Professional Documents
Culture Documents
MODEL NO.: V390HJ1 Suffix: P02: Product Specification
MODEL NO.: V390HJ1 Suffix: P02: Product Specification
□ Tentative Specification
□ Preliminary Specification
■ Approval Specification
APPROVED BY SIGNATURE
Name / Title
Note
Please return 1 copy for your confirmation with your signature and
comments.
CONTENTS
1. GENERAL DESCRIPTION ........................................................................................................................................... 4
1.1 OVERVIEW ........................................................................................................................................................... 4
1.2 FEATURES............................................................................................................................................................ 4
1.3 MECHANICAL SPECIFICATIONS ........................................................................................................................ 4
2. ABSOLUTE MAXIMUM RATINGS............................................................................................................................... 5
2.1 ABSOLUTE RATINGS OF ENVIRONMENT ........................................................................................................ 5
2.2 PACKAGE STORAGE ........................................................................................................................................... 6
2.3 ELECTRICAL ABSOLUTE RATINGS.................................................................................................................... 6
2.3.1 ELECTRICAL ABSOLUTE RATINGS (OPEN CELL) ................................................................................ 6
3. ELECTRICAL CHARACTERISTICS............................................................................................................................ 7
3.1 TFT LCD OPEN CELL........................................................................................................................................... 7
4. BLOCK DIAGRAM OF INTERFACE.......................................................................................................................... 10
4.1 TFT LCD OPEN CELL......................................................................................................................................... 10
5. INPUT TERMINAL PIN ASSIGNMENT...................................................................................................................... 11
5.1 TFT LCD OPEN CELL INPUT ............................................................................................................................. 11
5.2 BLOCK DIAGRAM OF INTERFACE ................................................................................................................... 14
5.3 LVDS INTERFACE .............................................................................................................................................. 16
5.4 COLOR DATA INPUT ASSIGNMENT ................................................................................................................. 18
5.5 FLICKER (VCOM) ADJUSTMENT ...................................................................................................................... 19
6. INTERFACE TIMING .................................................................................................................................................. 20
6.1 INPUT SIGNAL TIMING SPECIFICATIONS ....................................................................................................... 20
6.2 POWER ON/OFF SEQUENCE ........................................................................................................................... 23
7. OPTICAL CHARACTERISTICS................................................................................................................................. 24
7.1 TEST CONDITIONS ............................................................................................................................................ 24
7.2 OPTICAL SPECIFICATIONS............................................................................................................................... 25
8. DEFINITION OF LABELS .......................................................................................................................................... 28
9. PACKAGING .............................................................................................................................................................. 29
9.1 PACKING SPECIFICATIONS .............................................................................................................................. 29
9.2 PACKING METHOD ............................................................................................................................................ 29
10. PRECAUTIONS ........................................................................................................................................................ 31
10.1 ASSEMBLY AND HANDLING PRECAUTIONS ............................................................................................... 31
10.2 SAFETY PRECAUTIONS ................................................................................................................................. 31
11. MECHANICAL CHARACTERISTIC ......................................................................................................................... 32
REVISION HISTORY
Page
Version Date Section Description
(New)
Ver. 4.0 May 15, 2013 All All The Approval Specification was first issued.
1. GENERAL DESCRIPTION
1.1 OVERVIEW
V390HJ1-P02 is a 39” TFT Liquid Crystal Display product with driver ICs and 2ch-LVDS interface. This product
supports 1920 x 1080 Full HDTV format and can display 16.7M colors (8-bit/color).
1.2 FEATURES
CHARACTERISTICS ITEMS SPECIFICATIONS
Screen Diagonal [in] 38.5
Pixels [lines] 1920 × 1080
Active Area [mm] 853.92(H) x 480.33(V)
Sub-Pixel Pitch [mm] 0.14825 (H) x 0.44475 (V)
Pixel Arrangement RGB vertical stripe
Weight [g] TYP. 1280g
Physical Size [mm] 874.46(W) x 535.03(H) x 1.35(D) typ.
Display Mode Transmissive mode / Normallly black
Contrast Ratio 3000:1 Typ.
(Typical value measure at INX’s module)
Glass thickness (Array / CF) [mm] 0.5 / 0.5
Viewing Angle (CR>20) +88/-88(H), +88/-88(V) Typ. (CR≧20)
(Typical value measure at INX’s module)
Color Chromaticity * Please refer to “color chromaticity” on p.25
Cell Transparency [%] 5.8%
Polarizer Surface Treatment Anti-Glare coating (Haze 3.5%)
Hard Coating (3H)
Value
Item Symbol Unit Note
Min. Max.
Note (1) Permanent damage to the device may occur if maximum values are exceeded. Function operation
should be restricted to the conditions described under Normal Operating Conditions.
3. ELECTRICAL CHARACTERISTICS
3.1 TFT LCD OPEN CELL
(Ta = 25 ± 2 ºC)
Value
Parameter Symbol Unit Note
Min. Typ. Max.
Note (1) The module should be always operated within the above ranges.
Note (2) Measurement condition:
Vcc
0.9Vcc
0.1Vcc
GND
470us
Note (3) The specified power supply current is under the conditions at Vcc = 12 V, Ta = 25 ± 2 ºC, fv = 60 Hz,
whereas a power dissipation check pattern below is displayed.
c. Horizontal Pattern
VLVTH
VLVTL
ERX0(+/-)
ERX1(+/-)
SCAN DRIVER
ERX2(+/-)
(WF23-400-513C,FCN) or equivalent
ERX3(+/-)
ECLK(+/-)
TFT LCD PANEL
(1920x3x1080)
INPUT CONNECTOR
ORX0(+/-) TIMING
ORX1(+/-) CONTROLLER
ORX2(+/-)
ORX3(+/-)
OCLK(+/-)
Data Driver (mini-LVDS)
SELLVDS
DC/DC CONVERTER
Vcc
GND
Note (4) LVDS signal pin connected to the LCM side has the following diagram. R1 in the system side should be
less than 1K Ohm. (R1 < 1K Ohm)
Note (5) Two pixel data send into the module for every clock cycle. The first pixel of the frame is odd pixel and the
second pixel is even pixel.
Note (6) LVDS connector mating dimension range request is 0.93mm~1.0mm as follow:
Current cycle
RXCLK±
ORX0± G0 R5 R4 R3 R2 R1 R0
ORX1± B1 B0 G5 G4 G3 G2 G1
ORX2± DE VS HS B5 B4 B3 B2
ORX3± RSVD B7 B6 G7 G6 R7 R6
ERX0± G0 R5 R4 R3 R2 R1 R0
ERX1± B1 B0 G5 G4 G3 G2 G1
ERX2± DE VS HS B5 B4 B3 B2
ERX3± RSVD B7 B6 G7 G6 R7 R6
RXCLK±
ORX0± G2 R7 R6 R5 R4 R3 R2
ORX1± B3 B2 G7 G6 G5 G4 G3
ORX2± DE VS HS B7 B6 B5 B4
ORX3± RSVD B1 B0 G1 G0 R1 R0
ERX0± G2 R7 R6 R5 R4 R3 R2
ERX1± B3 B2 G7 G6 G5 G4 G3
ERX2± DE VS HS B7 B6 B5 B4
ERX3± RSVD B1 B0 G1 G0 R1 R0
6. INTERFACE TIMING
6.1 INPUT SIGNAL TIMING SPECIFICATIONS
(Ta = 25 ± 2 ºC)
The input signal timing specifications are shown as the following table and timing diagram.
Blank Tvb 35 45 55 Th
Note (1) Please make sure the range of frame rate has follow the below equation:
Fclkin(max) ≧ Fr6 ╳ Tv ╳ Th
Fr5 ╳ Tv ╳ Th ≧ Fclkin(min)
Note (2) This module is operated in DE only mode and please follow the input signal timing diagram below:
Note (3) The input clock cycle-to-cycle jitter is defined as below figures. Trcl = I T1 – TI
Note (4) The SSCG (Spread spectrum clock generator) is defined as below figures.
Note (5) The LVDS timing diagram and setup/hold time is defined and showing as the following figures.
Tc
RXCLK+/-
RXn+/-
TRSKM
0.1VCC 0.1Vcc
0V
0.5≦T1≦10ms T1 T3
0≦T2≦50ms
0≦T3≦50ms
500ms ≦T4 T2
T4
VALID
LVDS Signals
0V
Power On P
0≦T7≦T2
0≦T8≦T3
T7 T8
Option Signals
(SELLVDS)
T5 T6
Note (1) The supply voltage of the external system for the module input should follow the definition of Vcc.
Note (2) Apply the lamp voltage within the LCD operation range. When the backlight turns on before the LCD
operation or the LCD turns off before the backlight turns off, the display may momentarily become
abnormal screen.
Note (3) In case of VCC is in off level, please keep the level of input signals on the low or high impedance.
If T2<0,that maybe cause electrical overstress failure.
Note (4) T4 should be measured after the module has been fully discharged between power off and on period.
Note (5) Interface signal shall not be kept at high impedance when the power is on.
7. OPTICAL CHARACTERISTICS
7.1 TEST CONDITIONS
Item Symbol Value Unit
25±2
o
Ambient Temperature Ta C
The LCD module should be stabilized at given temperature for 1 hour to avoid abrupt temperature change during
measuring in a windless room.
Rcx 0.643 -
Red
Rcy 0.329 -
Gcx 0.279 -
Green θx=0°, θY =0°
Color Gcy -0.03 0.589 +0.03 -
Viewing Angle at Normal (0)
Chromaticity Bcx Direction -
0.133
Blue Standard light source “C”
Bcy 0.111 -
Wcx 0.311 -
White
Wcy 0.347 -
Note (0) Light source is the standard light source ”C” which is defined by CIE and driving voltage are based on
suitable gamma voltages. The calculating method is as following:
1. Measure Module’s and BLU’s spectrum at center point. White is without signal input and R,G,B are
with signal input. BLU (for V390HJ1-L02) is supplied by INX.
2. Calculate cell’s spectrum.
3. Calculate cell’s chromaticity by using the spectrum of standard light source “C”.
Note (1) Light source is the BLU which supplied by INX and driving voltage are based on suitable gamma
voltages.
Normal
θx = θy = 0º
θy- θy+
6 o’clock
y- x+ θX+ = 90º
θy- = 90º
100%
90%
Optical
Gray Level 0
Response
10%
0%
Time
TR TF
Horizontal Line
W/4 1 2
Vertical Line
3W/4 3 4
Active Area
XXXXXXXXXXXXXX XXXXXXXXXXXXXX