Professional Documents
Culture Documents
FIGURE 1: CONFIGURATION
NOTES:
III. Threads UNJF-3B as per SAE AS8879, except dia. code 2 (UNJC-3B)
Technical
Written by Signature Date Approved by Signature Date Issue
Center
PAGE 1/6 A.GAILLARD B.REGNARD E
LISI AEROSPACE – Please refer to Central Documentation Website to check validity
1. APPLICATION
This product standard specifies the dimensions, tolerances and properties of a titanium nut for use in
aerospace application at a maximum operating temperature of 235°C (455°F).
®
This nut was designed to fit EN6114, EN6115 and Hi-Lite ST™ pins (with short threads and
cylindrical shank), nominal diameter and oversizes.
THIS DRAWING AND ALL TECHNICAL INFORMATION DISCLOSED THEREIN ARE THE EXCLUSIVE PROPERTY OF LISI AEROSPACE
2. REQUIREMENTS
Table 1: Material, and finish
MATERIAL FINISH
Technical
Issue
Center
PAGE 2/6 E
LISI AEROSPACE – Please refer to Central Documentation Website to check validity
ØA G H
Dia. Thread ØC ØD J M r S U R T W
±0,2 ±0,1 ±0,1
Code UNJF-3B ref. min. min. min. min. min. min. Max. ref. ref.
(±.008) (±.004) (±.004)
THIS DRAWING AND ALL TECHNICAL INFORMATION DISCLOSED THEREIN ARE THE EXCLUSIVE PROPERTY OF LISI AEROSPACE
(1) 7,43 6,30 4,33 5,31 2,30 0,4 1,34 2,40 0,8 0,14 5,52
2 .1640-32 - -
(.293) (.248) (.170) (.209) (.091) (.016) (.053) (.094) (.031) (.006) (.217)
8,99 7,17 5,33 6,01 2,45 0,4 1,66 2,78 0,8 0,16 6,28
3 .1900-32 - -
(.354) (.282) (.210) (.237) (.096) (.016) (.065) (.109) (.031) (.006) (.247)
10,05 8,06 6,12 6,50 2,50 0,4 1,87 3,04 0,8 0,18 7,07
3A .2160-28 - -
(.396) (.317) (.241) (.256) (.098) (.016) (.074) (.120) (.031) (.007) (.278)
11,53 8,94 7,31 6,88 2,40 0,4 2,04 3,26 0,8 0,20 7,85
4 .2500-28 - -
(.454) (.352) (.288) (.271) (.094) (.016) (.080) (.128) (.031) (.008) (.309)
14,09 10,77 8,90 7,99 2,51 0,4 2,57 3,90 0,8 0,24 9,45
5 .3125-24 - -
(.555) (.424) (.350) (.315) (.099) (.016) (.101) (.154) (.031) (.009) (.372)
16,91 14,38 10,49 9,01 2,51 0,4 3,03 4,78 1,0 0,32 12,63
6 .3750-24 - -
(.666) (.566) (.413) (.355) (.099) (.016) (.119) (.188) (.039) (.013) (.497)
19,25 16,16 12,07 10,36 2,67 0,4 3,79 5,64 1,0 0,36 14,20
7 .4375-20 - -
(.758) (.636) (.475) (.408) (.105) (.016) (.149) (.222) (.039) (.014) (.559)
22,21 17,96 13,66 11,37 2,66 0,4 4,17 6,16 1,0 0,41 15,73
8 .5000-20 - -
(.874) (.707) (.538) (.448) (.105) (.016) (.164) (.243) (.039) (.016) (.619)
24,79 19,79 15,24 1,11 14,09 15,10 2,77 0,4 6,35 8,35 1,0 0,45 17,33
9 .5625-18
(.976) (.779) (.600) (0.044) (.555) (.594) (.109) (.016) (.250) (.329) (.039) (.018) (.682)
26,49 22,43 17,62 1,11 14,21 16,69 3,03 0,4 6,37 8,54 1,0 0,51 19,64
10 .6250-18
(1.043) (.883) (.694) (0.044) (.559) (.657) (.119) (.016) (.251) (.336) (.039) (.020) (.773)
31,44 26,98 20,79 1,29 16,51 20,00 3,18 0,5 7,56 10,01 1,0 0,61 23,63
12 .7500-16
(1.238) (1.062) (.819) (0.051) (.650) (.787) (.125) (.020) (.298) (.394) (.039) (.024) (.930)
36,49 30,56 23,97 1,50 18,60 23,22 3,39 0,5 8,54 11,20 1,0 0,69 26,78
14 .8750-14
(1.437) (1.203) (.944) (0.059) (.732) (.914) (.133) (.020) (.336) (.441) (.039) (.027) (1.054)
41,47 34,22 27,14 1,82 21,55 26,55 3,66 0,5 10,08 12,97 1,0 0,77 29,98
16 1.0000-12
(1.633) (1.347) (1.069) (0.072) (.848) (1.045) (.144) (.020) (.397) (.511) (.039) (.030) (1.180)
46,72 37,70 30,32 1,82 25,43 29,73 3,66 0,5 12,13 15,24 1,0 0,85 33,02
18 1.1250-12
(1.839) (1.484) (1.194) (0.072) (1.001) (1.170) (.144) (.020) (.478) (.600) (.039) (.033) (1.300)
Technical
Issue
Center
PAGE 3/6 E
LISI AEROSPACE – Please refer to Central Documentation Website to check validity
Technical
Issue
Center
PAGE 4/6 E
LISI AEROSPACE – Please refer to Central Documentation Website to check validity
3. DESIGNATION
BA1500 – ( )
Example:
®
BA1500-8: Titanium alloy 6AL-4V nut, dia. code ½ inch, coated with Hi-Kote 4NC.
4. MARKING
Manufacturer symbol on the hexagon or the flange area (see Figure 1).
5. PROCUREMENT SPECIFICATION
The BA1500 nuts must meet all the inspection requirements of LISI AEROSPACE Product Specification
STR-TS01.
Technical
Issue
Center
PAGE 5/6 E
LISI AEROSPACE – Please refer to Central Documentation Website to check validity
Technical
Issue
Center
PAGE 6/6 E