Professional Documents
Culture Documents
3LUu61lPn2017 Webu Catalog v1 2
3LUu61lPn2017 Webu Catalog v1 2
ENHANCEMENT
Product Catalogue
2017
Legal Disclaimer
Comba Telecom Ltd retains copyright on all the text, graphics and trademarks displayed on this paper. All the text, graphics and
trademarks displayed on this paper are owned by Comba Telecom Ltd and used under licence by Comba affiliates.
You may print copies of the information on this paper and store the files on your computer for your personal use. You may not
distribute text or graphics to others without the express written consent of Comba Telecom Ltd and Comba affiliates. Also, you
may not, without our permission, copy and distribute this information on any other server, or modify or reuse text or graphics on this
or any other system.
No reproduction of any part of the paper may be sold or distributed for commercial gain, nor shall it be modified or incorporated in
any other work, publication or site, whether in hardcopy or electronic format, including postings to any other site. Comba Telecom
Ltd reserves all other rights.
The information on this paper had been included in good faith and is for general purposes only. It should not be realised upon for
any specific purpose and no representation or warranty is given as regards to its accuracy or completeness.
No Information on this paper shall constitute an invitation to invest in Comba Telecom Ltd or any of its affiliates. Neither
Comba Telecom Ltd and Comba affiliates, nor their or their affiliates' officers, employees or agents shall be liable for any
loss, damages or expenses arising out of any access to or use of this paper or any site linked to it, including, without
limitation, any loss of profit, indirect, incidental or consequential loss.
Index
About Us........................................................................................................................................................................6
Solution Overview ..........................................................................................................................................................7
Product Overview ...........................................................................................................................................................8
Comba DAS - ComFlex Series Overview .............................................................................................................................8
Comba Wireless Repeater Series Overview .........................................................................................................................9
CMS Typical Network Management Diagram......................................................................................................................10
WEBU Profile................................................................................................................................................................ 11
Product Application Scenario ........................................................................................................................................14
ComFlex Series Distributed Antenna System .....................................................................................................................19
ComFlex-5H00(CI) 1W2W ..................................................................................................................................19
ComFlex-5000(CI) 1W2W ..................................................................................................................................22
ComFlex-6100(CI) 1W ........................................................................................................................................25
ComFlex-4500(CI) 2W5W ..................................................................................................................................28
ComFlex-4100(CI) 5W ........................................................................................................................................31
ComFlex-5200(CI) 20W40W ..............................................................................................................................34
ComFlex-5P00(CI) 20W .....................................................................................................................................37
ComFlex-5000(CI) 20W40W ..............................................................................................................................40
ComFlex-4500(CI) 10W20W ..............................................................................................................................43
ComFlex-4C00(CI) 20W40W ..............................................................................................................................46
ComFlex-4100(CI) 40W ......................................................................................................................................49
ComFlex CM 20W ..............................................................................................................................................52
ComFlex-8A00(CM) 20W ...................................................................................................................................58
ComFlex-8C00(CM) 20W ...................................................................................................................................61
ComFlex-5M00(AI) 10W20W .............................................................................................................................64
ComFlex-5900(AM) 20W ....................................................................................................................................67
ComFlex-4100(AM) 20W ....................................................................................................................................70
ComFlex-8A00(AM) 20W ...................................................................................................................................73
RX Series Digital Band Selective Repeater .........................................................................................................................76
RX-0739...............................................................................................................................................................78
RX-8132...............................................................................................................................................................79
RX-9139...............................................................................................................................................................80
RX-1839...............................................................................................................................................................81
RX-1939...............................................................................................................................................................82
RX-2139...............................................................................................................................................................83
RX-2620...............................................................................................................................................................84
Multi-band Digital Band Selective Repeater ........................................................................................................................85
RX-7137...............................................................................................................................................................88
RX-7539...............................................................................................................................................................90
RX-7639...............................................................................................................................................................92
RX-7839...............................................................................................................................................................94
RX-5239...............................................................................................................................................................96
RX Series Digital Channel Selective Repeater.....................................................................................................................98
RX-2123 III3 ........................................................................................................................................................98
RX-0823.............................................................................................................................................................100
RX-2123 IV4 ......................................................................................................................................................102
RX-0823.............................................................................................................................................................105
RX-9123.............................................................................................................................................................106
700/800MHz Public Safety Bi-directional Amplifier ............................................................................................................109
RX-7W22 ...........................................................................................................................................................109
800MHz Tetra Band Selective Repeater ............................................................................................................................ 111
RX-8039............................................................................................................................................................. 111
mBDA Series Digital Band Selective Repeater .................................................................................................................. 112
mBDA-0733 ...................................................................................................................................................... 113
mBDA-0833 ...................................................................................................................................................... 114
mBDA-9133 ...................................................................................................................................................... 115
mBDA-1833 ...................................................................................................................................................... 116
mBDA-1933 ...................................................................................................................................................... 117
mBDA-2033 ...................................................................................................................................................... 118
mBDA-2133 ...................................................................................................................................................... 119
mBDA-2633 ......................................................................................................................................................120
Combiner for Dual Single Band mBDAs ...................................................................................................................121
mBDA Indoor Digital Band Selective Repeater ..................................................................................................................123
mBDA-100.........................................................................................................................................................123
mBDA-200S ......................................................................................................................................................126
mBDA-300.........................................................................................................................................................130
Band Adjustable Pico Repeater ......................................................................................................................................134
SP-9110 .............................................................................................................................................................135
SP-2110 .............................................................................................................................................................136
MP Series Digital Pico Repeater .....................................................................................................................................137
MP-0832 ............................................................................................................................................................138
MP-8132 ............................................................................................................................................................139
MP-9132 ............................................................................................................................................................140
MP-1832 ............................................................................................................................................................141
MP-1932 ............................................................................................................................................................142
MP-2132 ............................................................................................................................................................143
MP-2632 ............................................................................................................................................................144
Multi-band Digital Pico Repeater.....................................................................................................................................145
Dual-band Digital Pico Repeater .....................................................................................................................................146
MP-7V32 ............................................................................................................................................................146
MP-7532 ............................................................................................................................................................148
MP-7632 ............................................................................................................................................................150
MP-7832 ............................................................................................................................................................152
Tri-band Digital Pico Repeater ........................................................................................................................................153
MP-5K32............................................................................................................................................................153
MP-5232 ............................................................................................................................................................154
MP-5832 ............................................................................................................................................................155
Location System- RSSI Base Station ...............................................................................................................................160
LB-2112 .............................................................................................................................................................160
Location System- TDOA Base Station .............................................................................................................................162
LB-2115 .............................................................................................................................................................162
Location System- Software Platform ...............................................................................................................................164
LIMS ..................................................................................................................................................................164
Location System- ID Tag................................................................................................................................................167
LT-2102..............................................................................................................................................................167
Location System-Wrist Strap..........................................................................................................................................168
LT-2103 II2.........................................................................................................................................................168
Location System-TDOA Base Station ..............................................................................................................................170
TDJ-2400BKF-Y ................................................................................................................................................170
Coverage Management System ......................................................................................................................................171
CMS V8.2 ..........................................................................................................................................................171
About Us
Comba Telecom is a leading supplier of infrastructure and wireless enhancement solutions to mobile operators and enterprises
to enhance and extend their wireless communications networks. Established in 1997, and listed on the Hong Kong Stock
Exchange in 2003, it has grown to become a global supplier with its extensive distribution network and 60+ offices globally.
With seasoned team of research and development engineers and its state-of-the-art design tools and testing equipment, Comba
is able to provide its innovative patented designs and yet cost-effective products to the customers. After working with Operators /
Private enterprise networks seamless all over the word for more than 10 years, it is able to help the customers to roll out their full
scale range network quickly with the professional, customized, quality guarantee product solutions.
Comba Wireless Enhancement Business Unit offers full range of wireless enhancement products, also Coverage
Management System (CMS) for wireless communication network systems, which include:
Active DAS
Wireless Repeater
Public Safety Repeater
Location System
Coverage Management System
Comba is committed to quality consistency and environmental protection and is ISO9001 and ISO14001 certified. With its highly
efficiency production lines in China and strict process control system, Comba's manufacturing facility is able to deliver high volume
products with consistent quality.
Comba Manufacturing Facility in Guangzhou, China Comba R&D Centre in Guangzhou, China
Solution Overview Applications
Scenic Areas
Stadium/Large Venues In-Building Solutions
(Camouflaged Solutions)
Solution Overview
Comba’s wide range of indoor/outdoor repeater products provide total solutions for mobile network from covering blind sports to
implementing integrated coverage systems. The deployment of repeaters will effectively optimized network efficiency by
centralizing / redirecting traffic capacity and enhancing power budget.
Compliant to all major technologies including GSM, CDMA, WCDMA, LTE, and Tetra.
Widely frequency range compliance e.g. 700MHz, 800MHz, 850MHz, 900MHz, 1800MHz, 1900MHz, AWS, 2100MHz,
Wide range of product line that can be used from high-rise building to underground railway for all kinds of applications.
Product Overview
Comba DAS - ComFlex Series Overview
Highlight: Highlight:
Max. 100W input power from BTS. Max. 100W input power from BTS.
WEB GUI, RF routing and diagnosis function. WEB GUI, RF routing and diagnosis function.
Max. supports 32 RF input and 32 RUs connection. Max. supports 32 RF input and 32 RUs connection.
RU output power 1/2/5/10/20/40W. Modular designed RU supports up to 8 bands, 20W per
Highlight:
Max. 100W input power from BTS.
-163dBc PIM.
WEB GUI
Highlight: Highlight:
Max. supports 8 RF input and 16 RUs. Max. supports 8 RF input and 16 RUs.
Modular design easy for upgrade and maintenance. Modular design easy for upgrade and maintenance.
Supports multi-operator input and each adjustable gain. Supports multi-operator input and each adjustable gain.
Comba Wireless Repeater Series Overview
4 Sub bands, 90 dB gain. Support ICS, 105 dB gain. Support Tetra system.
Outdoor mBDA
Indoor mBDA Series Series
Highlight: Highlight:
Support indoor. Support outdoor.
3 Sub bands, 80 dB gain. 3 Sub bands, 80 dB gain.
0.5/1/2W output power. 0.5/1/2W output power.
Support up to 6 Bands. Support Dual/Tri Bands.
Analog Pico
Series Digital Pico Series
Highlight: Highlight:
GPRS/CDMA
1x/HSDPA Repeater1 Repeater2
OMT v5
Repeater3 ...
700/800E/850/900/1800/1900/
1W AWS/2100/2300/
GSM/UMTS/
ComFlex MU (Max. 2600
LTE/CDMA
Input) Max. 8
MU
700/800E/850/900/1800/
100 W
ComFlex Plus 1900/AWS/2100/2300/ GSM/UMTS/
(Max.
ACU 2600 LTE/CDMA
Input)
Max. 32
700/800/850/900/1800/
2/5 W 1900/AWS/2100/2300/ GSM/UMTS/
Low Power RU
(Output) 2600 LTE/CDMA
Max. 4
700/800/850/900/1800/
1900/AWS/2100/2300/
20/40 W GSM/UMTS/
RU High Power RU 2600
(Output) LTE/CDMA
Max. 4
700/800E/850/900/1800/
1900/AWS/2100/2300/
10/20 W GSM/UMTS/
Modular RU 2600
(Output) LTE/CDMA
Max. 8
Wireless Repeater High Power RX Series
Band
800/850/900/1800/1900/ GSM/UMTS/
Selective RX-xx39 5/10 W
2100/2600 LTE/CMDA
RX Series
Channel
GSM/UMTS/
Selective RX-xx23 5/10/20 W 800E/900/2100
LTE
RX Series
Public
Safety RX-7W22 2W 700/800 Tetra
RX Series
Analog GSM/UMTS/
Sx-xx10 15/17 dBm 900/2100
Pico LTE/CDMA
Base
LB-2xxx 16/19dBm 2400 TDOA/RSSI
Station
2
Product application Scenario 1: Mega (>10,000 m )
Note:
DAS ComFlex CI: Page 19.
DAS ComFlex CM: Page 52.
DAS ComFlex AI: Page 64.
DAS ComFlex AM: Page 67.
2
Product application Scenario 2: Large (5,000 – 10,000 m )
Note:
DAS ComFlex CI: Page 19.
DAS ComFlex CM: Page 52.
Wireless Repeater RX Series: Page 76.
Wireless Repeater mBDA Indoor Series: Page 112.
Product application Scenario 3: Medium (1,000 – 5,000 m2)
Park Supermarket
Note:
DAS ComFlex CI: Page 19.
DAS ComFlex CM: Page 52.
Wireless Repeater RX Series: Page 76.
Wireless Repeater mBDA Series: Page 112.
Product application Scenario 4: small (< 1,000 m2)
Note:
Wireless Repeater mBDA Series: Page 112.
Wireless Repeater Pico: Page 134.
Product application Scenario 5: Special Scenario 1
Mine Prison
Note:
Wireless Repeater RX Series: Page 76.
Wireless Repeater mBDA Series: Page 112.
Wireless Repeater Pico: Page 134.
Location System: Page 160.
ComFlex Series Distributed Antenna System
ComFlex-5H00(CI) 1W2W
Features
Modularized Master Unit supports field upgrade and independent gain control.
RF module supports both simplex and duplex.
Compact slim Remote Unit for OPEX saving.
Full operation bandwidth system supports multi-operator application.
Supports all major technologies GSM, CDMA, WCDMA and LTE.
Comply with 3GPP.
Optical link auto gain control.
Web based GUI for intelligent commissioning and configuration.
Product Description
The ComFlex series Distributed Antenna System is an RF over fiber solution that enhances a wireless network’s
coverage by extending cellular services from existing cell sites to an indoor environment. The system consists of the
Master Unit (MU) and low power Remote Unit (RU). The MU includes the Chassis, Power Supply Unit (PSU), Fibre
Optical Unit (FOU) and RF Unit (RFU). With a modular design, it can support up to 8 independent RF inputs and 8
Remote Units. The Remote Unit is designed with a compact and slim form factor for easy installation; it is an
integrated design which supports 3 independent bands, 850MHz, 1900MHz and 2600MHz.
This solution is an effective point-to-multipoint distributed antenna system that provides effective coverage
enhancement. The Comba Tri-Band DAS offers service providers an optimal solution for multiple applications from a
single building to a campus, mega mall, or sports arena and beyond.
SISO System …
(optional)
BTS DAS Tray
MIMO System
LRU 1A LRU 1B LRU 4A LRU 4B
BTS 1 (optional)
DAS Tray
…
BTS 2
Electrical
850MHz 1900MHz 2600MHz
Uplink Frequency Range 824-849 1850-1910 2500-2570
MHz
Downlink Frequency Range 869-894 1930-1990 2620-2690
Operating Bandwidth MHz 25 60 70
Uplink Output Power dBm -25 -25 -25
Downlink Output Power dBm 30/33 30/33 30/33
Uplink Maximum gain dB 20 @ 1W; 23 @ 2W
Downlink Maximum gain dB 20 @ 1W; 23 @ 2W
ATT Adjustable Range(1dB step) dB MU: 0-40; RU: 0-15
Pass Band Ripple (p-p) dB ≤5 ≤6 ≤6
Spurious emission 3GPP TS 25.106 3GPP TS 25.106 3GPP TS 36.106
Uplink Noise Figure at Maximum
dB ≤6
Gain
System Delay sec ≤2
VSWR ≤ 1.5
Max. Input RF Power at Master Unit dBm 30
Mechanical---MU
Chassis 178 x 482 x 360
Fiber Optical Unit 37 x 185 x 299
Dimensions, H x W x D mm
Per RF Unit 103 x 46 x 259
Power Supply Unit 140 x 63 x 400
Chassis 12
Fiber Optical Unit 2
Weight (approx.) kg
Per RF Unit 1
Power Supply Unit 2.5
Power Supply VAC 100-240/50-60Hz
Power Consumption (approx.) W 85
RF Connectors N-Female
Fiber Connectors SC/APC
o
Operating Temperature C 0 to +40
Operating Humidity ≤ 85%
Ingress protection IP30
Enclosure Cooling Convection
Installation Type 19” Rack
Product Description
The ComFlex series Distributed Antenna System is an RF over fiber solution that enhances a wireless network’s
coverage by extending cellular services from existing cell sites to an indoor environment. The system consists of the
Master Unit (MU) and low power Remote Unit (RU). The MU includes the Chassis, Power Supply Unit (PSU), Fibre
Optical Unit (FOU) and RF Unit (RFU). With a modular design, it can support up to 8 independent RF inputs and 8
Remote Units. The Remote Unit is designed with a compact and slim form factor for easy installation; it is an
integrated design which supports 3 independent bands, 1900MHz, AWS and AWS MIMO.
This solution is an effective point-to-multipoint distributed antenna system that provides effective coverage
enhancement. The Comba Tri-Band DAS offers service providers an optimal solution for multiple applications from a
single building to a campus, mega mall, or sports arena and beyond.
LRU 1 LRU 4
BTS 1 (optional)
DAS Tray
…
BTS 2
Electrical
1900MHz AWS AWS MIMO
Uplink Frequency Range 1850-1910 1710-1755 1710-1755
MHz
Downlink Frequency Range 1930-1990 2110-2155 2110-2155
Operating Bandwidth MHz 60 45 45
Uplink Output Power dBm -25 -25 -25
Downlink Output Power dBm 30/33 30/33 30/33
Uplink Maximum gain dB 20 @ 1W; 23 @ 2W
Downlink Maximum gain dB 20 @ 1W; 23 @ 2W
ATT Adjustable Range(1dB step) dB MU: 0-40; RU: 0-15
Pass Band Ripple (p-p) dB ≤6 ≤6 ≤6
3GPP TS 25.106 3GPP TS 25.106
Spurious emission 3GPP TS 25.106
3GPP TS 36.106 3GPP TS 36.106
Uplink Noise Figure at Maximum
dB ≤6
Gain
System Delay sec ≤2
VSWR ≤ 1.5
Max. Input RF Power at Master Unit dBm 30
Mechanical---MU
Chassis 178 x 482 x 360
Fiber Optical Unit 37 x 185 x 299
Dimensions, H x W x D mm
Per RF Unit 103 x 46 x 259
Power Supply Unit 140 x 63 x 400
Chassis 12
Fiber Optical Unit 2
Weight (approx.) kg
Per RF Unit 1
Power Supply Unit 2.5
Power Supply VAC 100-240/50-60Hz
Power Consumption (approx.) W 85
RF Connectors N-Female
Fiber Connectors SC/APC
o
Operating Temperature C 0 to +40
Operating Humidity ≤ 85%
Ingress protection IP30
Enclosure Cooling Convection
Installation Type 19” Rack
Product Description
The ComFlex 600 series Distributed Antenna System is an RF over fiber solution that enhances a wireless network’s
coverage by extending cellular services from existing cell sites to an indoor environment. The system consists of the
Master Unit (MU) and Low power Remote Unit (RU). The MU includes the Chassis, Power Supply Unit (PSU), Fiber
Optical Unit (FOU) and RF Unit (RFU). With a modular design, it can support up to 8 independent RF inputs and 8
Remote Units. The Remote Unit is designed with a compact and slim form factor for easy installation; it is an
integrated design which supports 6 independent bands: 700MHz (lower ABC), 700MHz (upper C), 800MHz,
850MHz, 1900MHz, and AWS band.
This solution is an effective point-to-multipoint distributed antenna system that provides effective coverage
enhancement. The Comba Hex-Band DAS offers service providers an optimal solution for variable venue sizes such
as single buildings, office campuses, megamalls and sports arenas.
Electrical
700MHz 800/850MHz 1900MHz AWS
Uplink Frequency Range 698-716/776-787 817-824/824-849 1850-1915 1710-1755
MHz
Downlink Frequency Range 728-746/746-757 862-869/869-894 1930-1995 2110-2155
Operating Bandwidth MHz 18/11 7/25 65 45
Uplink Output Power dBm -25 -25 -25 -25
Downlink Output Power dBm 30 30 30 30
Uplink Maximum Gain dB 20
Downlink Maximum Gain dB 20
ATT Adjustable Range(1dB
dB MU: 0-40, RU: 0-30
step)
Pass Band Ripple (p-p) dB ≤4 ≤6 ≤6 ≤4
3GPP TS 25.106
3GPP TS 36.106 3GPP TS 36.106 3GPP TS 25.106
Spurious Emission 3GPP TS 36.106
FCC FCC FCC
FCC
Uplink Noise Figure at
dB ≤6
Maximum Gain
System Delay sec ≤3
VSWR ≤ 1.5
Max. Input RF Power at
dBm 30
Master Unit
Mechanical---MU
Chassis 7” x 19” x 15.7” (178 x 482 x 400)
Fiber Optical Unit 1.5” x 7.3” x 11.8” (37 x 185 x 299)
Dimensions, H x W x D in(mm)
Per RF Unit 4.1” x 1.8” x 10.2” (103 x 46 x 259)
Power Supply Unit 5.5” x 2.5” x 15.7” (140 x 63 x 400)
Chassis 24.3 (11)
Fiber Optical Unit 4.4 (2)
Weight (approx.) lb(kg)
Per RF Unit 2.2 (1)
Power Supply Unit 5.5 (2.5)
Power Supply VAC 100-240/50-60Hz
Power Consumption (approx.) W 85
RF Connectors Mini DIN-Female
QMA-Female
Coupling Port Connectors
(For UL related testing, coupling value: -5dB)
Fiber Connectors SC/APC
o
Operating Temperature C 0 to 40
Operating Humidity ≤ 85%
Ingress Protection IP30
Enclosure Cooling Convection
Installation Type 19” Rack
Product Description
The ComFlex series Distributed Antenna System is an RF over fiber solution that enhances a wireless network’s
coverage by extending cellular services from existing cell sites to an indoor environment. The system consists of the
Master Unit (MU) and medium power Remote Unit (RU). The MU includes the Chassis, Power Supply Unit (PSU),
Fibre Optical Unit (FOU) and RF Unit (RFU). With a modular design, it can support up to 8 independent RF inputs
and 8 Remote Units. The Remote Unit is designed with a compact and slim form factor for easy installation; it is an
integrated design which supports 4 independent bands, 900MHz, 1800MHz, 2100MHz and 1800MIMO.
This solution is an effective point-to-multipoint distributed antenna system that provides effective coverage
enhancement. The Comba Quad-Band DAS offers service providers an optimal solution for multiple applications
from a single building to a campus, mega mall, or sports arena and beyond.
MIMO System
RU A1 RU B1 RU A4 RU B4
BTS 1 (optional)
DAS Tray
…
BTS 2
Electrical
850MHz 1800MHz 2100MHz 2600MHz
Uplink Frequency Range 824-849 1710-1785 1920-1980 2500-2570
MHz
Downlink Frequency Range 869-894 1805-1880 2110-2170 2620-2690
Operating Bandwidth MHz 25 75 60 70
Uplink Output Power dBm -20 -20 -20 -20
Downlink Output Power dBm 33/37 33/37 33/37 33/37
Uplink Maximum gain dB 23@2W, 27@5W
Downlink Maximum gain dB 23@2W, 27@5W
ATT Adjustable Range(1dB
dB MU: 0-40, RU: 0-30
step)
Pass Band Ripple (p-p) dB ≤4 ≤5 ≤5 ≤5
Spurious emission 3GPP TS 25.106 3GPP TS 36.106 3GPP TS 25.106 3GPP TS 36.106
Uplink Noise Figure at
dB ≤6
Maximum Gain
System Delay sec ≤3
VSWR ≤ 1.5
Max. Input RF Power at
dBm 30
Master Unit
MTBF hr >100,000
Mechanical---MU
Chassis 178 x 482 x 360
Fiber Optical Unit 37 x 185 x 299
Dimensions, H x W x D mm
Per RF Unit 103 x 46 x 259
Power Supply Unit 140 x 63 x 400
Chassis 11
Fiber Optical Unit 2
Weight (approx.) kg
Per RF Unit 1
Power Supply Unit 2.5
Power Supply VAC 100-240/50-60Hz
Power Consumption (approx.) W 85
RF Connectors N-Female
Fiber Connectors SC/APC
o
Operating Temperature C 0 to +40
Operating Humidity ≤ 85%
Ingress protection IP30
Enclosure Cooling Convection
Installation Type 19” Rack
Product Description
The ComFlex series Distributed Antenna System is an RF over fiber solution that enhances a wireless
network’s coverage by extending cellular services from existing cell sites to an indoor environment. The system
consists of the Master Unit (MU) and medium power Remote Unit (RU). The MU includes the Chassis, Power
Supply Unit (PSU), Fiber Optical Unit (FOU) and RF Unit (RFU). With a modular design, it can support up to 8
independent RF inputs and 8 Remote Units. The Remote Unit is designed with a compact and slim form factor
for easy installation; it is an integrated design which supports 4 independent bands 900MHz, 1800MHz,
2100MHz and 2600MHz.
This solution is an effective point-to-multipoint distributed antenna system that provides effective coverage
enhancement. The Comba DAS offers service providers an optimal solution for variable venue sizes such as
single buildings, office campuses, mega malls and sports arenas.
SISO System …
(optional)
BTS DAS Tray
MIMO System
RU 1A RU 1B RU 4A RU 4B
BTS 1 (optional)
DAS Tray
…
BTS 2
Electrical
900MHz 1800MHz 2100MHz 2600MHz
Uplink Frequency Range 880-915 1710-1785 1920-1980 2500-2570
MHz
Downlink Frequency Range 925-960 1805-1880 2110-2170 2620-2690
Operating Bandwidth MHz 35 75 60 70
Uplink Output Power dBm -20 -20 -20 -20
Downlink Output Power dBm 37 37 37 37
Uplink Maximum gain dB 27
Downlink Maximum gain dB 27
ATT Adjustable Range (1dB step) dB MU: 0-40, RU: 0-30
Pass Band Ripple (p-p) dB ≤5 ≤6 ≤5 ≤6
3GPP TS25.106 3GPP TS25.106
Spurious emission 3GPP TS25.106 3GPP TS 36.106
3GPP TS 36.106 3GPP TS 36.106
Uplink Noise Figure at Maximum Gain dB ≤6
System Delay sec ≤3
VSWR ≤ 1.5
Max. Input RF Power at Master Unit dBm 30
Mechanica---MU
Chassis 178 x 482 x 360
Fiber Optical Unit 37 x 185 x 299
Dimensions, H x W x D mm
RF Unit 103 x 46 x 259
Power Supply Unit 140 x 63 x 400
Chassis 12
Fiber Optical Unit 2
Weight (approx.) kg
RF Unit 1
Power Supply Unit 2.5
Power Supply VAC 100-240/50-60Hz
Power Consumption (approx.) W 85
RF Connectors N-Female
Fiber Connectors SC/APC
o
Operating Temperature C 0 to +40
Operating Humidity ≤ 85%
Ingress protection IP30
Enclosure Cooling Convection
Installation Type 19” Rack
License Note
License Code 900MHz 1800MHz 2100MHz 2600MHz
N/A √ √ √ √
Product Description
The ComFlex series Distributed Antenna System is an RF over fiber solution that enhances a wireless network’s
coverage by extending cellular services from existing cell sites to an indoor environment. The system consists of the
Master Unit (MU) and Remote Unit (RU). The MU includes the MU Rack, Power Supply Unit (PSU), Fiber Optical
Unit (FOU) and RF Unit (RFU). With a modular design, it can support up to 8 independent RF inputs and 8 Remote
Units. The Remote Unit is designed with a compact and slim form factor for easy installation; it is an integrated
design which supports 3 independent bands, 900MH, 1800MHz and 2100MHz.
This solution is an effective point-to-multipoint distributed antenna system that provides effective coverage
enhancement. The Comba Tri-Band DAS offers service providers an optimal solution for multiple applications from a
single building to a campus, mega mall, or sports arena and beyond.
SISO System …
(optional)
BTS DAS Tray
MIMO System
HRU 1A HRU 1B HRU 4A HRU 4B
BTS 1 (optional)
DAS Tray
…
BTS 2
Electrical
900MHz 1800MHz 2100MHz
Uplink Frequency Range 880-915 1710-1785 1920-1980
MHz
Downlink Frequency Range 925-960 1805-1880 2110-2170
Operating Bandwidth MHz 35 75 60
Uplink Output Power dBm -20 -20 -20
Downlink Output Power dBm 43/46 43/46 43/46
Uplink Maximum gain dB 33
Downlink Maximum gain dB 35@20W, 38@40W
ATT Adjustable Range (1dB step) dB MU: 0-40, RU: 0-30
Pass Band Ripple (p-p) dB ≤5 ≤6 ≤6
3GPP TS 25.106
Spurious emission 3GPP TS 25.106 3GPP TS 25.106
3GPP TS 36.106
Uplink Noise Figure at Maximum Gain dB ≤5
System Delay sec ≤2
VSWR ≤ 1.5
Max. Input RF Power at Master Unit dBm 30
Mechanical---MU
Chassis 178 x 482 x 360
Fiber Optical Unit 37 x 185 x 299
Dimensions, H x W x D mm
Per RF Unit 103 x 46 x 259
Power Supply Unit 140 x 63 x 400
Chassis 11
Fiber Optical Unit 2
Weight (approx.) kg
Per RF Unit 1
Power Supply Unit 2.5
Power Supply VAC 100-240/50-60Hz
Power Consumption (approx.) W 85
RF Connectors N-Female
Fiber Connectors SC/APC
o
Operating Temperature C 0 to +40
Operating Humidity ≤ 85%
Ingress protection IP30
Enclosure Cooling Convection
Installation Type 19” Rack
Product Description
The ComFlex series Distributed Antenna System is an RF over fiber solution that enhances a wireless network’s
coverage by extending cellular services from existing cell sites to an indoor environment. The system consists of the
Master Unit (MU) and Remote Unit (RU). The MU includes the MU Rack, Power Supply Unit (PSU), Fiber Optical
Unit (FOU) and RF Unit (RFU). With a modular design, it can support up to 8 independent RF inputs and 8 Remote
Units. The Remote Unit is designed with a compact and slim form factor for easy installation; it is an integrated
design which supports 3 independent bands, 1800MH, 2100MHz and 2600MHz.
This solution is an effective point-to-multipoint distributed antenna system that provides effective coverage
enhancement. The Comba Tri-Band DAS offers service providers an optimal solution for multiple applications from a
single building to a campus, mega mall, or sports arena and beyond.
SISO System …
(optional)
BTS DAS Tray
MIMO System
HRU 1A HRU 1B HRU 4A HRU 4B
BTS 1 (optional)
DAS Tray
…
BTS 2
Electrical
1800MHz 2100MHz 2600MHz
Uplink Frequency Range 1710-1785 1920-1980 2500-2570
MHz
Downlink Frequency Range 1805-1880 2110-2170 2620-2690
Operating Bandwidth MHz 75 60 70
Uplink Output Power dBm -20 -20 -20
Downlink Output Power dBm 43 43 43
Uplink Maximum gain dB 33
Downlink Maximum gain dB 35
ATT Adjustable Range (1dB step) dB MU: 0-40; RU: 0-30
Pass Band Ripple (p-p) dB ≤6 ≤6 ≤6
Spurious emission 3GPP TS 36.106 3GPP TS 25.106 3GPP TS 36.106
Uplink Noise Figure at Maximum Gain dB ≤5
System Delay sec ≤2
VSWR ≤ 1.5
Max. Input RF Power at Master Unit dBm 30
Mechanical---MU
Chassis 178 x 482 x 360
Fiber Optical Unit 37 x 185 x 299
Dimensions, H x W x D mm
Per RF Unit 103 x 46 x 259
Power Supply Unit 140 x 63 x 400
Chassis 12
Fiber Optical Unit 2
Weight (approx.) kg
Per RF Unit 1
Power Supply Unit 2.5
Power Supply VAC 100-240/50-60Hz
Power Consumption (approx.) W 85
RF Connectors N-Female
Fiber Connectors SC/APC
o
Operating Temperature C 0 to +40
Operating Humidity ≤ 85%
Ingress protection IP30
Enclosure Cooling Convection
Installation Type 19” Rack
Product Description
The ComFlex series Distributed Antenna System is an RF over fiber solution that enhances a wireless network’s
coverage by extending cellular services from existing cell sites to an indoor environment. The system consists of the
Master Unit (MU) and high power Remote Unit (RU). The MU includes the Chassis, Power Supply Unit (PSU), Fibre
Optical Unit (FOU) and RF Unit (RFU). With a modular design, it can support up to 8 independent RF inputs and 8
Remote Units. The Remote Unit is designed with a compact and slim form factor for easy installation; it is an
integrated design which supports 3 independent bands, 1900MHz, AWS, and AWS MIMO.
This solution is an effective point-to-multipoint distributed antenna system that provides effective coverage
enhancement. The Comba DAS offers service providers an optimal solution for multiple applications from a single
building to a campus, mega mall, or sports arena and beyond.
HRU 1 HRU 4
BTS 1 (optional)
DAS Tray
…
BTS 2
Electrical
1900MHz AWS AWS
Uplink Frequency Range 1850-1910 1710-1755 1710-1755
MHz
Downlink Frequency Range 1930-1990 2110-2155 2110-2155
Operating Bandwidth MHz 60 45 45
Uplink Output Power dBm -20 -20 -20
Downlink Output Power dBm 43/46 43/46 43/46
Uplink Maximum gain dB 33
Downlink Maximum gain dB 35 @ 20W; 38 @ 40W
ATT Adjustable Range(1dB step) dB MU: 0-40; HRU: 0-30
Pass Band Ripple (p-p) dB ≤6 ≤5 ≤5
3GPP TS 25.106 3GPP TS 25.106
Spurious emission 3GPP TS 25.106
3GPP TS 36.106 3GPP TS 36.106
Uplink Noise Figure at Maximum
dB ≤6
Gain
System Delay sec ≤2
VSWR ≤ 1.5
Max. Input RF Power at Master Unit dBm 30
Mechanical---MU
Chassis 178 x 482 x 360
Fiber Optical Unit 37 x 185 x 299
Dimensions, H x W x D mm
Per RF Unit 103 x 46 x 259
Power Supply Unit 140 x 63 x 400
Chassis 12
Fiber Optical Unit 2
Weight (approx.) kg
Per RF Unit 1
Power Supply Unit 2.5
Power Supply VAC 100-240/50-60Hz
Power Consumption (approx.) W 85
RF Connectors N-Female
Fiber Connectors SC/APC
o
Operating Temperature C 0 to +40
Operating Humidity ≤ 85%
Ingress protection IP30
Enclosure Cooling Convection
Installation Type 19” Rack
Product Description
The ComFlex series Distributed Antenna System is an RF over fiber solution that enhances a wireless network’s
coverage by extending cellular services from existing cell sites to an indoor environment. The system consists of the
Master Unit (MU) and high power Remote Unit (RU). The MU includes the Chassis, Power Supply Unit (PSU), Fibre
Optical Unit (FOU) and RF Unit (RFU). With a modular design, it can support up to 8 independent RF inputs and 8
Remote Units. The Remote Unit is designed with a compact and slim form factor for easy installation; it is an
integrated design which supports 4 independent bands, 850MHz, 1800MHz, 2100MHz and 2600MHz.
This solution is an effective point-to-multipoint distributed antenna system that provides flexible and scalable
solution of multi-band, multi-operator coverage extension applications, such as citywide enhancement, highway,
canyons, campus, underground tunnels, airports, convention centres, etc.
SISO System …
(optional)
BTS DAS Tray
MIMO System
RU 1A RU 1B RU 4A RU 4B
BTS 1 (optional)
DAS Tray
…
BTS 2
Electrical
850MHz 1800MHz 2100MHz 2600MHz
Uplink Frequency Range 824-849 1710-1785 1920-1980 2500-2570
MHz
Downlink Frequency Range 869-894 1805-1880 2110-2170 2620-2690
Operating Bandwidth MHz 25 75 60 70
Uplink Output Power dBm -20 -20 -20 -20
Downlink Output Power dBm 40/43 40/43 40/43 40/43
Uplink Maximum gain dB 32@10W, 33 @20W
Downlink Maximum gain dB 32@10W, 35 @20W
ATT Adjustable Range(1dB
dB MU: 0-40, RU: 0-30
step)
Pass Band Ripple (p-p) dB ≤5 ≤6 ≤6 ≤6
Spurious emission 3GPP TS 25.106 3GPP TS 36.106 3GPP TS 25.106 3GPP TS 36.106
Uplink Noise Figure at
dB ≤6
Maximum Gain
System Delay sec ≤2
VSWR ≤ 1.5
Max. Input RF Power at Master
dBm 30
Unit
MTBF hr >100,000
Mechanical---MU
Chassis 178 x 482 x 360
Fiber Optical Unit 37 x 185 x 299
Dimensions, H x W x D mm
Per RF Unit 103 x 46 x 259
Power Supply Unit 140 x 63 x 400
Chassis 11
Fiber Optical Unit 2
Weight (approx.) kg
Per RF Unit 1
Power Supply Unit 2.5
Power Supply VAC 100-240/50-60Hz
Power Consumption (approx.) W 85
RF Connectors N-Female
Fiber Connectors SC/APC
o
Operating Temperature C 0 to +40
Operating Humidity ≤ 85%
Ingress protection IP30
Enclosure Cooling Convection
Installation Type 19” Rack
Product Description
The ComFlex series Distributed Antenna System is an RF over fiber solution that enhances a wireless network’s
coverage by extending cellular services from existing cell sites to an indoor environment. The system consists of the
Master Unit (MU) and High power Remote Unit (RU). The MU includes the Chassis, Power Supply Unit (PSU), Fibre
Optical Unit (FOU) and RF Unit (RFU). With a modular design, it can support up to 8 independent RF inputs and 8
Remote Units. The Remote Unit is designed with a compact and slim form factor for easy installation; it is an
integrated design which supports 4 independent bands, 850MHz, 1900MHz, AWS and AWS MIMO band.
This solution is an effective point-to-multipoint distributed antenna system that provides effective coverage
enhancement. The Comba DAS offers service providers an optimal solution for multiple applications from a single
building to a campus, mega mall, or sports arena and beyond.
MIMO System
HRU 1 HRU 4
BTS 1 (optional)
DAS Tray
…
BTS 2
Electrical
850MHz 1900MHz AWS AWS
Uplink Frequency Range 824-849 1850-1910 1710-1755 1710-1755
MHz
Downlink Frequency Range 869-894 1930-1990 2110-2155 2110-2155
Operating Bandwidth MHz 25 60 45 45
Uplink Output Power dBm -20 -20 -20 -20
Downlink Output Power dBm 43/46 43/46 43/46 43/46
Uplink Maximum gain dB 33
Downlink Maximum gain dB 35@ 20W, 38@40W
ATT Adjustable Range(1dB
dB MU: 0-40, RU: 0-30
step)
Pass Band Ripple (p-p) dB ≤5 ≤6 ≤5 ≤5
Spurious emission 3GPP TS 25.106 3GPP TS 25.106 3GPP TS 25.106 3GPP TS 25.106
Uplink Noise Figure at
dB ≤6
Maximum Gain
System Delay sec ≤2
VSWR ≤ 1.5
Max. Downlink Input Power dBm 30
Mechanical---MU
Chassis 178 x 482 x 360
Fiber Optical Unit 37 x 185 x 299
Dimensions, H x W x D mm
Per RF Unit 103 x 46 x 259
Power Supply Unit 140 x 63 x 400
Chassis 11
Fiber Optical Unit 2
Weight (approx.) kg
Per RF Unit 1
Power Supply Unit 2.5
Power Supply VAC 100-240/50-60Hz
Power Consumption (approx.) W 85
RF Connectors N-Female
Fiber Connectors SC/APC
o
Operating Temperature C 0 to 40
Operating Humidity ≤ 85%
Ingress protection IP30
Enclosure Cooling Convection
Installation Type 19” Rack
Product Description
The ComFlex series Distributed Antenna System is an RF over fiber solution that enhances a wireless network’s
coverage by extending cellular services from existing cell sites to an indoor environment. The system consists of the
Master Unit (MU) and high power Remote Unit (RU). The MU includes the Chassis, Power Supply Unit (PSU), Fibre
Optical Unit (FOU) and RF Unit (RFU). With a modular design, it can support up to 8 independent RF inputs and 8
Remote Units. The Remote Unit is designed with a compact and slim form factor for easy installation; it is an
integrated design which supports 4 independent bands, 850MHz, 1800MHz, 2100MHz and 2600MHz.
This solution is an effective point-to-multipoint distributed antenna system that provides flexible and scalable
solution of multi-band, multi-operator coverage extension applications, such as citywide enhancement, highway,
canyons, campus, underground tunnels, airports, convention centres, etc.
SISO System …
(optional)
BTS DAS Tray
MIMO System
HRU 1A HRU 1B HRU 4A HRU 4B
BTS 1 (optional)
DAS Tray
…
BTS 2
Electrical
900MHz 1800MHz 2100MHz 2600MHz
Uplink Frequency Range 880-915 1710-1785 1920-1980 2500-2570
MHz
Downlink Frequency Range 925-960 1805-1880 2110-2170 2620-2690
Operating Bandwidth MHz 35 75 60 70
Uplink Output Power dBm -20 -20 -20 -20
Downlink Output Power dBm 46 46 46 43
Uplink Maximum gain dB 38
Downlink Maximum gain dB 38
ATT Adjustable Range(1dB
dB MU: 0-40, RU: 0-30
step)
Pass Band Ripple (p-p) dB ≤5 ≤6 ≤5 ≤5
Spurious emission 3GPP TS 25.106 3GPP TS 36.106 3GPP TS 25.106 3GPP TS 36.106
Uplink Noise Figure at
dB ≤6
Maximum Gain
System Delay sec ≤2
VSWR ≤ 1.5
Max. Input RF Power at
dBm 30
Master Unit
Mechanical---MU
Chassis 178 x 482 x 360
Fiber Optical Unit 37 x 185 x 299
Dimensions, H x W x D mm
Per RF Unit 103 x 46 x 259
Power Supply Unit 140 x 63 x 360
Chassis 11
Fiber Optical Unit 2
Weight (approx.) kg
Per RF Unit 1
Power Supply Unit 2.5
Power Supply VAC 100-240/50-60Hz
Power Consumption (approx.) W 85
RF Connectors N-Female
Fiber Connectors SC/APC
o
Operating Temperature C 0 to +40
Operating Humidity ≤ 85%
Ingress protection IP30
Enclosure Cooling Convection
Installation Type 19” Rack
Product Description
The ComFlex series Distributed Antenna System is an RF over fiber solution that enhances a wireless network’s
coverage by extending cellular services from existing cell sites to an indoor environment. The system consists of the
Master Unit (MU) and high power Remote Unit (RU). The MU includes the Chassis, Power Supply Unit (PSU), Fibre
Optical Unit (FOU) and RF Unit (RFU). With a modular design, it can support up to 8 independent RF inputs and 8
Remote Units. The Remote Unit is designed with a compact form factor for easy installation, and its modular design
is easy for upgrading and maintenance, which supports up to 8 bands including MIMO frequency.
This solution is an effective point-to-multipoint distributed antenna system that provides effective coverage
enhancement. The Comba DAS offers service providers an optimal solution for multiple applications from a single
building to a campus, mega mall, or sports arena and beyond.
SISO System RU 1 RU 8
…
(optional)
BTS DAS Tray
RU 1 RU 4
MIMO System
BTS 1 (optional) …
DAS Tray
BTS 2
Electrical
700 850 900 1800 2100 2300 2600
MHz MHz* MHz* MHz MHz MHz MHz
Uplink Frequency 1710-1785 1920-1980 2300-2400
703-748 824-849 880-915 2500-2570
Range
MHz
Downlink Frequency
758-803 869-894 925-960 1805-1880 2110-2170 2300-2400 2620-2690
Range
Operating Bandwidth MHz 45 25 35 75 60 100 70
Uplink Output Power dBm -30 -30 -30 -30 -30 -30 -30
Downlink Output Power dBm 43 43 43 43 43 43 43
Uplink Maximum gain dB 30
Downlink Maximum
dB 35
gain
ATT Adjustable Range
dB MU: 0-40, RU: 0-30
(1dB step)
Pass Band Ripple (p-p) dB ≤5 ≤5 ≤5 ≤6 ≤6 ≤6 ≤6
3GPP TS 3GPP TS
3GPP TS 3GPP TS 25.106 25.106 3GPP TS 3GPP TS 3GPP TS
Spurious emission
36.106 25.106 3GPP TS 3GPP TS 25.106 36.106 36.106
36.106 36.106
Uplink Noise Figure at
dB ≤5
Maximum Gain
System Delay sec ≤2
VSWR ≤ 1.5
Max. Downlink Input
dBm 30
Power
* Note: 850MHz and 900MHz can’t be used together unless there is at least 5MHz frequency interval.
Mechanical---RU
CMU 528 x 298 x 251
Dimensions, H x W x D Per RF Unit mm 528 x 290 x 152
Mounting Rack 602 x 820 x 80
CMU 25
Weight (approx.) Per RF Unit kg 15
Mounting Rack 8
Power Supply AC110/220V VAC 100-240/50-60Hz
Power Consumption (approx.) W 1200 (8 bands)
RF Connectors N-Female
Fiber Connectors FC/APC
o
Operating Temperature C -40 to +55
Operating Humidity ≤ 95%
Ingress protection IP65
Enclosure Cooling Convection
Installation Type Wall
Product Description
The ComFlex series Distributed Antenna System is an RF over fiber solution that enhances a wireless network’s
coverage by extending cellular services from existing cell sites to an indoor environment. The system consists of the
Master Unit (MU) and high power Remote Unit (RU). The MU includes the Chassis, Power Supply Unit (PSU), Fibre
Optical Unit (FOU) and RF Unit (RFU). With a modular design, it can support up to 8 independent RF inputs and 8
Remote Units. The Remote Unit is designed with a compact form factor for easy installation, and its modular design
is easy for upgrading and maintenance, which supports up to 8 bands including MIMO frequency.
This solution is an effective point-to-multipoint distributed antenna system that provides effective coverage
enhancement. The Comba DAS offers service providers an optimal solution for multiple applications from a single
building to a campus, mega mall, or sports arena and beyond.
SISO System RU 1 RU 8
…
(optional)
BTS DAS Tray
MIMO System RU 1 RU 4
BTS 1 (optional) …
DAS Tray
BTS 2
Electrical
700 800 850 1800 1900 2100 2600
AWS**
MHz MHz* MHz* MHz** MHz** MHz** MHz
Uplink Frequency 1710-178 1850-191 1920-198
703-748 806-824 824-849 1710-1755 2500-2570
Range 5 0 0
MHz
Downlink Frequency 1805-188 1930-199 2110-217
758-803 851-869 869-894 2110-2155 2620-2690
Range 0 0 0
Operating Bandwidth MHz 45 18 25 75 60 60 45 70
Uplink Output Power dBm -30 -30 -30 -30 -30 -30 -30 -30
Downlink Output
dBm 43 43 43 43 43 43 43 43
Power
Uplink Maximum gain dB 30
Downlink Maximum
dB 35
gain
ATT Adjustable Range
dB MU: 0-40, RU: 0-30
(1dB step)
Pass Band Ripple
dB ≤6 ≤5 ≤5 ≤6 ≤6 ≤6 ≤6 ≤6
(p-p)
3GPP TS 3GPP TS
3GPP TS 3GPP TS 3GPP TS 25.106 3GPP TS 3GPP TS 25.106 3GPP TS
Spurious emission
36.106 25.106 25.106 3GPP TS 36.106 25.106 3GPP TS 36.106
36.106 36.106
Uplink Noise Figure at
dB ≤5
Maximum Gain
System Delay sec ≤2
VSWR ≤ 1.5
Max. Downlink Input
dBm 30
Power
* Note: When 800MHz and 850MHz used together the gain will be 3dB decrease in 800MHz DL and 850MHz UL, and 800MHz output
power will be 40dBm and 850MHz NF will be 8dB.
** Note: 1800MHz, 1900MHz, 2100MHz and AWS band will not be used together due to frequency interference. Suggest 1800+2100 and
1900+AWS band.
Mechanical---RU
CMU 528 x 298 x 251
Dimensions, H x W x D Per RF Unit mm 528 x 290 x 152
Mounting Rack 602 x 820 x 80
CMU 25
Weight (approx.) Per RF Unit kg 15
Mounting Rack 8
Power Supply AC110/220V VAC 100-240/50-60Hz
Power Consumption (approx.) W 1200 (8 bands)
RF Connectors N-Female
Fiber Connectors FC/APC
o
Operating Temperature C -40 to +55
Operating Humidity ≤ 95%
Ingress protection IP65
Enclosure Cooling Convection
Installation Type Wall
Product Description
The ComFlex series Distributed Antenna System is an RF over fiber solution that enhances a wireless network’s
coverage by extending cellular services from existing cell sites to an indoor environment. The system consists of the
Master Unit (MU) and high power Remote Unit (RU). The MU includes the Chassis, Power Supply Unit (PSU), Fibre
Optical Unit (FOU) and RF Unit (RFU). With a modular design, it can support up to 8 independent RF inputs and 8
Remote Units. The Remote Unit is designed with a compact form factor for easy installation, and its modular design is
easy for upgrading and maintenance, which supports up to 8 bands including MIMO frequency.
This solution is an effective point-to-multipoint distributed antenna system that provides effective coverage
enhancement. The Comba DAS offers service providers an optimal solution for multiple applications from a single
building to a campus, mega mall, or sports arena and beyond.
Electrical
800 800 900 1800 1800 2100 2600 2600
MHz MIMO MHz MHz MIMO MHz MHz MIMO
Uplink Frequency Range 832-862 832-862 880-915 1710-1785 1710-1785 1920-1980 2500-2570 2500-2570
Downlink Frequency MHz
791-821 791-821 925-960 1805-1880 1805-1880 2110-2170 2620-2690 2620-2690
Range
Operating Bandwidth MHz 30 30 35 75 75 60 70 70
Downlink Output Power dBm 43 43 43 43 43 43 43 43
Uplink Maximum gain dB 30
Downlink Maximum gain dB 35
ATT Adjustable Range
dB MU: 0-40, RU: 0-30
(1dB step)
Pass Band Ripple (p-p) dB ≤5 ≤5 ≤5 ≤6 ≤6 ≤6 ≤6 ≤6
3GPP TS 3GPP TS 25.106 3GPP TS
Spurious emission 3GPP TS 36.106 3GPP TS 36.106
25.106 3GPP TS 36.106 25.106
Uplink Noise Figure at
dB ≤5
Maximum Gain
System Delay sec ≤2
VSWR ≤ 1.5
Max. Downlink Input
dBm 30
Power
Mechanical---MU
Chassis 178 x 482 x 360
Fiber Optical Unit 37 x 185 x 299
Dimensions, H x W x D mm
Per RF Unit 103 x 46 x 259
Power Supply Unit 140 x 63 x 400
Chassis 12
Fiber Optical Unit 2
Weight (approx.) kg
Per RF Unit 1
Power Supply Unit 2.5
Power Supply VAC 100-240/50-60Hz
Power Consumption (approx.) W 85
RF Connectors N-Female
Fiber Connectors SC/APC
o
Operating Temperature C 0 to +40
Operating Humidity ≤ 85%
Ingress protection IP30
Enclosure Cooling Convection
Installation Type 19” Rack
Product Description
The ComFlex series Distributed Antenna System is an RF over fiber solution that enhances a wireless network’s
coverage by extending cellular services from existing cell sites to an indoor environment. The system consists of the
Master Unit (MU) and high power Remote Unit (RU). The MU includes the Chassis, Power Supply Unit (PSU), Fibre
Optical Unit (FOU) and RF Unit (RFU). With a modular design, it can support up to 8 independent RF inputs and 8
Remote Units. The Remote Unit is designed with a compact form factor for easy installation, and its modular design
is easy for upgrading and maintenance which supports 8 independent bands, 900MHz, 1800MHz, 2100MHz,
2600MHz, 900MIMO, 1800MIMO, 2100MIMO and 2600MIMO.
This solution is an effective point-to-multipoint distributed antenna system that provides effective coverage
enhancement. The Comba DAS offers service providers an optimal solution for multiple applications from a single
building to a campus, mega mall, or sports arena and beyond.
RU 1 RU 4
...
Electrical
900 900 1800 1800 2100 2100 2600 2600
MHz MIMO MHz MIMO MHz MIMO MHz MIMO
Frequency Uplink 832-862 832-862 1710-1785 1710-1785 1920-1980 1920-1980 2500-2570 2500-2570
MHz
Range Downlink 791-821 791-821 1805-1880 1805-1880 2110-2170 2110-2170 2620-2690 2620-2690
Operating Bandwidth MHz 30 30 75 75 60 60 70 70
Uplink Output Power dBm -30 -30 -30 -30 -30 -30 -30 -30
Downlink Output Power dBm 43 43 43 43 43 43 43 43
Uplink Maximum gain dB 30
Downlink Maximum gain dB 35
ATT Adjustable Range
dB MU: 0-40, RU: 0-30
(1dB step)
Pass Band Ripple (p-p) dB ≤5 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5
3GPP TS 25.106
Spurious emission 3GPP TS 36.106 3GPP TS 25.106 3GPP TS 36.106
3GPP TS 36.106
Uplink Noise Figure at
dB ≤5
Maximum Gain
System Delay sec ≤2
VSWR ≤ 1.5
Max. Downlink Input
dBm 30
Power
Mechanical Specifications---RU
Total Dimension 602 x 300 x 873
CMU 528 x 298 x 251
Dimensions, H x W x D mm
RF Unit 528 x 290 x 152 *4
Mounting Rack 602 x 30 x 873
Total Weight 95
CMU 27
Weight (approx.) kg
RF Unit 15 *4
Mounting Rack 8
Power Supply AC110/220V VAC 100-240/50-60Hz
Power Consumption (approx.) W 1200
RF Connectors N-Female
Fiber Connectors FC/APC
o
Operating Temperature C -40 to +55
Operating Humidity ≤ 95%
Ingress protection IP65
Enclosure Cooling Convection
Installation Type Wall
Product Description
The ComFlex series Distributed Antenna System is an RF over fibre solution that enhances a wireless network’s
coverage by extending cellular services from existing cell sites to an indoor environment. The system consists of the
Active Conditioning Unit (ACU), Optical control Unit (OCU), Combiner and Remote Unit (RU). The ACU includes the
Chassis, Power Supply Unit (PSU) and RF Unit (RFU). With a modular design, it can support up to 8 independent
RF inputs and 8 Remote Units. The Remote Unit is designed with a compact and slim form factor for easy
installation; it is an integrated design which supports 3 independent bands.
This solution is an effective point-to-multipoint distributed antenna system that provides effective coverage
enhancement. The Comba DAS offers service providers an optimal solution for multiple applications from a single
building to a campus, mega mall, or sports arena and beyond.
ACU
BTS
…
Combiner
OCU
Electrical
1900MHz AWS 2600
Uplink 1850-1910 1710-1755 2500-2570
Frequency Range MHz
Downlink 1930-1990 2110-2155 2620-2690
Operating Bandwidth MHz 65 45 70
Downlink Output Power dBm 43 43 43
Uplink Maximum gain dB -3
Downlink Maximum gain dB -3 @ 46dBm input
ATT Adjustable Range (1dB step) dB ACU: 0-70, RU: 0-30
Pass Band Ripple (p-p) dB ≤6 ≤5 ≤6
3GPP TS 25.106 3GPP TS 25.106
Spurious emission 3GPP TS 36.106
3GPP TS 36.106 3GPP TS 36.106
Uplink Noise Figure at Maximum
dB ≤5
Gain
System Delay sec ≤2
VSWR ≤ 1.5
Max. Downlink Input Power per
dBm 50
RFU of ACU
Mechanical---ACU
Dimensions, H x W x D mm 220 x 482.5 x 450
Weight (approx.) kg 50 (with 8 RFUs)
VAC 100-240
Power Supply
VDC -48
Power Consumption (approx.) W 180 (with 8 RFUs)
RF Connectors Input: Din, duplex; Output: QMA, simplex
o
Operating Temperature C 0 to +45
Operating Humidity ≤ 85%
Ingress Protection IP30
Enclosure Cooling Fan
Installation Type 19” Rack
Mechanical---OCU
Dimensions, H x W x D mm 44 x 485 x 450
Weight (approx.) kg 8 (with 2 FOUs)
Power Supply DC +28V (from ACU) @ 0.7A
Power Consumption (approx.) W 30
RF Connectors QMA-Female, simplex
Fiber Connectors SC/APC
o
Operating Temperature C 0 to +45
Operating Humidity ≤ 85%
Ingress Protection IP30
Enclosure Cooling Convection
Installation Type 19” Rack
Mechanical Specifications---RU
10W 20W
Dimensions, H x W x D mm 1270 x 236 x 200
Weight (approx.) kg 49
Power Supply VAC 100-240/47-36Hz
Power Consumption (approx.) W 850 1100
RF Connectors 3 x 7/16 DIN-F
Fiber Connectors SC/APC
o
Operating Temperature C -40 to +55
Operating Humidity ≤ 95%
Ingress protection IP65
Enclosure Cooling Fan
Installation Type Wall/Pole
Product Description
The ComFlex series Distributed Antenna System is an RF over fibre solution that enhances a wireless network’s
coverage by extending cellular services from existing cell sites to an indoor environment. The system consists of the
Active Conditioning Unit (ACU), Optical control Unit (OCU), Combiner and Remote Unit (RU). The ACU includes the
Chassis, Power Supply Unit (PSU) and RF Unit (RFU). With a modular design, it can support up to 8 independent
RF inputs and 8 Remote Units. The Remote Unit is designed with a compact form factor for easy installation, and its
modular design is easy for upgrading and maintenance which supports 3 independent bands, 850MIHz, 1900MHz
and AWS.
This solution is an effective point-to-multipoint distributed antenna system that provides effective coverage
enhancement. The Comba DAS offers service providers an optimal solution for multiple applications from a single
building to a campus, mega mall, or sports arena and beyond.
ACU
BTS RU 1 RU 8
Combiner
OCU
Electrical
850MHz 1900MHz AWS
Uplink 824-849 1850-1910 1710-1755
Frequency Range MHz
Downlink 869-894 1930-1990 2110-2155
Operating Bandwidth MHz 25 60 45
Downlink Output Power dBm 43 43 43
Uplink Maximum gain dB -3 @ 46dBm input
Downlink Maximum gain dB -3 @ 46dBm input
ATT Adjustable Range(1dB step) dB ACU: 0-70, RU: 0-30
Pass Band Ripple (p-p) dB ≤5 ≤6 ≤6
3GPP TS 25.106 3GPP TS 25.106 3GPP TS 25.106
Spurious emission
3GPP TS 36.106 3GPP TS 36.106 3GPP TS 36.106
Uplink Noise Figure at Maximum
dB ≤5
Gain
System Delay sec ≤2
VSWR ≤ 1.5
Max. Downlink Input Power per
dBm 50
RFU of ACU
Mechanical---ACU
Dimensions, H x W x D mm 220 x 482.5 x 450
Weight (approx.) kg 50 (with 8 RFUs)
VAC 100-240
Power Supply
VDC -48
Power Consumption (approx.) W 180 (with 8 RFUs)
RF Connectors Input: Din, duplex; Output: QMA, simplex
o
Operating Temperature C 0 to +45
Operating Humidity ≤ 85%
Ingress Protection IP30
Enclosure Cooling Fan
Installation Type 19” Rack
Mechanical---OCU
Dimensions, H x W x D mm 44 x 485 x 450
Weight (approx.) kg 8 (with 2 FOUs)
Power Supply DC +28V (from ACU) @ 0.7A
Power Consumption (approx.) W 30
RF Connectors QMA-Female, simplex
Fiber Connectors SC/APC
o
Operating Temperature C 0 to +45
Operating Humidity ≤ 85%
Ingress Protection IP30
Enclosure Cooling Convection
Installation Type 19” Rack
Mechanical---RU
CMU 528 x 251 x 298
Dimensions, H x W x D RF Unit mm 528 x 152 x 290*2
Mounting Rack 602 x 820 x 30
CMU 30
Weight (approx.) RF Unit kg 20*2
Mounting Rack 8
Power Supply AC110/220V VAC 100-240/50-60Hz
Power Consumption (approx.) W 500
RF Connectors N-Female, duplex
Fiber Connectors FC/APC
o
Operating Temperature C -40 to +55
Operating Humidity ≤ 95%
Ingress protection IP65
Enclosure Cooling Convection
Installation Type Wall
Product Description
The ComFlex series Distributed Antenna System is an RF over fibre solution that enhances a wireless network’s
coverage by extending cellular services from existing cell sites to an indoor environment. The system consists of the
Active Conditioning Unit (ACU), Optical control Unit (OCU), Combiner and Remote Unit (RU). The ACU includes the
Chassis, Power Supply Unit (PSU) and RF Unit (RFU). With a modular design, it can support up to 8 independent
RF inputs and 8 Remote Units. The Remote Unit is designed with a compact form factor for easy installation, and its
modular design is easy for upgrading and maintenance.
This solution is an effective point-to-multipoint distributed antenna system that provides effective coverage
enhancement. The Comba DAS offers service providers an optimal solution for multiple applications from a single
building to a campus, mega mall, or sports arena and beyond.
Electrical
900MHz 1800MHz 2100MHz 2600MHz
Uplink Frequency Range 880-915 1710-1785 1920-1980 2500-2570
MHz
Downlink Frequency Range 925-960 1805-1880 2110-2170 2620-2690
Operating Bandwidth MHz 35 75 60 70
Downlink Output Power dBm 43 43 43 43
Uplink Maximum gain dB -3
Downlink Maximum gain
dB -3
(@46dBm input)
ATT Adjustable Range (1dB
dB ACU: 0-70, RU: 0-30
step)
Pass Band Ripple (p-p) dB ≤5 ≤6 ≤6 ≤6
3GPP TS 25.106
Spurious emission 3GPP TS 25.106 3GPP TS 25.106 3GPP TS 36.106
3GPP TS 36.106
Uplink Noise Figure at
dB ≤5
Maximum Gain
System Delay sec ≤2
VSWR ≤ 1.5
Max. Downlink Input Power dBm 50
Mechanical---ACU
Dimensions, H x W x D mm 220 x 482.5 x 450
Weight (approx.) kg 50 (with 8 RFUs)
VAC 100-240
Power Supply
VDC -48
Power Consumption (approx.) W 180 (with 8 RFUs)
RF Connectors Input: Din, duplex; Output: QMA, simplex
o
Operating Temperature C 0 to +45
Operating Humidity ≤ 85%
Ingress Protection IP30
Enclosure Cooling Fan
Installation Type 19” Rack
Mechanical---OCU
Dimensions, H x W x D mm 44 x 485 x 450
Weight (approx.) kg 8 (with 2 FOUs)
Power Supply DC +28V (from ACU) @ 0.7A
Power Consumption (approx.) W 20
RF Connectors QMA-Female, simplex
Fiber Connectors SC/APC
o
Operating Temperature C 0 to +45
Operating Humidity ≤ 85%
Ingress Protection IP30
Enclosure Cooling Convection
Installation Type 19” Rack
Mechanical---RU
Total Dimension 602 x 555 x 300
CMU 528 x 298 x 251
Dimensions, H x W x D mm
RF Unit 528 x 290 x 152 *2
Mounting Rack 602 x 555 x 30
Total Weight 63
CMU 25
Weight (approx.) kg
RF Unit 15 *2
Mounting Rack 8
Power Supply AC110/220V VAC 100-240/50-60Hz
Power Consumption (approx.) W 650
RF Connectors N-Female, duplex
Fiber Connectors FC/APC
o
Operating Temperature C -40 to +55
Operating Humidity ≤ 95%
Ingress protection IP65
Enclosure Cooling Convection
Installation Type Wall
Product Description
The ComFlex series Distributed Antenna System is an RF over fibre solution that enhances a wireless network’s
coverage by extending cellular services from existing cell sites to an indoor environment. The system consists of the
Active Conditioning Unit (ACU), Optical control Unit (OCU), Combiner and Remote Unit (RU). The ACU includes the
Chassis, Power Supply Unit (PSU) and RF Unit (RFU). With a modular design, it can support up to 8 independent RF
inputs and 8 Remote Units. The Remote Unit is designed with a compact form factor for easy installation, and its
modular design is easy for upgrading and maintenance.
This solution is an effective point-to-multipoint distributed antenna system that provides effective coverage
enhancement. The Comba DAS offers service providers an optimal solution for multiple applications from a single
building to a campus, mega mall, or sports arena and beyond.
Electrical
800 800 900 1800 1800 2100 2600 2600
MHz MIMO MHz MHz MIMO MHz MHz MIMO
Uplink Frequency 1710-178 1710-178 1920-198 2500-257
832-862 832-862 880-915 2500-2570
Range 5 5 0 0
MHz
Downlink Frequency 1805-188 1805-188 2110-217 2620-269
791-821 791-821 925-960 2620-2690
Range 0 0 0 0
Operating Bandwidth MHz 30 30 35 75 75 60 70 70
Downlink Output Power dBm 43 43 43 43 43 43 43 43
Uplink Maximum gain dB -3
Downlink Maximum gain
dB -3
(@46dBm input)
ATT Adjustable Range
dB ACU: 0-70, RU: 0-30
(1dB step)
Pass Band Ripple (p-p) dB ≤5 ≤5 ≤5 ≤6 ≤6 ≤6 ≤6 ≤6
3GPP TS 3GPP TS 25.106 3GPP TS
Spurious emission 3GPP TS 36.106 3GPP TS 36.106
25.106 3GPP TS 36.106 25.106
Uplink Noise Figure at
dB ≤5
Maximum Gain
System Delay sec ≤2
VSWR ≤ 1.5
Max. Downlink Input
dBm 50
Power per RFU of ACU
Mechanical---ACU
Dimensions, H x W x D mm 220 x 482.5 x 450
Weight (approx.) kg 50 (with 8 RFUs)
VAC 100-240
Power Supply
VDC -48
Power Consumption (approx.) W 180 (with 8 RFUs)
RF Connectors Input: Din, duplex; Output: QMA, simplex
o
Operating Temperature C 0 to +45
Operating Humidity ≤ 85%
Ingress Protection IP30
Enclosure Cooling Fan
Installation Type 19” Rack
Mechanical---OCU
Dimensions, H x W x D mm 44 x 485 x 450
Weight (approx.) kg 8 (with 2 FOUs)
Power Supply DC +28V (from ACU) @ 0.7A
Power Consumption (approx.) W 20
RF Connectors QMA-Female, simplex
Fiber Connectors SC/APC
o
Operating Temperature C 0 to +45
Operating Humidity ≤ 85%
Ingress Protection IP30
Enclosure Cooling Convection
Installation Type 19” Rack
Mechanical---RU
Total Dimension 602 x 300 x 873
CMU 528 x 298 x 251
Dimensions, H x W x D mm
RF Unit 528 x 290 x 152 *4
Mounting Rack 602 x 820 x 30
Total Weight 93
CMU 25
Weight (approx.) kg
RF Unit 15 *4
Mounting Rack 8
Power Supply AC110/220V VAC 100-240/50-60Hz
Power Consumption (approx.) W 1200
RF Connectors N-Female, duplex
Fiber Connectors FC/APC
o
Operating Temperature C -40 to +55
Operating Humidity ≤ 95%
Ingress protection IP65
Enclosure Cooling Convection
Installation Type Wall
LNA1 PA1
Mobile
Donor Ant
Ant Integrated Frequency
DT selective module MT
Mobile
OMT
Computer with
Data card
OMC
External
OMT Power
Outline Drawing
300 164
RUN
ALM
MODEM
430
AC 100V-240V
50/60Hz AC OUT
RS-485 EXT_ALM MODEM ANT
DT MT
DL LNA DL PA
Digital Frequency
Selective Module
UL PA UL LNA
BTS
Mobile
RS485
DT MT
OMT
Wireless
Modem
OMC
DL LNA DL PA
Digital Frequency
Selective Module
UL PA UL LNA
Outline Drawing
440 355
408
Dual band
433
Tri-band
Specifications-1900MHz
Electrical 5W 10W
Frequency Range, Uplink MHz 1850-1910
Frequency Range, Downlink MHz 1930-1990
Operating Bandwidth Per Sub-band 0.2-25
Number of Sub-bands 4
Total Output Power, Uplink dBm 30
Total Output Power, Downlink dBm 37 40
Maximum System Gain 90
Gain Adjustment Range (1dB step) dB 0-30
Pass Band Ripple, p-p dB 6
Uplink Noise Figure dB 5
System Group Delay sec 6.5
±600kHz dB ≥ 45
Out-of-Band Rejection@ GSM
±1MHz dB ≥ 60
Intermodulation@ GSM dBc ≥ 40
Absolute Maximum RF Input Power dBm -10
Input VSWR 1.5
Impedance 50
Note: Typical specifications at room temperature
Specifications-1800MHz
Electrical 5W 10W
Frequency Range, Uplink MHz 1710-1785
Frequency Range, Downlink MHz 1805-1880
Operating Bandwidth Per Sub-band MHz 0.2-25
Number of Sub-bands 4
Total Output Power, Uplink dBm 30
Total Output Power, Downlink dBm 37 40
Maximum System Gain 90
Gain Adjustment Range (1dB step) dB 0-30
Pass Band Ripple at FBW, p-p dB 5
Uplink Noise Figure dB 5
System Group Delay sec 6.5
Spurious Emission Mask
EVM Compliance with ETSI EN 301 908-15*
Out of Band Gain
±600kHz dB ≥ 45
Out-of-Band Rejection@ GSM
±1MHz dB ≥ 60
Intermodulation@ GSM dBc ≥ 40
Absolute Maximum RF Input Power dBm -10
Input VSWR 1.5
Impedance 50
Note: Typical specifications at room temperature,
*: Compliant to LTE standard @ UL 23dBm.
Specifications-2100MHz
Electrical 5W 10W
Frequency Range, Uplink MHz 1920-1980
Frequency Range, Downlink MHz 2110-2170
Operating Bandwidth Per Sub-band 3-20*
Number of Sub-bands 4
Instantaneous Bandwidth MHz 30
Total Output Power, Uplink dBm 23
Total Output Power, Downlink dBm 37 40
Maximum System Gain 90
Gain Adjustment Range (1dB step) dB 0-30
Uplink Noise Figure dB 5
System Group Delay sec 6.5
Spurious Emission Mask
Compliance with 3GPP TS 25 106
EVM
Compliance with 3GPP TS 36 106
Out-of-Band Gain
Absolute Maximum RF Input Power dBm -10
Input VSWR 1.5
Impedance 50
Note: Typical specifications at room temperature
*: UMTS max bandwidth is 15MHz, LTE max bandwidth is 20MHz
Specifications-2100MHz
Electrical 5W 10W
Frequency Range, Uplink MHz 1920-1980
Frequency Range, Downlink MHz 2110-2170
Operating Bandwidth Per Sub-band 3-20*
Number of Sub-bands 4
Instantaneous Bandwidth MHz 30
Total Output Power, Uplink dBm 23
Total Output Power, Downlink dBm 37 40
Maximum System Gain 90
Gain Adjustment Range (1dB step) dB 0-30
Uplink Noise Figure dB 5
System Group Delay sec 6.5
Spurious Emission Mask
Compliance with 3GPP TS 25 106
EVM
Compliance with 3GPP TS 36 106
Out-of-Band Gain
Absolute Maximum RF Input Power dBm -10
Input VSWR 1.5
Impedance 50
Note: Typical specifications at room temperature
*: UMTS max bandwidth is 15MHz, LTE max bandwidth is 20MHz
Specifications-1800MHz
Electrical 5W 10W
Frequency Range, Uplink MHz 1710-1785
Frequency Range, Downlink MHz 1805-1880
Operating Bandwidth Per Sub-band MHz 0.2-25
Number of Sub-bands 4
Total Output Power, Uplink dBm 30
Total Output Power, Downlink dBm 37 40
Maximum System Gain 90
Gain Adjustment Range (1dB step) dB 0-30
Pass Band Ripple at FBW, p-p dB 5
Uplink Noise Figure dB 5
System Group Delay sec 6.5
Spurious Emission Mask
EVM Compliance with ETSI EN 301 908-15*
Out of Band Gain
±600kHz dB ≥ 45
Out-of-Band Rejection@ GSM
±1MHz dB ≥ 60
Intermodulation@ GSM dBc ≥ 40
Absolute Maximum RF Input Power dBm -10
Input VSWR 1.5
Impedance 50
Note: Typical specifications at room temperature, *: Compliant to LTE standard @ UL 23dBm.
Specifications
Mechanical 5W 10W
Dimensions, H x W x D mm 440×408×355
Weight (approx.) kg 45
Power Supply 100-240/47-63Hz
Power Consumption (approx.) W 420 480
Power Up Waiting Time (approx.) sec 180
MCU Battery Backup Time (approx.) hr 2
Enclosure Cooling Convection
Equipment N-Female
RF Connectors
Combiner (Option) Din-Female
Operating Temperature C -33 to +55
Operating Humidity 95%
Environmental Class IP65
MTBF hr ≥ 50,000
Features
Utilizing the latest Pre-distortion MCPA technologies, up to 20W Downlink Power Output
in a compact chassis (20L).
2W/5W/10W/20W total output power.
Automatic Digital gain control and Antenna Feedback Cancellation (AFC) feature
that can reduce the isolation requirement up to 30dB.
Support up to 4 WCDMA channels with independent ON/OFF switch.
Integrated wireless modem for remote configuration, monitoring and control.
Offline isolation detection for easy commissioning.
Internal backup battery keeps the alarm unit running for up to two hours after power failure.
Compatible to Comba generic OMT and CMS platform.
Designed for all weather outdoor installation – waterproof, damp-proof and omni-sealed (IP65).
Can be configured as Master Unit (MU) or Slave Unit (SU) in a centralized monitoring system.
LNA1 PA1
Mobile
Donor Ant
Ant Integrated Frequency
DT selective module MT
Mobile
OMT
Computer with
Data card
OMC
External
OMT Power
Features
Support 5/10/15/20MHz different bandwidth LTE carrier
Power Output software adjustable, up to 20W Downlink Power Output.
Automatic Digital gain control and Antenna Feedback Cancellation (AFC) feature
that can reduce the isolation requirement up to 30dB.
Integrated WCDMA wireless modem for remote configuration, monitoring and control.
Offline isolation detection for easy commissioning.
Compatible to Comba generic OMT and CMS platform.
Designed for all weather outdoor installation – waterproof, damp-proof and omni-sealed (IP65).
LNA1 PA1
Mobile
Donor Ant
Ant Integrated Frequency
DT selective module MT
Mobile
OMT
Computer with
Data card
OMC
External
OMT Power
Features
Support 5/10/15/20MHz different bandwidth LTE carrier
Power Output software adjustable, up to 20W Downlink Power Output.
Automatic Digital gain control and Antenna Feedback Cancellation (AFC) feature
that can reduce the isolation requirement up to 30dB.
Integrated WCDMA wireless modem for remote configuration, monitoring and control.
Offline isolation detection for easy commissioning.
Compatible to Comba generic OMT and CMS platform.
Designed for all weather outdoor installation – waterproof, damp-proof and omni-sealed (IP65).
LNA1 PA1
Mobile
Donor Ant
Ant Integrated Frequency
DT selective module MT
Mobile
OMT
Computer with
Data card
OMC
External
OMT Power
Outline Drawing
300 164
RUN
ALM
MODEM
430
AC 100V-240V
50/60Hz AC OUT
RS-485 EXT_ALM MODEM ANT
DT MT
Features
Support 5/10/15/20MHz different bandwidth LTE carrier
Power Output software adjustable, up to 20W Downlink Power Output.
Automatic Digital gain control and Antenna Feedback Cancellation (AFC) feature
that can reduce the isolation requirement up to 30dB.
Integrated WCDMA wireless modem for remote configuration, monitoring and control.
Offline isolation detection for easy commissioning.
Compatible to Comba generic OMT and CMS platform.
Designed for all weather outdoor installation – waterproof, damp-proof and omni-sealed (IP65).
LNA1 PA1
Mobile
Donor Ant
Ant Integrated Frequency
DT selective module MT
Mobile
OMT
Computer with
Data card
OMC
External
OMT Power
Features
Up to 12 GSM Channels
Digitalized Antenna Feedback Cancellation (AFC) function to reduce
the antenna isolation requirement up to 30dB.
Dynamic Uplink Noise Control (UNC) function to reduce Uplink Interference by
automatically switch off the corresponding carriers when no traffic.
5W/10W Downlink Output Power utilizing ultra Linear PA, supports GSM, GPRS and EDGE.
Integrated wireless modem for remote configuration, monitoring and control.
Internal backup battery keeps the alarm unit running for up to two hours after power failure.
Compatible to Comba generic OMT and CMS platform.
Designed for all weather outdoor installation – waterproof, damp-proof and omni-sealed (IP65).
LNA1 PA1
Mobile
Donor Ant
Ant Integrated Frequency
DT selective module MT
Mobile
OMT
Computer with
Data card
OMC
External
OMT Power
Outline Drawing
420
330
182
227
Features
Dual-band configuration supports 700MHz and 800MHz public safety bands.
Each band supports up to 32 channels.
2W output power for each band.
Channelized Auto Gain Control (AGC).
Channelized uplink squelch supported.
Web based GUI for intelligent configuration, SNMP supported.
Built-in mandatory isolation test to prevent BDA oscillation.
NFPA compliant dry contact alarms, NEMA 4 enclosure.
Specifications
Electrical 700MHz 800MHz
Frequency Range, Uplink MHz 799-805 806-824
Frequency Range, Downlink MHz 769-775 851-869
Channel Bandwidth KHz 12.5/25 12.5/25
Number of Channels 32 32
Total Output Power, Uplink dBm 25
Total Output Power, Downlink dBm 33 33
Maximum System Gain dB 90 90
Gain Adjustment Range (1dB step) dB 0-30 0-30
Pass Band Ripple, p-p dB 5 5
Uplink Noise Figure dB 5 5
System Group Delay sec 10-35 10-35
Intermodulation dBm -13 -13
at 50KHz dBc ≥ 20 ≥ 20
Out-of-Band
at 70KHz dBc ≥ 40 ≥ 40
Suppression( Delay :35sec)
at 1MHz dBc ≥ 60 ≥ 60
9kHz to 1GHz dBm
Spurious FCC Compliance FCC Compliance
1GHz to 12.75GHz dBm
Absolute Maximum RF Input Power dBm -10 -10
Input VSWR 1.5 1.5
Impedance 50 50
Mechanical
Dimensions, H x W x D mm(in) 530 x 390 x 210 (20.9 x 15.4 x 8.3)
Weight (approx.) Kg(lb) 23 (50.7)
Power Supply VAC 100-240/47-63Hz
Power Consumption Single band W 60 Single band
(approx.) Dual bands W 120 Dual bands
Power Up Waiting Time (approx.) sec 180
Enclosure Cooling Convection
RF Connectors N-Female
o
Operating Temperature C(oF) -33 to +60 (-27 to +140)
Operating Humidity 95%
Environmental Class NEMA 4
Note: Typical specifications at room temperature,
210 (8.3)
DL
(6.1)
155
OMT LAN DT RUN ALM MT UL
390 (15.4)
480 (18.9)
530 (20.9)
Part Numbers
Product Type P/N
Single band 700MHz RX7W22-07-H32V0P33A92
Single band 800MHz RX7W22-08-H32V0P33A92
Dual band 700/800MHz RX7W22-78-H32V0P33A92
700MHz license RX7W22-L7-H32V0P33A92
800MHz license RX7W22-L8-H32V0P33A92
LNA1 PA1
Mobile
Donor Ant
Ant Integrated Frequency
DT selective module MT
Mobile
OMC
External
OMT Power
Specifications-model 1
Electrical Band1 Band2
Operating Frequency (MHz) 806-960 1710-2170
Insert Loss (dB) ≤ 0.8 ≤1
VSWR ≤ 1.5 ≤ 1.5
Note: Typical specification at room temperature;
Specifications-model 2
Electrical Band1 Band2
Operating Frequency (MHz) 1710-1880 1920-2170
Insert Loss (dB) ≤ 1.1 ≤ 1.1
VSWR ≤ 1.5 ≤ 1.5
Note: Typical specification at room temperature;
Mechanical
Dimensions, H x W x D (mm) 210 x 338 x 71
Weight (approx.) (kg) 4.6
RF Connectors N-Female
Operating Temperature (C) -33 to +55
Operating Humidity 95%
Environmental Class IP65
102
338
71
210
Combiner
Wall
Master Unit
Slave Unit
Combiner
Product Description
mBDA is a wireless enhanced solution where high-quality voice or high-speed data service is not available between
a mobile and a base station. mBDA is ideal for the first phase of the network rollout and for any subsequent phase
where cost, coverage, and quality need to be optimized.
mBDA offers a modular, robust design that is easy to install, manage and upgrade. It supports three individually
adjustable sub-bands for flexibility and high RF performance, supports multi-carrier and multi-band operation.
Remote configuration and surveillance is possible through Comba’s remote control and monitoring system via PC or
wireless modem to the OMT/OMC.
Support Technologies
Frequency Range (MHz)
Band Technologies Downlink (DL) Uplink (UL)
700MHz LTE 703-733 758-788
800MHz LTE 791-821 832-862
900MHz GSM/WCDMA 930-960 885-915
1800MHz GSM/LTE 1805-1880 1710-1785
2100MHz WCDMA 2110-2170 1920-1980
2600MHz LTE 2620-2690 2500-2570
WCDMA complies with 3GPP TS 25.106 V9.0.0 (2009-12) table 9.2, 9.3, 9.4 spectrum emission mask.
LTE service is based on 3GPP TS 36.106 V9.0.0 (2009-12)
*WCDMA complies with 3GPP TS 25.106 V9.0.0 (2009-12) table 9.2, 9.3, 9.4 spectrum emission mask.
**LTE service is based on 3GPP TS 36.106 V9.0.0 (2009-12)
1
Intermodulation: WCDMA@3GPP; GSM @Less than-13dBm.
2
Intermodulation: LTE@3GPP; GSM @Less than-13dBm.
Combiner Specifications
Electrical Band1 Band2 Band3 Band4
Operating Frequency (MHz) 791-960 1710-1880 1920-2170 2500-2690
Insert Loss (dB) ≤ 0.8 ≤ 0.9 ≤ 0.9 ≤ 0.8
VSWR ≤ 1.5 ≤ 1.5 ≤ 1.5 ≤ 1.5
Mechanical Specifications
Dimensions, H x W x D, mm (in) System Rack (4 bands) 267 x 482 x 485, (10.5 x 19 x 19.1)
Power and Monitor Unit 220 x 80 x 440, (8.7 x 3.1 x 17.3)
Combiner Unit 220 x 60 x 230, (8.7 x 2.4 x 9.1)
RF Unit 220 x 60 x 350, (8.7 x 2.4 x 13.8)
System Rack (4 bands) 13.2, (29.1)
Power & Monitoring Unit 4, (8.8)
Weight, kg (lb) (approx.)
Combiner Unit 4, (8.8)
RF Card 3.8, (8.4)
Power & Monitoring Unit 15
Power Consumption, W (approx.)
RF Unit 50
Power Supply 100-240VAC/47-63Hz
Power Up Waiting Time (sec) (approx.) 180
Enclosure Cooling Convection or Fan
RF Connectors N Female
Operating Temperature (°C ) -20 to +40
Operating Humidity 10% to 85%
Environmental Class IP30
MTBF ( hr) ≥ 50,000
Mounting 19” Rack
Product Description
mBDA is a wireless enhanced solution where high-quality voice or high-speed data service is not available between
a mobile and a base station. mBDA is ideal for the first phase of the network rollout and for any subsequent phase
where cost, coverage, and quality need to be optimized.
mBDA offers a modular, robust design that is easy to install, manage and upgrade. It supports three individually
adjustable sub-bands for flexibility and high RF performance, supports multi-carrier and multi-band operation.
Remote configuration and surveillance is possible through Comba’s remote control and monitoring system via PC to
the OMT/OMC.
Support Technologies
Frequency Range (MHz)
Band Technologies Downlink (DL) Uplink (UL)
700MHz UpperC LTE 746-757 776-787
700MHz LowerABC LTE 728-746 698-716
850MHz GSM/CDMA/WCDMA/LTE 869-894 824-849
1900MHz GSMCDMA/WCDMA/LTE 1930-1995 1850-1915
AWS WCDMA/LTE 2110-2155 1710-1755
2600MHz LTE 2620-2690 2500-2570
Note:
Operating Bandwidth: GSM/CDMA Max. Bandwidth 25MHz, WCDMA Max. Bandwidth 15MHz, LTE Max. Bandwidth 20MHz.
*WCDMA is based on 3GPP TS 25.106 V9.0.0 (2009-12).
**LTE service is based on 3GPP TS 36.106 V9.0.0 (2009-12)
1
Intermodulation: WCDMA @ 3GPP; GSM/CDMA @ Less than-13dBm.
2
Intermodulation: LTE @ 3GPP; GSM @ Less than-13dBm.
RF specification is without Combiner Unit, Comber Unit insert loss is less than 1.0dB.
Note:
Operating Bandwidth: GSM/CDMA Max. Bandwidth 25MHz, WCDMA Max. Bandwidth 15MHz, LTE Max. Bandwidth 20MHz.
RF specification is without Combiner Unit, Comber Unit insert loss is less than 1.0dB.
Mechanical Specifications
System Rack (4 bands) 267 x 482 x 485, (10.5 x 19 x 19.1)
Power Unit 220 x 80 x 440, (8.7 x 3.1 x 17.3)
Dimensions, H x W x D, mm (in)
Combiner Unit 220 x 60 x 230, (8.7 x 2.4 x 9.1)
RF Unit 220 x 60 x 350, (8.7 x 2.4 x 13.8)
System Rack (4 bands) 13.2, (29.1)
Power and Monitor Unit 4, (8.8)
Weight, kg (lb) (approx.)
Combiner Unit 4, (8.8)
RF Card 3.8, (8.4)
Power and Monitor Unit 15
Power Consumption, W (approx.)
RF Unit 50
Power Supply 100-240VAC/47-63Hz
Power Up Waiting Time (sec) (approx.) 180
Enclosure Cooling Convection or Fan
RF Connectors N-Female/MINI-DIN
Operating Temperature (°C ) -20 to +40
Operating Humidity 10% to 85%
Environmental Class IP30
MTBF ( hr) ≥ 50,000
Mounting 19” Rack
Product Description
mBDA is a wireless enhanced solution where high-quality voice or high-speed data service is not available between
a mobile and a base station. mBDA is ideal for the first phase of the network rollout and for any subsequent phase
where cost, coverage, and quality need to be optimized.
mBDA offers a modular, robust design that is easy to install, manage and upgrade. It supports three individually
adjustable sub-bands for flexibility and high RF performance, supports multi-carrier and multi-band operation.
Remote configuration and surveillance is possible through Comba’s remote control and monitoring system via PC or
wireless modem to the OMT/OMC.
Support Technologies
Frequency Range (MHz)
Band Technologies Downlink (DL) Uplink (UL)
700MHz* LTE 758-788/773-803 703-733/718-748
850MHz GSM/CDMA/WCDMA** 869-894 824-849
1800MHz GSM/LTE 1805-1880 1710-1785
1900MHz GSMCDMA/WCDMA** 1930-1995 1850-1915
AWS WCDMA/LTE 2110-2155 1710-1755
2100MHz WCDMA/LTE** 2110-2170 1920-1980
2600MHz LTE 2620-2690 2500-2570
Note:
Operating Bandwidth: GSM/CDMA Max. Bandwidth 25MHz; WCDMA Max. Bandwidth 15MHz; LTE Max. Bandwidth 20MHz.
1
Intermodulation: WCDMA @ 3GPP; GSM/CDMA @ Less than-13dBm.
2
Intermodulation: LTE @ 3GPP; GSM @ Less than-13dBm.
RF specification is without Combiner Unit, Comber Unit insert loss is less than 1.5dB.
Note:
Operating Bandwidth: GSM/CDMA Max. Bandwidth 25MHz, WCDMA Max. Bandwidth 15MHz, LTE Max. Bandwidth 20MHz.
1
Intermodulation: WCDMA @ 3GPP; GSM/CDMA @ Less than-13dBm
RF specification is without Combiner Unit, Comber Unit insert loss is less than 1.5dB.
Product Description
Fast deployment for small to medium sized Indoor Coverage.
Residential apartments.
Shops, Restaurants, Supermarkets.
Offices, underground car parks and other commercial areas.
Mobile Ant
LNA1 PA1
Band selective
Donor Ant module
Duplexer Duplexer
PA2 LNA2 MT
DT Band selective
module
Mobile
Block Diagram
LNA1 PA1
Mobile
Donor Ant
Ant Integrated Frequency
DT selective module MT
Mobile
Alarm Power
Indicator Main Control Unit Supply
Wireless Modem
Modem
OMC
External
OMT Power
LNA PA
Band selective
module
Duplexer
Duplexer
PA LNA
Band selective LTE MT
LTE DT module
LNA PA
Band selective
WCDMA DT
module WCDMA MT
Duplexer
Duplexer
PA LNA
Band selective
module
Specifications
Electrical 0.02W
Frequency Range, Uplink MHz 1710-1785
Spurious Emissions
3GPP TS 36.106
Input/Output Intermodulation
Impedance 50
LED Indicator Input RSSI, AGC Alarm, Isolation Alarm, Power On, Sleep, Output
Specifications
Electrical 0.02W
Frequency Range, Uplink MHz 1920-1980
Interference Cancellation dB 30
Spurious Emissions
3GPP TS 36.106
Input/Output Intermodulation
Impedance 50
LED Indicator Input RSSI, AGC Alarm, Isolation Alarm, Power On, Sleep, Output
The location system is utilizing base station to transmit and receive RF signal with portable RFID devices such as
ID tag or wrist strap. All location information are stored, processed and displayed on LIMS software platform for
further management purpose against human or object.
The RSSI type base station is working at both 2.4 GHz and 125 kHz
frequency. The higher frequency 2.4GHz is for large area locating while
125kHz is for close distance area confirmation (e.g. through an entry).
Application Diagram
Protocol 802.15.4a
Max. Transmission Power 16dBm
Physical
IP54 for indoor version;
Ingress Protection
IP65 for outdoor version
2.45kg for indoor version;
Weight
3.9kg for outdoor version
Electrical
Power POE/220AC
Power Consumption ≤ 30W
2.4G Ant
Application Diagram
Protocol 802.15.4a
Max. Transmission Power 19dBm
Physical
IP54 for indoor version;
Ingress Protection
IP65 for outdoor version
Indoor version:
Electrical
Power POE
Power Consumption 7W
Specifications
Server Hardware Requirement (Minimum)
Processor Intel Xeon E7-2870
Memory 4 GByte
Supported Database
Microsoft SQL Server 2012, version 11.0.5058.0
Applications
Installation Requirement
Remote access via team viewer is recommended for first installation and tuning, therefore public IP network shall be allowed to access during
the period.
The ID tag is integrated with standard ISO 14443A RFID chipset, with
rechargeable battery.
Specifications
Radio Frequency Band 2.4 - 2.48GHz
Protocol Private
Data Rate 1M/250K bps
Weight ≤ 120g
The Wrist Strap is water proof and anti-tampering, with emergency alarm,
low battery alarm and other RFID features.
Specifications
Radio Frequency Band 2.4 - 2.483GHz
Protocol 802.15.4
Data Rate 1MHz
Weight ≤ 80g
Emergency Button
USB Charger
Charge Pin
Pentagon
Allen Key
The location system is utilizing base station to transmit and receive RF signal
with portable RFID devices such as ID tag or wrist strap. All location
information are stored, processed and displayed on LIMS software platform for
further management purpose against human or object.
Comba’s location base stations include TDOA (Time Difference Of Arrival) type
and RSSI (Received Signal Strength Indication) type. The TDOA type base
station is designed for high accuracy while RSSI type is for lower accuracy yet
more cost effective.
Specifications
Radio Frequency Band 2.4 - 2.483GHz
Bandwidth 83MHz
Gain 8.5dBi
Horizontal Beamwidth 80 degree
Vertical Beamwidth 60 degree
Front-to-Rear Ratio ≥ 20dB
VSWR ≤ 1.5
status update.
North Bound Interface (NBI) for integration with other EMS or NMS with SNMP (v2c).
Support SMS or IP-based communication mode. Optional interface to SMS Center (SMPPv3.3 or 3.4). Support
Optional Electronic Map Interface (need local eMap geographical data, SHP format).
Running on standard Server platform.Utilizing proven Microsoft SQL database to achieve scalable, reliable and
secure architecture.
CMS Capacity
NE Qty 10000, under recommended HW & SW configuration
Concurrent login user Qty Maximum 50, recommended 15 for a better performance
CMS Performance
Data Packet Decoding Speed 10 per second
SMS. With SMS mode, devices must be equipped with inside modems to send/receive SMS to/from CMS; and
CMS also must be equipped with a modem or directly connecting with SMS Center/gateway to send/receive
Packet Switched Data (PSD), such as GPRS, CDMA 1x, HSDPA, etc. With PSD mode, devices must be
equipped with inside modems, and inserted with a PSD enabled SIM/UIM/USIM. In CMS side, an IP Gateway
from Comba is a must if devices be given dynamic IPs from local PSD network.
Ethernet. With this mode, devices must be equipped with inside Network Interface Card (NIC).
North-Bound Interface
Currently CMS supports below NBI to transfer CMS information to other EMS/NMS.
SNMP Trap, Email, SMS for alarm forwarding.
Memory 8GByte
Hard disk 500GByte
Network 2 x 100/1000M NIC
CMS GUI
Sales Enquiries
sales@comba-telecom.com
Marketing
marketing@comba-telecom.com
Investor Relations
investorrelations@comba-telecom.com
HR
hr.hk@comba-telecom.com
Website
http://www.comba-telecom.com/
Website Feedback
webmaster@comba-telecom.com
China Headquarters
Comba Telecom Systems China Ltd
Add: No.10 Shenzhou Road,
Guangzhou Science City, China
Tel: +8620 2839 0000
Fax: +8620 2839 0136
Business Card
Corporate & APAC Headquarters
Comba Telecom Systems Holdings Ltd
Add: 611 East Wing, No.8 Science Park West Avenue,
Hong Kong Science Park, Hong Kong
Tel: +852 2636 6861
Fax: +852 2637 0966/+852 2116 6055
Europe Headquarters
Comba Telecom Systems AB
Add: Gustavslundsvagen 147,
SE-167 51 Bromma, Stockholm,
Sweden
Tel: +46 8 253 870
Fax: +46 8 253 871