
4 High-pressure Oil Pump One
5 Oil pressure sensor One 300kN
6 Hand Control Box One
7 Extensometer One Gauge Length: 50mm;
Deformation:10mm
8 Special Data Acquisition Card One
5
9 Special Measurement and One
Control Software
10 Commercial Brand Computer One Lenovo
11 Brand Printer One HP Color Inkjet A4
12 Tensile Fixture One Round Jaw Φ10-Φ20 Φ20-Φ32
One Flat Jaw 0-15mm
Compression Fixture One Φ188mm
13 Foundation Bolt Four M16x300mm
6
JB-300S Digital Display Impact Testing
Machine
1, Introduction
JB-300S digital display impact tester is used to determine the resistance of
metal materials to impact under dynamic load in order to judge the
properties of materials under dynamic load. The absorption work of the
sample is obtained by using the difference between the front energy of the
pendulum impact and the remaining potential energy after the impact on the
dial. The maximum impact energy is 300J, and a 150J pendulum is
7
attached. The sample used is (10×10) mm. This machine has large impact
energy and is suitable for ferrous metals with high impact toughness, such
as steel and its alloys.
This machine is a semi-automatic control test machine. The electric
appliance controls the automatic swing, impact and swing, easy to operate
and high work efficiency. After the sample is broken, the remaining energy
is automatically lifted and ready for the next impact test. Therefore, the
8
The main body of the machine is made of cast steel material, which makes
it rigid and stable during the whole test process. It has strong impact
resistance, is not easy to deform, and has accurate test results and long
service life. The use of a large torque clutch and a high-power motor makes
9
Each small grid pointing value: 1J, 2J
0-300J M=160.7695N.m
0-150J M=80.3848N.m
5. The distance between the center of rotation and the impact point
order.)
9. the round angle of the pounding knife edge: R2-2.5mm (8mm is special
order.)
10
13. angle measurement range: 0-360 °
14. angular resolution: ≤0.06 °
15. Specimen specifications: 55 × 10 (7.5 or 5)× 10mm
16. The net weight testing machine: 420kg
17. The external form dimension of the testing machine: 2150 × 640 ×
1400mm
18. Power Supply: Three-phase four-wire 50Hz, 380V, 400W
250W (main motor)
19. Working condition:
(1) within the room temperature of 20°C±5°C;
(4) mounted on the concrete foundation thickness not less than 200mm or
3, Main configurations:
1, 300J host one
11
2, 300J, 150J pendulum each one
3, LCD digital display controller one
4, span search board one
5, the sample centering device one
6, remover one(for changing pendulum)
7, anchor bolts four
8, safety protection device one
12
ⅠModel: CSL-Y
Ⅱ performance characteristics:
The impact specimen notch broaching machine is the only tool that can
process the notch of the qualified Charpy impact specimen except for the optical
of the broach operation and the geometric accuracy of the notch. This product is
equipped with a double-station broach that can process two sample notches at
the same time: one V-shaped (2mm deep) and one U-shaped (2mm deep) (also
two V-shaped or two U-shaped notches). No need to change the tool whether
13
processed in 8 seconds, and the operation is simple and reliable. The broach of
the broaching machine is made of W18Cr4V material with high hardness and
good wear resistance. Each tool can process more than 20,000 samples. The
broach, and is equipped with a garbage box for easy cleaning of iron filings.
impact test method" and GB/T 229-2007 "Metal Charpy Notched Impact Test
Method". If the structural form is changed and related parts are replaced, it can
departments.
Ⅲ Technical parameters:
14
4. Cutting speed: 2.5m/min
IV Working conditions:
electromagnetic interference.
15
Gap Projector Technical Programme
16
1. Host one
2. Base adjustment button four
3. Power line one
4. Halogen tungsten lamp two
5. Flat glass plate one
17
CDW-30-type low-temperature impact testing instrument is the
compressor refrigeration of the latest research and development in
accordance with cooling requirement of GB229-2007 "metal Charpy
notched impact test method". This equipment used refrigeration compressor
technology, the use of the principle of heat balance and mixing method of
circulation to achieve uniformity of the sample auto-cooling and
temperature, to fully meet the temperature indicators of national standard
GB229-2007 of the provisions. The equipment is simple, convenient and
efficient for working, which is the ideal equipment of specimen cooling and
insulation for low-temperature impact testing. At the same time, it can also
be used for other low-temperature detection and testing.
Ⅳ Main technical parameters:
1.Temperature range: room temperature~ -30 ℃ (room temperature ≤ 25
℃)
2. Temperature accuracy: ± 0.5 ℃
3. Cooling speed: room temperature ~ 0 ℃ about 1.5 ℃ / min
0 ℃ ~ -20 ℃ about 1.0 ℃ / min
-20 ℃ ~ -30 ℃ about 0.8 ℃ / min
4. Maximum dimension of the external form: 910 × 510 × 920mm (length ×
width × height)
5. The effective dimensions of studio: 275 × 160 × 120mm (length ×
width× height)
18
6. Quantity of sample can be loaded: > 60 (the impact of sample size: 10 ×
10 × 55mm)
7. Digital timer: 1minute ~ 9999 minutes, 1minute resolution
8. Cooling medium: ethanol or other ice-free liquid
9. Stirring motor: 23W
10. Working power: 220V ~ 240V, 50Hz, 1.5kW
11. Operating environment temperature :5℃~25 ℃
Ⅴ Equipment configuration
1. One host (including Embraco compressor, fan and so on)
2. One transducer
3. Three sample baskets
19
DX-400 Gauging Length Instrument of Tensile
Specimen
Purchase Proposals
Brief introduction
This machine is designed and manufactured in accordance with tensile
testing of metallic materials requirements of GB228-2002 and the needs of
different users, and it is accurate for , efficient for working , easy to operate
and so on, it is an required supporting equipment for laboratories.
20
Working Principle
It is rotating 360 degree through a shaft with spiral bands, it can lift
Punch, rising and declining vertically at different angles, dotting with the
impact of elastic spring, the handle shaking one circle will make a straight
line on the specimen, the space of 10 mm, a total of 40 points = 400 mm
long.
Methods of operation
1. This machine will be put on a working table about 500 millimeters from
the ground, the specimen will be on the V-slot, be placed in the appropriate
place away from the subscript.
2. Push the bending parts of the upper the bending hander with the left hand
,after pressing hard specimen ,shake the right end of the handle in a circle
with your right hand, then you can mark the point.
3. Bring the bending handle upward, and then removing the specimen can
complete the purpose of marking distance.
4. Due to different sizes of specimen diameter, when being used, in
accordance with deferent sizes of the specimen diameter, you can adjust the
bottom nut of the two columns, to make punch cutting-edge and the
specimen keep a safe distance.
5. When used, you should keep the two pillars and parts of punch
lubricated, or it will be operated effortlessly.
6. It is necessary to pay strict attention to bumps, in order to avoid the loss
21
of cutting-edge precision of the instrument resulting, do not bump the
pointed end punch.
Main technical specifications
1. The longest distance of 400 mm
2. The form of 490 millimeters long, 200 millimeters wide, 300 millimeters
high
3. Each net weight 22kg
22