Professional Documents
Culture Documents
Pom - Delrin - Gamma
Pom - Delrin - Gamma
acetal resin
PRODUCT AND PROPERTY GUIDE
DuPont™ Delrin® acetal resin
i
DuPont™ Delrin® Product Offering
Unreinforced, Delrin® 100P BK602 High viscosity acetal homopolymer, best combination of stiffness and toughness.
General Purpose Delrin® 100P NC010
Delrin® 111P BK402 High viscosity acetal homopolymer, with enhanced crystallization.
Delrin® 111P NC010
Delrin® II 100 NC010 High viscosity acetal homopolymer, excellent creep and fatigue resistance.
Delrin® 311DP BK402 Medium-high viscosity acetal homopolymer, enhanced crystallization and dimensional
Delrin® 311DP NC010 stability.
Delrin® 500P BK602 Medium viscosity acetal homopolymer, balance of impact and flow properties.
Delrin® 500P NC010
Delrin® 511P BK402 Medium viscosity acetal homopolymer, enhanced crystallization.
Delrin® 511P NC010
Delrin® 900P BK602 Low viscosity acetal homopolymer, high flow.
Delrin® 900P NC010
Extrusion Resins Delrin® 150 NC010 High viscosity acetal homopolymer for extrusion.
Toughened Resins Delrin® 100ST BK602 Super Tough, high viscosity acetal homopolymer, highest impact strength.
Delrin® 100ST NC010
Delrin® 100T BK602 Toughened, high viscosity acetal homopolymer, high impact strength.
Delrin® 100T NC010
Delrin® 500T BK602 Toughened, medium viscosity acetal homopolymer, high impact strength.
Delrin® 500T NC010
Low Wear and Delrin® 100AL NC010 High viscosity acetal homopolymer with advanced lubricants for low wear & friction.
Friction Resins Delrin® 100KM BK402 Acetal homopolymer with Kevlar® Aramid Resin for with outstanding abrasion resistance.
Delrin® 100KM NC000
Delrin® 100TL NC010 High viscosity acetal homopolymer with 1.5% PTFE Micropowder.
Delrin® 500AF 20% Teflon® PTFE Fiber in Acetal Homopolymer.
Delrin® 500AL NC010 Medium viscosity acetal homopolymer, with Advanced Lubricants for low wear & friction.
Delrin® 500CL BK601 Medium viscosity acetal homopolymer, chemically lubricated.
Delrin® 500CL NC010
Delrin® 500MP NC010 Medium viscosity acetal homopolymer with Teflon® PTFE Micropowder and additional lubricant.
Delrin® 500TL NC010 1.5% Teflon® PTFE Micropowder in acetal homopolymer.
Delrin® 520MP NC010 20% Teflon® PTFE Micropowder in acetal homopolymer.
Delrin® 911AL NC010 Low viscosity acetal homopolymer, with Advanced Lubricants for low wear & friction and
dimensionally stable parts.
Delrin® 500SC NC010 Silicone Concentrate.
Glass Filled / Delrin® 570 NC000 20% Glass Fiber filled acetal homopolymer.
Reinforced Resins Delrin® 510GR NC000 10% Glass Reinforced acetal homopolymer, high strength and stiffness.
Delrin® 525GR NC000 25% Glass Reinforced acetal homopolymer, very high strength and stiffness.
Low Emissions Resins Delrin® 100PE NC010 High viscosity acetal homopolymer with low emissions.
Delrin® 500PE NC010 Medium viscosity acetal homopolymer with low emissions.
Delrin® Product Guide Table
Unreinforced
Melt Mass-Flow
190°C, 2.16kg ISO 1133 g/10 min 2.5 2.5 2.4 2.4
Rate
1.0mm
V/mil 812
1E2 Hz 3.8
Relative Permittivity IEC 60250
1E6 Hz 3.7
1E2 Hz 200
Dissipation Factor IEC 60250 E-4
1E6 Hz 40
CTI IEC 60112 V 600 600
1
Delrin® Product Guide Table
Unreinforced
0.75mm HB HB
0.84mm
Flammability IEC
0.8mm
Classification 60695-11-10
1.5mm HB HB HB HB
3.0mm HB HB HB HB
0.75mm HB
Flammability
Flammability 0.84mm
UL94
Classification 1.5mm HB HB HB
3.0mm HB
Oxygen Index ISO 4589-1/-2 % 21 17
High Amperage Arc
0.75mm UL 746A arcs
Ignition Resistance
0.75mm
Hot Wire Ignition 1.5mm UL 746A s
3.0mm
0.75mm 50 50
0.84mm
0.85mm
RTI, Electrical UL 746B C
0.8mm
1.5mm 110 110 110 110
3.0mm 110 110 110 110
Temperature Index
0.75mm 50 50
0.84mm
0.85mm
RTI, Impact UL 746B C
0.8mm
1.5mm 85 85 85 85
3.0mm 90 90 90 90
0.75mm 50 50
0.84mm
0.85mm
RTI, Strength UL 746B C
0.8mm
1.5mm 90 90 90 90
3.0mm 95 95 95 95
kg/m3 1420 1420 1420 1420
Density ISO 1183
g/cm3 1.42 1.42 1.42 1.42
Scale M 92 92
Hardness, Rockwell ISO 2039/2
Scale R 120 120
Other
C 90 90 90 90
Mold Temperature Optimum
F 195 195 195 195
Drying Time, Dehumidified Dryer h 2-4 2-4 2-4 2-4
C 80 80 80 80
Drying Temperature
F 175 175 175 175
Processing Moisture Content % <0.2 <0.2 <0.2 <0.2
MPa 90-110 90-110 90-110 90-110
Hold Pressure Range
kpsi 13-15 13-16 13-16 13-16
2
Delrin® Product Guide Table
Unreinforced
Delrin® II 100 Delrin® 311DP Delrin® 311DP Delrin® 500P Delrin® 500P
Property Method Units NC010 BK402 NC010 BK602 NC010
Resin Identification ISO 1043 POM POM POM POM POM
Part Marking Code ISO 11469 >POM< >POM< >POM< >POM< >POM<
MPa 71 74 73 71 70
Yield Stress ISO 527
kpsi 10.2 10.7 10.6 10.3 10.1
Yield Strain ISO 527 % 25 15 16 14 17
MPa
Stress at Break ISO 527
kpsi
63 35
Strain at Break ISO 527 %
50mm/min 35 40
Nominal Strain at
ISO 527 % 41 25 35 25 30
Break
MPa 3100 3300 3300 3100 3100
Mechanical
Melt Mass-Flow
190°C, 2.16kg ISO 1133 g/10 min 2.3 7 7 15 15
Rate
1.0mm
V/mil 838
1E2 Hz 3.9
Relative Permittivity IEC 60250
1E6 Hz 3.8 3.9
1E2 Hz 200
Dissipation Factor IEC 60250 E-4
1E6 Hz 60
CTI IEC 60112 V 600 600
3
Delrin® Product Guide Table
Unreinforced
Delrin® II 100 Delrin® 311DP Delrin® 311DP Delrin® 500P Delrin® 500P
Property Method Units NC010 BK402 NC010 BK602 NC010
Resin Identification 0.75mm ISO 1043 HB HB HB HB
0.84mm
Flammability IEC
0.8mm HB
Classification 60695-11-10
1.5mm HB HB HB
3.0mm HB HB HB
0.75mm HB HB HB
Flammability
Flammability 0.84mm
UL94
Classification 1.5mm HB
3.0mm HB
Oxygen Index ISO 4589-1/-2 % 22
High Amperage Arc
0.75mm UL 746A arcs 200 200
Ignition Resistance
0.75mm 8 8
Hot Wire Ignition 1.5mm UL 746A s 11 11
3.0mm 15 15
0.75mm 50 50 50 50
0.84mm
0.85mm
RTI, Electrical UL 746B C
0.8mm 50
1.5mm 110 110 110 110 110
3.0mm 110 110 110
Temperature Index
0.75mm 50 50 50 50
0.84mm
0.85mm
RTI, Impact UL 746B C
0.8mm 50
1.5mm 85 85 85 85 85
3.0mm 90 90 90 90 90
0.75mm 50 50 50 50
0.84mm
0.85mm
RTI, Strength UL 746B C
0.8mm 50
1.5mm 90 90 90 90 90
3.0mm 95 95 95 95 95
kg/m3 1420 1420 1420 1420 1420
Density ISO 1183
g/cm3 1.42 1.42 1.42 1.42 1.42
Scale M 92
Hardness, Rockwell ISO 2039/2
Scale R 120
Other
C 90 90 90 90 90
Mold Temperature Optimum
F 195 195 195 195 195
Drying Time, Dehumidified Dryer h 2-4 2-4 2-4 2-4 2-4
C 80 80 80 80 80
Drying Temperature
F 175 175 175 175 175
Processing Moisture Content % <0.2 <0.2 <0.2 <0.2 <0.2
MPa 90-110 80-100 80-100 80-100 80-100
Hold Pressure Range
kpsi 13-16 12-15 12-15 12-15 12-15
4
Delrin® Product Guide Table
Unreinforced
Melt Mass-Flow
190°C, 2.16kg ISO 1133 g/10 min 14 15 25 25
Rate
1.0mm
V/mil 812
1E2 Hz 3.5 3.8
Relative Permittivity IEC 60250
1E6 Hz 3.8 3.8
1E2 Hz 180
Dissipation Factor IEC 60250 E-4
1E6 Hz 60 50
CTI IEC 60112 V 600 600
5
Delrin® Product Guide Table
Unreinforced
Flammability 0.84mm
UL94
Classification 1.5mm HB
3.0mm HB
Oxygen Index ISO 4589-1/-2 % 21 22 23
High Amperage Arc
0.75mm UL 746A arcs 200
Ignition Resistance
0.75mm 8
Hot Wire Ignition 1.5mm UL 746A s 13
3.0mm 22
0.75mm 50 50 50 50
0.84mm
0.85mm
RTI, Electrical UL 746B C
0.8mm
1.5mm 110 110 110 110
3.0mm 110 110
Temperature Index
0.75mm 50 50 50 50
0.84mm
0.85mm
RTI, Impact UL 746B C
0.8mm
1.5mm 85 85 85 85
3.0mm 90 90 90 90
0.75mm 50 50 50 50
0.84mm
0.85mm
RTI, Strength UL 746B C
0.8mm
1.5mm 90 90 90 90
3.0mm 95 95 95 95
kg/m3 1420 1420 1420 1420
Density ISO 1183
g/cm3 1.42 1.42 1.42 1.42
Scale M 92 92
Hardness, Rockwell ISO 2039/2
Scale R 120 120
Other
C 90 90 90 90
Mold Temperature Optimum
F 195 195 195 195
Drying Time, Dehumidified Dryer h 2-4 2-4 2-4 2-4
C 80 80 80 80
Drying Temperature
F 175 175 175 175
Processing Moisture Content % <0.2 <0.2 <0.2 <0.2
MPa 80-100 80-100 80-100 80-100
Hold Pressure Range
kpsi 12-15 12-15 12-15 12-15
6
Delrin® Product Guide Table
Toughened
Melt Mass-Flow
190°C, 2.16kg ISO 1133 g/10 min 2.1 2.0 2.0
Rate
1.0mm
V/mil 990
1E2 Hz 4.4
Relative Permittivity IEC 60250
1E6 Hz 3.8
1E2 Hz 65
Dissipation Factor IEC 60250 E-4
1E6 Hz
CTI IEC 60112 V 600
7
Delrin® Product Guide Table
Toughened
Flammability 0.84mm
UL94
Classification 1.5mm
3.0mm
Oxygen Index ISO 4589-1/-2 % 21
High Amperage Arc
0.75mm UL 746A arcs
Ignition Resistance
0.75mm
Hot Wire Ignition 1.5mm UL 746A s
3.0mm
0.75mm
0.84mm
0.85mm
RTI, Electrical UL 746B C
0.8mm
1.5mm 105 105
3.0mm 105 105
Temperature Index
0.75mm
0.84mm
0.85mm
RTI, Impact UL 746B C
0.8mm
1.5mm 85 85
3.0mm 85 85
0.75mm
0.84mm
0.85mm
RTI, Strength UL 746B C
0.8mm
1.5mm 85 85
3.0mm 85 85
kg/m3 1330 1340 1370
Density ISO 1183
g/cm3 1.33 1.34 1.37
Scale M 58
Hardness, Rockwell ISO 2039/2
Scale R 105
Other
C 50 50 50
Mold Temperature Optimum
F 122 122 122
Drying Time, Dehumidified Dryer h 2-4 2-4 2-4
C 80 80 80
Drying Temperature
F 175 175 175
Processing Moisture Content % <0.05 <0.05 <0.05
MPa 60-80 60-80 60-80
Hold Pressure Range
kpsi 9-12 9-12 9-12
8
Delrin® Product Guide Table
Toughened
Melt Mass-Flow
190°C, 2.16kg ISO 1133 g/10 min 2.0 12 12
Rate
1.0mm
V/mil
1E2 Hz 3.6
Relative Permittivity IEC 60250
1E6 Hz 3.1 3.6
1E2 Hz
Dissipation Factor IEC 60250 E-4
1E6 Hz 90 160
CTI IEC 60112 V 600 600
9
Delrin® Product Guide Table
Toughened
Flammability 0.84mm
UL94
Classification 1.5mm HB
3.0mm
Oxygen Index ISO 4589-1/-2 % 23
High Amperage Arc
0.75mm UL 746A arcs 200 200
Ignition Resistance
0.75mm 8 8
Hot Wire Ignition 1.5mm UL 746A s 11 11
3.0mm 15 15
0.75mm 105 105
0.84mm
0.85mm
RTI, Electrical UL 746B C
0.8mm
1.5mm 100
3.0mm 100
Temperature Index
0.75mm 85 85
0.84mm
0.85mm
RTI, Impact UL 746B C
0.8mm
1.5mm 85
3.0mm 85
0.75mm 85 85
0.84mm
0.85mm
RTI, Strength UL 746B C
0.8mm
1.5mm 85
3.0mm 85
kg/m3 1370 1390 1380
Density ISO 1183
g/cm3 1.37 1.39 1.38
Scale M 59 79
Hardness, Rockwell ISO 2039/2
Scale R 113 117
Other
C 50 50 50
Mold Temperature Optimum
F 122 122 122
Drying Time, Dehumidified Dryer h 2-4 2-4 2-4
C 80 80 80
Drying Temperature
F 175 175 175
Processing Moisture Content % <0.05 <0.05 <0.05
MPa 60-80 60-80 60-80
Hold Pressure Range
kpsi 9-12 9-12 9-12
10
Delrin® Product Guide Table
UV Stabilized
Delrin® 127UV Delrin® 127UV Delrin® 327UV Delrin® 527UV Delrin® 527UV
Property Method Units BK701 NC010 NC010 BK701 NC010
Resin Identification ISO 1043 POM POM POM POM POM
Part Marking Code ISO 11469 >POM< >POM< >POM< >POM< >POM<
MPa 71.5 70 73 71 70
Yield Stress ISO 527
kpsi 10.4 10.1 11 10.3 10.2
Yield Strain ISO 527 % 22 23 15 14 17
MPa
Stress at Break ISO 527
kpsi
Strain at Break ISO 527 %
50mm/min 65 50 35 40
Nominal Strain at
ISO 527 % 37 45 35 23 30
Break
MPa 3000 2900 3200 3200 3100
Mechanical
Melt Mass-Flow
190°C, 2.16kg ISO 1133 g/10 min 2.5 2.4 7 15 15
Rate
1.0mm
V/mil 812 812
1E2 Hz 3.5 3.5
Relative Permittivity IEC 60250
1E6 Hz 3.4 3.8
1E2 Hz 180 180
Dissipation Factor IEC 60250 E-4
1E6 Hz 60 60
CTI IEC 60112 V 600 600
11
Delrin® Product Guide Table
UV Stabilized
Delrin® 127UV Delrin® 127UV Delrin® 327UV Delrin® 527UV Delrin® 527UV
Property Method Units BK701 NC010 NC010 BK701 NC010
Resin Identification 0.75mm ISO 1043
0.84mm HB HB HB
Flammability IEC
0.8mm
Classification 60695-11-10
1.5mm
3.0mm
0.75mm
Flammability
Flammability 0.84mm HB HB
UL94
Classification 1.5mm
3.0mm
Oxygen Index ISO 4589-1/-2 % 20 22
High Amperage Arc
0.75mm UL 746A arcs
Ignition Resistance
0.75mm
Hot Wire Ignition 1.5mm UL 746A s
3.0mm
0.75mm
0.84mm 50 50
0.85mm 50
RTI, Electrical UL 746B C
0.8mm
1.5mm
3.0mm
Temperature Index
0.75mm
0.84mm 50 50
0.85mm 50
RTI, Impact UL 746B C
0.8mm
1.5mm
3.0mm
0.75mm
0.84mm 50 50
0.85mm 50
RTI, Strength UL 746B C
0.8mm
1.5mm
3.0mm
kg/m3 1420 1420 1420 1410 1420
Density ISO 1183
g/cm3 1.42 1.42 1.42 1.41 1.42
Scale M 92 92
Hardness, Rockwell ISO 2039/2
Scale R 120 120
Other
C 90 90 90 90 90
Mold Temperature Optimum
F 194 195 195 195 195
Drying Time, Dehumidified Dryer h 2-4 2-4 2-4 2-4 2-4
C 80 80 80 80 80
Drying Temperature
F 175 175 175 175 175
Processing Moisture Content % <0.2 <0.2 <0.2 <0.2 <0.2
MPa 90-110 90-110 80-100 80-100 80-100
Hold Pressure Range
kpsi 13-16 13-16 12-15 12-15 12-15
12
Delrin® Product Guide Table
Melt Mass-Flow
190°C, 2.16kg ISO 1133 g/10 min
Rate
1.0mm
V/mil
1E2 Hz 3.7 3.7 3.9
Relative Permittivity IEC 60250
1E6 Hz 3.9 3.8 3.9
1E2 Hz
Dissipation Factor IEC 60250 E-4
1E6 Hz 70 50
CTI IEC 60112 V 600
13
Delrin® Product Guide Table
Flammability 0.84mm
UL94
Classification 1.5mm HB
3.0mm
Oxygen Index ISO 4589-1/-2 % 21
High Amperage Arc
0.75mm UL 746A arcs 150
Ignition Resistance
0.75mm 8
Hot Wire Ignition 1.5mm UL 746A s 9
3.0mm 11
0.75mm 50 50
0.84mm
0.85mm
RTI, Electrical UL 746B C
0.8mm
1.5mm 105
3.0mm 105
Temperature Index
0.75mm 50 50
0.84mm
0.85mm
RTI, Impact UL 746B C
0.8mm
1.5mm 85
3.0mm 85
0.75mm 50 50
0.84mm
0.85mm
RTI, Strength UL 746B C
0.8mm
1.5mm 90
3.0mm 90
kg/m3 1490 1600 1560
Density ISO 1183
g/cm3 1.49 1.60 1.56
Scale M
Hardness, Rockwell ISO 2039/2
Scale R
Other
C 90 90 90
Mold Temperature Optimum
F 195 195 195
Drying Time, Dehumidified Dryer h 2-4 2-4 2-4
C 80 80 80
Drying Temperature
F 175 175 175
Processing Moisture Content % <0.1 <0.1
MPa 80-100 80-100 80-100
Hold Pressure Range
kpsi 12-15 12-15 12-15
14
Delrin® Product Guide Table
Melt Mass-Flow
190°C, 2.16kg ISO 1133 g/10 min 2.5 2.2
Rate
1.0mm
V/mil
1E2 Hz
Relative Permittivity IEC 60250
1E6 Hz
1E2 Hz
Dissipation Factor IEC 60250 E-4
1E6 Hz
CTI IEC 60112 V
15
Delrin® Product Guide Table
Flammability 0.84mm
UL94
Classification 1.5mm HB
3.0mm HB
Oxygen Index ISO 4589-1/-2 %
High Amperage Arc
0.75mm UL 746A arcs
Ignition Resistance
0.75mm
Hot Wire Ignition 1.5mm UL 746A s
3.0mm
0.75mm 50
0.84mm
0.85mm
RTI, Electrical UL 746B C
0.8mm
1.5mm 50
3.0mm 50
Temperature Index
0.75mm 50
0.84mm
0.85mm
RTI, Impact UL 746B C
0.8mm
1.5mm 50
3.0mm 50
0.75mm 50
0.84mm
0.85mm
RTI, Strength UL 746B C
0.8mm
1.5mm 50
3.0mm 50
kg/m3 1400 1410 1410 1430
Density ISO 1183
g/cm3 1.40 1.41 1.41 1.43
Scale M
Hardness, Rockwell ISO 2039/2
Scale R
Other
Equilibrium 50%RH
ISO 62,
Water Absorption Immersion 24h %
Similar to
Saturation, immersed
Normal, 2.0mm 1.8 1.5 1.7
Molding Shrinkage ISO 294-4 %
Parallel, 2.0mm 2.0 1.8 1.8
C 210-220 210-220 210-220 210-220
Melt Temperature Range
F 410-430 410-430 410-430 410-430
C 215 215 215 215
Melt Temperature Optimum
F 420 420 420 420
C 80-100 80-100 80-100 80-100
Mold Temperature Range
F 175-210 175-210 175-210 175-210
Processing
C 90 90 90 90
Mold Temperature Optimum
F 195 195 195 195
Drying Time, Dehumidified Dryer h 2-4 2-4 2-4 2-4
C 80 80 80 80
Drying Temperature
F 175 175 175 175
Processing Moisture Content % <0.2 <0.2 <0.2 <0.2
MPa 90-110 80-100 80-100 90-110
Hold Pressure Range
kpsi 13-16 12-15 12-15 13-16
16
Delrin® Product Guide Table
Melt Mass-Flow
190°C, 2.16kg ISO 1133 g/10 min 14 15 15
Rate
1.0mm
V/mil
1E2 Hz
Relative Permittivity IEC 60250
1E6 Hz 3.1 3.5
1E2 Hz
Dissipation Factor IEC 60250 E-4
1E6 Hz 90 60
CTI IEC 60112 V 600 600 600
17
Delrin® Product Guide Table
Flammability 0.84mm
UL94
Classification 1.5mm
3.0mm
Oxygen Index ISO 4589-1/-2 % 23 22
High Amperage Arc
0.75mm UL 746A arcs
Ignition Resistance
0.75mm
Hot Wire Ignition 1.5mm UL 746A s
3.0mm
0.75mm 50 50 50
0.84mm
0.85mm
RTI, Electrical UL 746B C
0.8mm
1.5mm 105 110 100 100
3.0mm 105 110 100 100
Temperature Index
0.75mm 50 50 50
0.84mm
0.85mm
RTI, Impact UL 746B C
0.8mm
1.5mm 85 85 80 80
3.0mm 85 90 80 80
0.75mm 50 50 50
0.84mm
0.85mm
RTI, Strength UL 746B C
0.8mm
1.5mm 90 90 85 85
3.0mm 90 95 85 85
kg/m3 1530 1380 1410
Density ISO 1183
g/cm3 1.53 1.38 1.41
Scale M 92
Hardness, Rockwell ISO 2039/2
Scale R 120
Other
C 90 90 90 90
Mold Temperature Optimum
F 195 195 195 195
Drying Time, Dehumidified Dryer h 2-4 2-4 2-4 2-4
C 80 80 80 80
Drying Temperature
F 175 175 175 175
Processing Moisture Content % <0.2 <0.1 <0.2 <0.2
MPa 80-100 80-100 80-100 80-100
Hold Pressure Range
kpsi 12-15 12-15 12-15 12-15
18
Delrin® Product Guide Table
Melt Mass-Flow
190°C, 2.16kg ISO 1133 g/10 min 13 14 25
Rate
1.0mm
V/mil
1E2 Hz 3.6
Relative Permittivity IEC 60250
1E6 Hz 3.6
1E2 Hz
Dissipation Factor IEC 60250 E-4
1E6 Hz
CTI IEC 60112 V 600
19
Delrin® Product Guide Table
Flammability 0.84mm
UL94
Classification 1.5mm HB
3.0mm HB
Oxygen Index ISO 4589-1/-2 % 18
High Amperage Arc
0.75mm UL 746A arcs
Ignition Resistance
0.75mm
Hot Wire Ignition 1.5mm UL 746A s
3.0mm
0.75mm 50
0.84mm
0.85mm
RTI, Electrical UL 746B C
0.8mm
1.5mm 50 105 105 110
3.0mm 50 105 105 110
Temperature Index
0.75mm 50
0.84mm
0.85mm
RTI, Impact UL 746B C
0.8mm
1.5mm 50 85 85 85
3.0mm 50 85 85 90
0.75mm 50
0.84mm
0.85mm
RTI, Strength UL 746B C
0.8mm
1.5mm 50 90 90 90
3.0mm 50 90 90 95
kg/m3 1440 1410 1540 1400
Density ISO 1183
g/cm3 1.44 1.41 1.54 1.4
Scale M
Hardness, Rockwell ISO 2039/2
Scale R
Other
C 90 90 90 90
Mold Temperature Optimum
F 194 195 195 195
Drying Time, Dehumidified Dryer h 2-4 2-4 2-4 2-4
C 80 80 80 80
Drying Temperature
F 176 175 175 175
Processing Moisture Content % <0.2 <0.2 <0.2 <0.2
MPa 80-100 80-100 80-100 80-100
Hold Pressure Range
kpsi 12-15 12-15 12-15 12-15
20
Delrin® Product Guide Table
Melt Mass-Flow
190°C, 2.16kg ISO 1133 g/10 min 2.4 2.3 15
Rate
1.0mm
V/mil
1E2 Hz
Relative Permittivity IEC 60250
1E6 Hz
1E2 Hz
Dissipation Factor IEC 60250 E-4
1E6 Hz
CTI IEC 60112 V
21
Delrin® Product Guide Table
Flammability 0.84mm
UL94
Classification 1.5mm HB
3.0mm HB
Oxygen Index ISO 4589-1/-2 %
High Amperage Arc
0.75mm UL 746A arcs
Ignition Resistance
0.75mm
Hot Wire Ignition 1.5mm UL 746A s
3.0mm
0.75mm
0.84mm
0.85mm
RTI, Electrical UL 746B C
0.8mm
1.5mm 50
3.0mm 50
Temperature Index
0.75mm
0.84mm
0.85mm
RTI, Impact UL 746B C
0.8mm
1.5mm 50
3.0mm 50
0.75mm
0.84mm
0.85mm
RTI, Strength UL 746B C
0.8mm
1.5mm 50
3.0mm 85
kg/m3 1420 1420 1420
Density ISO 1183
g/cm3 1.42 1.42 1.42
Scale M
Hardness, Rockwell ISO 2039/2
Scale R
Other
Equilibrium 50%RH
ISO 62,
Water Absorption Immersion 24h % 0.39
Similar to
Saturation, immersed
Normal, 2.0mm 2.0 1.9
Molding Shrinkage ISO 294-4 %
Parallel, 2.0mm 1.8 1.8
C 210-220 200-210 200-210
Melt Temperature Range
F 410-430 390-410 390-410
C 215 205 205
Melt Temperature Optimum
F 420 400 400
C 80-100 80-100 80-100
Mold Temperature Range
F 175-210 175-210 175-210
Processing
C 90 90 90
Mold Temperature Optimum
F 195 195 195
Drying Time, Dehumidified Dryer h 2-4 2-4 2-4
C 80 80 80
Drying Temperature
F 175 175 175
Processing Moisture Content % <0.2 <0.2 <0.2
MPa 90-110 90-110 80-100
Hold Pressure Range
kpsi 13-16 13-16 12-15
22
DuPont™ Delrin® acetal resin
Americas
DuPont
BMP26-2363
Lancaster Pike & Route 141
Wilmington, DE 19805 U.S.A.
Telephone +1 302 774 1161
Toll-Free (USA) 800 628 6208
Fax +1 302 999 4399
Asia Pacific
DuPont China Holding Co, Ltd.
15th Floor, Shui On Plaza
333 Huai Hai Road (Central)
Shanghai 200021, China
Telephone +86 21 6386 6366
Fax +86 21 6386 6333
CAUTION: This product is not permitted to be sold for use in medical applications involving any implantation in the human body or where
contact with internal body fluids or tissues will equal or exceed 24 hours. For applications involving contact of less than 24 hours, see
“DuPont Medical Caution Statement,” H-50102 or contact your DuPont sales representative.
Copyright © 2006 DuPont. The DuPont Oval Logo, DuPont™, The miracles of science™, Delrin®, Teflon®, and Kevlar® are registered
trademarks or trademarks of E.I. du Pont de Nemours and Company or its affiliates. All rights reserved.