This document is a data sheet for a variable frequency drive. It provides technical requirements and system condition details in two parts: 1) to be furnished by the purchaser, and 2) system requirements. Key details include the drive will operate three-phase 415V input power, support single motor applications from 10-100% speed range, allow for auto and manual speed adjustment, and provide features like soft start and fault diagnostics. Motor details like kW rating, voltage/frequency ranges, and starting current are variables marked with asterisks.
This document is a data sheet for a variable frequency drive. It provides technical requirements and system condition details in two parts: 1) to be furnished by the purchaser, and 2) system requirements. Key details include the drive will operate three-phase 415V input power, support single motor applications from 10-100% speed range, allow for auto and manual speed adjustment, and provide features like soft start and fault diagnostics. Motor details like kW rating, voltage/frequency ranges, and starting current are variables marked with asterisks.
This document is a data sheet for a variable frequency drive. It provides technical requirements and system condition details in two parts: 1) to be furnished by the purchaser, and 2) system requirements. Key details include the drive will operate three-phase 415V input power, support single motor applications from 10-100% speed range, allow for auto and manual speed adjustment, and provide features like soft start and fault diagnostics. Motor details like kW rating, voltage/frequency ranges, and starting current are variables marked with asterisks.
Rev Date Purpose of Issue Prepared by Checked by Approved by DATA SHEET FOR DATA SHEET FOR VARIABLE FREQUENCY DRIVE VARIABLE FREQUENCY DRIVE
PART - I (TO BE FURNISHED BY PURCHASER)
Sl.No. DESCRIPTION TECHNICAL REQUIREMENTS
1.0 Reference Standards IEC 146
IEC 61800-2, IEC 61800-3, IEC 61800-5 IEC 61508
2.0 Site conditions
2.1 Ambient Temperature 2.1.1 Maximum 2.1.2 Minimum 2.2 Design Ambient Temperature 2.3 Relative Humidity 2.3.1 Maximum 2.3.2 Minimum 2.4 Altitude 2.5 Installation Indoor, Air Conditioned/Pressurized Room
3.0 Input Power System Conditions
3.1 Number of Phases Three (4 Wires) 3.2 Rated Voltage 415 V ± 10 % 3.3 Rated Frequency 50 Hz ± 5 % 3.4 Combined V & F Variation 10% 3.5 Fault Level 50 kA for 1 Sec. at 415 V 3.6 System Earthing Solidly Earthed
4.0 Motor Details
4.1 Drive system Single 4.2 Type of motor Squirrel Cage Induction Motor 4.3 kW rating * 4.4 No. of motors * 4.5 Starting condition Soft Start 4.6 Frequency range * 4.7 Voltage range * 4.8 Full load current * 4.9 Full load PF * 4.9.1 At lowest KW * 4.9.2 At highest KW * 4.10 Starting current * 4.11 Load Torque details
5.0 System Requirements
5.1 Speed range required 10 - 100% 5.2 Adjustment of Speed Auto & Manual Speed reference by measurement of stator voltage frequency 5.3 through voltage transformer * 5.4 Reference signal 4-20mA 5.5 Soft start feature 5.5.1 Starting current 150%, 250%, 450% 5.6 By pass breaker or starter 5.7 Acceleration time 5.8 Deceleration time 5.9 Short time voltage dip 5.10 Harmonic limit on input 5.11 Fault diagonistic Required 5.12 Braking 5.13 Regeneration 5.14 Any other requirement