You are on page 1of 5

2SC3964

TOSHIBA Transistor Silicon NPN Epitaxial Type

2SC3964
Industrial Applications
Switching Applications
Unit: mm
Solenoid Drive Applications
Temperature Compensated for Audio Amplifier Output
Stage

• High DC current gain: hFE = 500 (min) (IC = 400 mA)


• Low collector-emitter saturation voltage: VCE (sat) = 0.5 V (max)
(IC = 300 mA)

Absolute Maximum Ratings (Tc = 25°C)

Characteristics Symbol Rating Unit

Collector-base voltage VCBO 40 V


Collector-emitter voltage VCEO 40 V
Emitter-base voltage VEBO 7 V
Collector current IC 2 A
Base current IB 0.5 A JEDEC ―
Collector power dissipation PC 1.5 W JEITA ―
Junction temperature Tj 150 °C TOSHIBA 2-8H1A
Storage temperature range Tstg −55 to 150 °C
Weight: 0.82 g (typ.)
Note: Using continuously under heavy loads (e.g. the application of high
temperature/current/voltage and the significant change in temperature, etc.) may cause this product to
decrease in the reliability significantly even if the operating conditions (i.e. operating
temperature/current/voltage, etc.) are within the absolute maximum ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test report
and estimated failure rate, etc).

1 2006-11-10
2SC3964
Electrical Characteristics (Tc = 25°C)

Characteristics Symbol Test Condition Min Typ. Max Unit

Collector cut-off current ICBO VCB = 40 V, IE = 0 ― ― 10 μA


Emitter cut-off current IEBO VEB = 7 V, IC = 0 ― ― 1 μA
Collector-emitter breakdown voltage V (BR) CEO IC = 10 mA, IB = 0 40 ― ― V
DC current gain hFE VCE = 1 V, IC = 400 mA 500 ― ―
Collector-emitter saturation voltage VCE (sat) IC = 300 mA, IB = 1 mA ― 0.3 0.5 V
Base-emitter saturation voltage VBE (sat) IC = 300 mA, IB = 1 mA ― ― 1.1 V
Transition frequency fT VCE = 2 V, IC = 100 mA ― 220 ― MHz
Collector output capacitance Cob VCB = 10 V, IB = 0, f = 1 MHz ― 20 ― pF

Turn-on time ton ― 1.0 ―


Output
20 μs IB1
Input

100 Ω
IB1

Switching time Storage time tstg IB2 ― 3.0 ― μs

IB2 VCC = 30 V

Fall time tf ― 1.2 ―


IB1 = −IB2 = 1 mA, duty cycle ≤ 1%

Marking

Lot No.

C3964 Part No. (or abbreviation code)

A line indicates
lead (Pb)-free package or
lead (Pb)-free finish.

2 2006-11-10
2SC3964

IC – VCE VCE – IC
2.4 1.2
Common emitter Common emitter
20 Ta = 25°C Ta = 25°C

VCE (V)
2.0 10 1.0
IB = 1 mA 5 10 20 30
(A)

5
1.6 0.8
Collector current IC

Collector-emitter voltage
2
1.2 0.6
1

0.8 0.5 0.4


50

0.4 IB = 0.2 mA 0.2

0
0 0
0 1 2 3 4 5 6 7 0 0.4 0.8 1.2 1.6 2.0 2.4 2.8

Collector-emitter voltage VCE (V) Collector current IC (A)

VCE – IC VCE – IC

Common emitter Common emitter


1.0 1.0
Ta = 100°C Ta = −55°C
VCE (V)
VCE (V)

IB = 1 mA 5 10 20 30 IB = 1 mA 5 10 20

0.8 0.8 30
Collector-emitter voltage
Collector-emitter voltage

0.6 50 0.6

0.4 0.4

50
0.2 0.2

0 0
0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 0 0.4 0.8 1.2 1.6 2.0 2.4 2.8

Collector current IC (A) Collector current IC (A)

hFE – IC VCE (sat) – IC


5000 5
Common emitter Common emitter
Collector-emitter saturation voltage

3000 3
VCE = 1 V IC/IB = 300
Ta = 100°C
DC current gain hFE

1000 25 1
VCE (sat) (V)

−55
500 0.5

300 0.3
Ta = 100°C 25

−55
100 0.1

50 0.05

30 0.03
0.01 0.03 0.1 0.3 1 3 0.01 0.03 0.1 0.3 1 3

Collector current IC (A) Collector current IC (A)

3 2006-11-10
2SC3964

VBE (sat) – IC IC – VBE


5
Common emitter 2.0 Common emitter
Base-emitter saturation voltage

3
IC/IB = 300 VCE = 1 V

(A)
1.6
VBE (sat) (V)

1 Ta = −55°C

Collector current IC
1.2
0.5 25
100
0.3
0.8

0.1 0.4 Ta = 100°C 25 −55


0.01 0.03 0.05 0.1 0.3 0.5 1 2

Collector current IC (A) 0


0 0.2 0.4 0.6 0.8 1.0 1.2 1.4

Base-emitter voltage VBE (V)

PC – Ta Safe Operating Area


2000 5
IC max (pulsed)* 10 ms*
Ta = 25°C 3
(mW)

IC max (continuous)
1 ms*

1500
(A)
Collector power dissipation PC

1 100 ms*
Collector current IC

0.5 1 s*

0.3 DC operation
1000 Ta = 25°C

0.1
*: Single nonrepetitive pulse
500 0.05 Ta = 25°C
0.03 Curves must be derated
linearly with increase in VCEO max

0 temperature.
0 40 80 120 160 200 0.01
0.1 0.3 0.5 1 3 5 10 30 50
Ambient temperature Ta (°C)
Collector-emitter voltage VCE (V)

4 2006-11-10
2SC3964

RESTRICTIONS ON PRODUCT USE 20070701-EN

• The information contained herein is subject to change without notice.

• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc.

• The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his
document shall be made at the customer’s own risk.

• The products described in this document shall not be used or embedded to any downstream products of which
manufacture, use and/or sale are prohibited under any applicable laws and regulations.

• The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which
may result from its use. No license is granted by implication or otherwise under any patents or other rights of
TOSHIBA or the third parties.

• Please contact your sales representative for product-by-product details in this document regarding RoHS
compatibility. Please use these products in this document in compliance with all applicable laws and regulations
that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses
occurring as a result of noncompliance with applicable laws and regulations.

5 2006-11-10

You might also like