Professional Documents
Culture Documents
Enviormental Studies Microproject
Enviormental Studies Microproject
ANNEXURE-II
Evaluation Sheet for the Micro Project (*****)
---------------------------------------------------------------------------------------
Academic Year: 2021-2022 Course: CO Semester: fifth
Name of faculty: Ms.N. Shah Course Code: 22516 Subject: Operating System
-----------------------------------------------------------------------------------------------------
B.
C.
1
Major Learning Outcomes Achieved by students by doing the projects A.
B.
C.
Comments /Suggestion about Term work /leadership /Interpersonal Communication (if any)
Roll Enrollment Name Of Seat Number Marks Out of 6 Marks Out Total
No No Students for performance of 6 for Out Of
in group activity 10
(D5.Col 8) performance
in group
activity D5.
Col
Group Members
Guide H.O.D
Ms.N. Shah Mr.P.B.Agrawal
3
Undertaking
I declare that the work presented in this project titled “Report on Household
Water Filtrations Unit” Submitted to the computer engineering department.
Bareiolly for the award of “Diploma in Computer Engineering
Department” is my original work. I have not plagiarized or submitted the same
work for the award of any other diploma.
Date:
Place:
4
CERTIFICATE
Certified that the work contained in the project titled “Report on Household Water
Filtrations Unit ”
1. Jaya S. Bhutekar
2. Priyanka Hiwale
3. Komal Nagre
4. Mayuri Parmeshwari
Has been carried out under my supervision and that this work has not been
submitted elsewhere for diploma.
5
CONTENTS
1 INTRODUCTION 1
2 TYPES OF FILTRATIONS 2
3 ADVANTAGES 3-7
4 DISADVANTAGES 8
5 GOALS OF FILTRATIONS 9
8 RESULT 12
6
9 CONCLUSION 13
10 REFERENCE 14
7
INTRODUCTION
suspended solids, and gases from water. The goal is to produce water fit for specific purposes.
Most water is purified and disinfected for human consumption (drinking water), but water
purification may also be carried out for a variety of other purposes, including medical,
pharmacological, chemical, and industrial applications. The methods used include physical
processes such as filtration, sedimentation, and distillation; biological processes such as slow
sand filters or biologically active carbon chemical processes such as flocculation and
chlorination and the use of electromagnetic radiation such as ultraviolet light.
Water purification may reduce the concentration of particulate matter including suspended
particles, parasites, bacteria, algae, viruses, and fungi as well as reduce the concentration of a
range of dissolved and particulate matter.
The standards for drinking water quality are typically set by governments or by international
standards. These standards usually include minimum and maximum concentrations of
contaminants, depending on the intended
Visual inspection cannot determine if water is of appropriate quality. Simple procedures such as
boiling or the
8
use of a household activated carbon filter are not sufficient for treating all possible
contaminants that may be present in water from an unknown source. Even natural spring water –
considered safe for all practical purposes
in the 19th century – must now be tested before determining what kind of treatment, if any, is
needed. Chemical and microbiological analysis, while expensive, are the only way to obtain the
Activated Carbon
Carbon removes contaminants by chemically bonding to the water that is poured into the
system. Some are only effective at removing chlorine, which only improves taste and odor,
while others remove more harmful contaminants, such as mercury and lead. It is important to
note that carbon filters do not have the ability to
remove inorganic pollutants such as nitrates, fluoride, and arsenic. Carbon filters are usually
sold in block or granulated form to consumers.
9
10
Cloth filter
Developed for a main use in Bangladesh, the cloth filter is a simple and cost-effective
appropriate technology method for reducing the contamination of drinking water. Water
collected in this way has a greatly reduced pathogen count - though it will not
necessarily be perfectly safe, it is an improvement for poor people with limited options.
Filtering water to free it from micro-organisms has been an age-old practice among Jains who
carefully remove the micro-organisms in the cloth through filtered water in order to follow
doctrine of Ahimsa or non-violence, preventing pain to any living creature.
11
Carbon Block
Carbon block filters are block-shaped filters that are composed of crushed carbon particles.
These filters tend to be more effective than other types of carbon-based filters since they have a
larger surface area. The rate at which water flows through these filters has a direct impact on
their level of effectiveness. Fibredyne carbon block filters have a greater sediment-holding
capacity than other types of block filters.
12
13
Distillation
Distillation is one of the oldest water purification methods. It vaporizes water by heating it to
exceptionally high temperatures.
The vapor is then condensed back into drinkable, liquid water. Distillation removes minerals,
microorganisms, and chemicals that have a high boiling point. These filters cannot remove
chlorine and many other volatile organic chemicals.
14
Biosand filter
traditional slowsand filters. Biosand filters remove pathogens and suspended solids from
water using biological and physical processes that take place in a sand column covered with
a biofilm. BSFs have been shown to remove heavy metals, turbidity, bacteria,
viruses and protozoa. BSFs also reduce discoloration, odor and unpleasant taste. Studies have
of diarrhea. Because of their effectiveness, ease of use, and lack of recurring costs,
15
16
ADVANTAGES
1. After the water has been purified it is separated from unwanted substances.
4. It is a simple process.
17
DISADVANTAGES
1. Not all germs and contaminants are removed from filtered water. When the process is
taking place very, small particles can pass through the membranes used to perform
water filtering.
2. Thorough cleaning and care of the equipment are very vital so that they can carry out the
water softening process without any hitch whatsoever.
3. All the cartridges must be disposed of after the water softening process. These cartridges
contain harmful toxins that were purified from the hard water. If they are thrown anyhow
they might end up being pollutants to the environment.
18
GOALS OF FILTERATION
The goals of the treatment are to remove unwanted constituents in the water and to make it safe
to drink or fit for a specific purpose in industry or medical applications. Widely varied
techniques are available to remove contaminants like fine solids, micro-organisms and some
dissolved inorganic and organic materials, or environmental persistent pharmaceutical
pollutants. The choice of method will depend on the quality of the water being treated,
the cost of the treatment process and the quality standards expected of the processed water.
The processes below are the ones commonly used in water purification plants. Some or most
may not be used depending on the scale of the plant and quality of the raw (source) water.
19
RESULT
20
CONCLUSION
Thus, we successfully created a report on household water filtrations unit. We have added of
21
REFERENCE
1. https://en.wikipedia.org/wiki/Water_purification#Goals
2. https://learn.allergyandair.com/water-filters/
3. https://www.quora.com/What-are-the-advantages-and-disadvantages-of-filtration
4. https://www.process-cooling.com/articles/89530-what-are-your-water-treatment-goals
5. https://en.wikipedia.org/wiki/Clot
22