Professional Documents
Culture Documents
Basic items
1.1. Basics
The name of person in charge who used once is memorized separately from
the object data and can be selected and input from the next time from next
time (Up to ten people are memorized recently, old ones are automatically
deleted).
To delete the stored contact name, with the list displayed, select it with the
cursor key or mouse pointer and press the [Del] key. On the confirmation
screen for deletion, select [Yes].
Building overview The number of spans and all floors can not be changed here once they are
Five. entered. If you want to change it, you can do with [ 1.2. Basic items 11. add /
delete layer / axis ] or mouse input ([ 7.16. Add / delete layer / axis ]).
The underground floor is the seismic intensity of the underground floor, and
the PH level is the seismic force due to the projected seismic intensity.
Underground floor and PH floor are not subject to judgment of calculation
route, examination of possession horizontal tolerance.
For the input of the basement floor number, PH level number, please enter
the number of floors up to the ordinary layer including the dummy layer.
In the case shown below, enter PH level number: 2, underground floor number:
2.
Please be aware of the number of nodes and the number of parts. For
details, refer to the explanation (calculation) [1.3.2 Size of building].
X direction span - 1 99 -
number
Y direction span - 1 99 -
number
Check the structure type to be used for the building or enter it by number.
When entering by number, in the mixed structure, enter the structure type
number and enter it with two or more digits. When CFT is used, S is also
automatically checked.
The structure type that can be selected is limited by license.
【Input example】
In the mixed structure of S and SRC "13"
In mixed structure of RC structure and SRC structure "23"
In the mixed structure of S, RC and SRC, "123"
In the mixed structure of S, SRC, CFT, "134"
The initial value of the bottom layer is always RC construction even if it is not
a mixed structure. If the subject structure is other than RC construction,
select it with [each layer main structure].
[Each layer- "In the preceding paragraph" 2: When made as other than RC construction "
based structure]
For each layer (floor), select the structure type that becomes the initial value of beams and
columns.
Layers are classified as shown below.
The structure type of the calculation route is selected in [ 1.2. Basic item 4. Calculation route -
Structure type ].
Regardless of the specification of each layer-based structure, the structure types checked in
the previous section can be mixed in the same layer.
Span length The position of the input span is called "street heart." In the initial state
the street heart and the member heart are in agreement. If they do not
match, enter the position of the member with [11. Movement of members].
When entering the deviation of the member, please input [10. deviation from
structure center].
The value of 10 or less is multiplied by 1000. For values less than or equal
to 10, please input by mouse input [ 7.16. Add / delete layer / axis ].
[Caution] For the reference span length and the standard floor height, refer to
the explanation (calculation) [1.4 Outline of calculation method].
The value of 10 or less is multiplied by 1000. For values less than or equal
to 10, please input by mouse input [ 7.16. Add / delete layer / axis ].
Adjustment for each layer can be entered in [12. Level adjustment of beam],
adjustment for each beam member can be entered in [ 3.8. Level adjustment of
beam ].
Automatic We automatically calculate the value obtained by averaging the gap between
calculation the member center of each beam and the standard floor height for each layer.
For the position of the beam center, consider [12. beam level adjustment],
[ 3.8. Beam level adjustment ].
Displacement If the center of the street and the center of the member do not match, enter
Ten. from structural the deviation between the street heart and the structural heart.
mind (frame unit) When looking at the plane, enter a positive value when the structural mind is
located on the right or above the street heart, and a negative value when it is
on the left or bottom.
Even if you enter a deviation from the structural mind, the parts will not
move.
Regardless of the position and members caused by the structural mind [11.
Movement of members], make the position on the whole floor consistent.
Automatic For each frame the position of the average deviation between the street heart
calculation and the column core is the structure heart.
11. Movement of Specify the position of the member, such as when aligning the surface of each
members (frame member.
unit) When you do not input the deviation of the member, the street heart and the
member center coincide.
In [ 3.7. Movement of members ], it is possible to select for each member.
Hold down Select the position of the member that - Select from list center
will hold down the distance to the street
heart.
12. Level adjustment In order to adjust the position of the beam, enter the beam level difference
of beam from [8. Standard floor height].
Hold down Select the position of the beam that will - Select from list Top
hold down the distance from the standard
floor height.
In the case of a haunch beam, it becomes the upper hanch when holding down
on the lower side, and becomes the lower hunch when the presser is on the
upper side.
1: bottom surface 2: top surface
Enter a positive value if the holding surface is above the standard floor height,
and a negative value if the holding surface is below.
13. Height from GL When the level of the ground floor (the mm -9999 9999 0
to 1st floor first floor) and the level of the ground
surface (GL) which is defined by the
standard floor height are different from
each other, enter the difference.
Enter a positive value if the first floor is above GL and a negative value when
it is below.
Building height of route judgment, building height of earthquake load (when
calculating the primary eigen period of design), building height of wind load
( Kz , Er calculation), and underground seismic intensity.
14. Parapet height Enter the height from the top layer mm 0 9999 0
defined by the standard floor height to the
top of the parapet ( Hpa ).
The building height (HROOT) used for route judgment shall be the height from
the GL to the parapet top end ( Hpa ).
The height (HT) used for the primary natural period is the height from the GL
to the top edge of the top floor of the general floor.
HROOT = Σ Hi + H gl + H pa
HT = ΣHi + Hgl
Σ Hi : Total floor height of general floor (basement floor, floor excluding PH
floor)
0 is automatically calculated by the maximum height of the parapet arranged
at the boundary between the general floor and the PH floor.
Loading, rigidity (according to [ 2.1.3.RC · SRC Column / Beam 1 4. Members
to be considered for rigidity ) ], input the parapet to be considered in the found
area of wind pressure with [ 7.7. Parapet ].
1.2. Basics
Select the basic form. We do not handle mixing of foundation and pile
foundation directly.
You can also select [ 13.1.1. Basic items 2. Basic form] (data is common).
1. Basic form When [ 13.1.1. Basic Items 1. Basic Considerations] is set to "to", you can
enter the basic shape and calculate the foundation.
When "do not do", input of the basic shape becomes unnecessary,
calculation of the foundation is not carried out.
When considering the foundation beam stress due to the ground pressure
in section calculation, please set " 13.1.1. Basic matter 1. Basic
consideration" to "to".
Direct basis
Place piling foundation
Ready-made pile foundation
"In the preceding paragraph as" direct foundation "when"
It deals with either independent foundation, cloth foundation, solid basis or
a mixture. However, when we assume [ 13.1.1. Basic Items 1. Basic
consideration] "to be" (basic eccentricity · pile head bending direct input
by input of basic beam stress) ", we treat only the independent foundation.
Independent foundation
Cloth foundation
Sticky foundation
Presence or
Specify the presence or absence of double slab for each layer.
absence of double
2. Check the layer to be double slab. The checked layers are divided up
slab
and down and can be placed on each floor.
Double slab
Restriction on
Enter the limit value used for judgment
interlaminar
3. of the calculation route with the - 120 999 200
deformation angle (1
reciprocal of the angle.
/ n)
Calculated route
Four.
Select the structure type to be used for judging the calculation route.
In route judgment of CFT structure, judgment of route 1-1, 1-2 is not
made.
S
RC
Structure type
SRC
CFT
[Caution] If you check multiple structural types with [ 1.1. Basic items 6.
Main structure ], it will be in the unspecified state. Be sure to select one
of the structure types.
Select the calculation route. Route
X direction When route 3 is selected, the calculation of [5. Horizontal load 1-1
Y direction bearing capacity] is automatically checked. Route
1-1
Route determination
6.
data
When not entering or entering 0, set it to the highest level of the standard
floor height.
[Caution] [Nodal vertical movement] is not taken into consideration.
When not input or when 0 is input, the maximum beam member length is
taken into account considering the movement of the joint.
Tower ratio It is used for judgment of calculation route 2.
When not entering or entering 0, it is taken as the sum of the floor area
that was placed.
8. Axis name Changing the input value will recalculate from the preparation calculation.
In the data input, result output, plotting, use the axis name X1,
X axis name
entered here. X2, ...
It is also possible to set the axis name using the next axis name
Y1,
Y axis name renumbering.
Y2, ...
Select the method to redo from the bottom and press the [Rewind] button
to update the axis name.
X1, X2, ...
When describing the position of a beam or a floor, use the name of a layer,
9. Layer name / name and when representing the position of a pillar or wall, use a floor name.
Changing the input value will recalculate from the preparation calculation.
In the data input, result output, plotting, use the layer name / 1 FL, 2
Layer name
floor name entered here. FL, ...
It is also possible to set the layer name and the layer name by 1F,
A floor name using the next layer name / rename rename. 2F, ...
If you select from the three below and press the [Rewind] button, the
layer name will be updated.
Select from the bottom two and press the [Rewind] button to update the
graduation.
Input > 2. Calculation condition > 2.1. Stiffness calculation condition > 1. RC · SRC shear wall
2.1. Stiffness calculation condition
1.RC · SRC Shear Wall
Criteria for judging Specify criteria for judging whether it will be earthquake resistant wall based
1. earthquake resistant on building shape and member shape disposition.
wall
Lower limit of wall Enter the minimum wall thickness of the mm 1 999 120
thickness earthquake resistant wall condition.
Opening condition Of the conditions of the earthquake resistant walls, it is decided whether to
judge the opening by the opening circumference ratio, or judge on the one with
the larger opening ratio and the opening length ratio.
r 0 ≦ 0.4
max (r 0 , L 0 / L) ≦ 0.4
here,
Handling of multiple Choose how to calculate h 0 L 0 , L 0 , h 0 when there are multiple openings
openings on one wall .
Envelope rectangle
It is regarded as one opening enveloped in a rectangle.
Equal area
It is the sum of the opening areas.
The method of h in Select the way to calculate the wall height (h) when calculating the opening
the opening circumference ratio (√h 0 L 0 / hL ) and the opening height ratio (h 0 / h).
circumference ratio Between center of beam
and the opening height
Wang Tian
ratio
Beam difference
In the next paragraph, take the space between the beams when the beam
difference is less than or equal to the difference between the beams input, and
take a beam girder when it exceeds.
Consideration of
2. sleeve wall attached
to accessory post
The ratio of the Enter the shear rigidity of the sleeve wall
sleeve wall to be attached to the accessory post of the earthquake
included in the cross- resistant wall at the ratio of inclusion in the shear
sectional area for deformation cross-sectional area of the shear wall.
shear deformation of
the wall
Increase rate ( φI , "According to the previous section" Based on the - 1 10000 100
φA ) rate of increase relative to the original section I 0 "
Enter the rate of increase relative to the stiffness
of the beam member cross section.
Input > 2. Calculation condition > 2.1. Stiffness calculation condition > 1. RC · SRC shear wall
2.1. Stiffness calculation condition
1.RC · SRC Shear Wall
Criteria for judging Specify criteria for judging whether it will be earthquake resistant wall based
1. earthquake resistant on building shape and member shape disposition.
wall
Lower limit of wall Enter the minimum wall thickness of the mm 1 999 120
thickness earthquake resistant wall condition.
Opening condition Of the conditions of the earthquake resistant walls, it is decided whether to
judge the opening by the opening circumference ratio, or judge on the one with
the larger opening ratio and the opening length ratio.
r 0 ≦ 0.4
max (r 0 , L 0 / L) ≦ 0.4
here,
Handling of multiple Choose how to calculate h 0 L 0 , L 0 , h 0 when there are multiple openings
openings on one wall .
Envelope rectangle
It is regarded as one opening enveloped in a rectangle.
Equal area
It is the sum of the opening areas.
Projected length × projected height (equivalent aperture)
h 0 L 0 is a rectangle with projection length and projection height. L 0 is the
projection length and h 0 is the projection height.
Projected length: Length when viewing multiple openings from the top (total
when the opening is far away)
Projection height: Height when looking at multiple openings from the side
(total when the opening is far away)
The method of h in Select the way to calculate the wall height (h) when calculating the opening
the opening circumference ratio (√h 0 L 0 / hL ) and the opening height ratio (h 0 / h).
circumference ratio Between center of beam
and the opening height
Wang Tian
ratio
Beam difference
In the next paragraph, take the space between the beams when the beam
difference is less than or equal to the difference between the beams input, and
take a beam girder when it exceeds.
Consideration of
2. sleeve wall attached
to accessory post
The ratio of the Enter the shear rigidity of the sleeve wall
sleeve wall to be attached to the accessory post of the earthquake
included in the cross-
sectional area for
shear deformation of resistant wall at the ratio of inclusion in the shear
the wall deformation cross-sectional area of the shear wall.
Evaluation of Including waist walls / vertical walls of half the height of the floor
3. stiffness of attached Depending on the rate of increase relative to the original section I 0
beam
Increase rate ( φI , "According to the previous section" Based on the - 1 10000 100
φA ) rate of increase relative to the original section I 0 "
Enter the rate of increase relative to the stiffness
of the beam member cross section.
Input > 2. Calculation condition > 2.1. Stiffness calculation condition > 3. RC · SRC column / beam 1
2.1. Stiffness calculation condition
3.RC · SRC Column / Beam 1
1. Calculation method of For the columns and beams of R / C structure / SRC structure, select
column / beam I the calculation method of the second moment of area.
Checkout method
Rough calculation
【Calculation method】
For beams, calculate I for the axis passing through the centroid of the cross wall with the waist
wall / vertical wall and floor.
For pillars, calculate I for the axis passing through the centroid of the cross section with sleeve
walls and perpendicular walls.
Columns and orthogonal walls consider shifts. Floor attachment will take into consideration
level adjustment of the beam.
[Approximate calculation method]
I and each of the I by the hanging wall / waist wall and I by the floor, add them together and
make it I of the section. In case of a pillar, only the sleeve wall is considered. Ignore the
orthogonal wall.
Calculation method of I "In the preceding paragraph" Absolute calculation method "When"
by waist wall · vertical Choose how to include the wall into the second moment of area.
wall (sleeve wall)
Calculate according to shape
Calculate according to the shape.
2. Calculation method of Select the method of adopting the cross sectional area for shear
column / beam A deformation and axial deformation respectively.
How to calculate A for Consider the floor (orthogonal wall) and the waist wall / vertical wall
shear deformation (sleeve wall)
Calculation method for Consider the floor (orthogonal wall) and the waist wall / vertical wall
axis deformation A (sleeve wall)
3. How to consider
stiffness by floor
How to calculate I by "[1. Calculation method of pillar / beam I]" When it is abbreviated
the floor method "When"
Choose how to include the floor in the second moment of area.
Depending on cooperation range
Increase rate with one "According to the preceding paragraph" - 1.00 9.99 1.50
side slab By growth rate "When"
Increase rate with slab "According to the preceding paragraph" - 1.00 9.99 2.00
on both sides By growth rate "When"
How to cooperate For the purpose of calculating the cooperation width of the floor with
(common to both I and respect to the girder, a selection is made as to whether to "set the
A) distance from the beam side surface to the side surface of the adjacent
material" between the small beams or the large beam, for the vertical
load, and the horizontal load I will.
In [2. Calculation method of column / beam A], the range of cooperation
when considering "floor (orthogonal wall) and waist wall · vertical wall
(sleeve wall)" is also based on this selection.
Small beam
Members to be Select whether or not to consider the rigidity of the connected parts.
Four. considered for rigidity
Parapet do not do
To
To
To
To
Thickness of waist wall Walls thinner than the minimum thickness mm 0 999 120
Five. · vertical wall · sleeve are not taken into consideration for rigidity
wall calculation.
Minimum thickness
Earthquake resistant walls are
considered for rigidity calculation
regardless of this designation.
Input > 2. Calculation condition > 2.1. Stiffness calculation condition > 4. RC · SRC column / beam 2
2.1. Stiffness calculation condition
4.RC · SRC Column / Beam 2
Calculation method of rigid area Specify for calculation of rigid area length.
1.
Processing of multiple openings Select handling when there are multiple openings.
Make it a rectangle
The maximum value λ of the Maximum value can be set for - 0.00 1.00 1.00
rigid region λ the rigid area length of
automatic calculation. Enter
this maximum value as the ratio
λ to the member length L.
Shape of column joint part panel Select whether or not to automatically calculate the shear
2. deformation area of the column-to-beam joint of concrete by
beam and column. Whether or not shear deformation of the joint
should be taken into account [ 2.3.1. Basic condition 3.
Choose the deformation of the joint panel ].
Individual designation ("9.9.1. Joint panel shape")
Consider only the junction specified in [ 9.9.1. Joining panel
shape ].
Automatic recognition
Specifying [ 9.9.1. Junction panel shape ] is valid even if it is
"automatic recognition" .
Handling of slits Select the handling of the wall when the slit is arranged in a
3. direction orthogonal to the member axis.
"Longitudinal slit (beam rigidity), Lateral direction slit (column
rigidity) input"
Do not consider walls
Input > 2. Calculation condition > 2.1. Stiffness calculation condition > 5. S member
2.1. Stiffness calculation condition
5. S member
Calculation method of beam I S Select the method of rigidity evaluation by the floor against the
1 by floor beam.
. Do not consider the floor
Increase rate with one side "When you enter" growth - 1.00 9.99 1.00
slab rate input "in the previous
section"
Increase rate with slab on both "When you enter" growth - 1.00 9.99 1.00
sides rate input "in the previous
section"
How to cooperate For the purpose of calculating the cooperation width of the floor
with respect to the girder, a selection is made as to whether to "set
the distance from the beam side surface to the side surface of the
adjacent material" between the small beams or the large beam, for
the vertical load, and the horizontal load I will.
"Input when vertical loading and horizontal loading respectively"
Maouma
Small beam
Consideration of cooperation Choose whether to consider cantilevered floor for rigidity of beam.
width of cantilever floor do not do
To
Recognition of buckling length Specify whether to treat dummy material (dummy small beam /
2 dummy girder / dummy pillar) attached to the member as a stiffener.
. Do not use dummy material as stiffener
Shape of column joint part Choose whether to automatically calculate the shape of the joint
3 panel panel of the steel frame with beams and columns. Whether or not
. to consider the shear deformation of the joint is selected by [ 2.3.1.
Basic condition 3. Consideration of joint deformation of joint ]. In
the elasto-plastic analysis, whether or not shear yield is to be
considered is selected in [ 2.8.5.S Ultimate Strength 3. Junction
Panel - Shear Yielding Determination ].
Individual designation ("9.9.1. Joint panel shape")
Consider only the junction specified in [ 9.9.1. Joining panel
shape ].
Automatic recognition
Specifying [ 9.9.1. Junction panel shape ] is valid even if it is
"automatic recognition" .
1. Treatment of In calculating the nodal weight (vertical load), select handling of pillar self weight.
pillar own For earthquake weight calculations, regardless of this selection, always distribute
weight to the upper and lower floors at the center of the floor.
Distribute to the upper and lower floors at the center of the floor height (middle
between the beam ends)
2. Treatment of In calculation of node weight (vertical load), select handling of wall self weight.
wall self weight This treatment can be selected for each wall in [ 7.3. Wall (Slit) Weight Handling ].
For earthquake weight calculations, regardless of this selection, always distribute
to the upper and lower floors at the center of the floor.
On the wall on which the three-way slit is placed, regardless of this choice, we
shall bear all the upper beams.
Distribute to the upper and lower floors at the center of the floor height
3. Beam CM0Q0 In handling CM0Q0 of beam, select handling of wall load. This treatment can be
Calculation, selected for each wall in [ 7.3. Wall (Slit) Weight Handling ].
handling of wall Consider to Beam CM0Q0
To
Calculation of "C" and "Q", the member and the load are divided into the rigid region portion
Five. load term and the flexible portion, the C and Q of the flexible portion are determined, the
considering rigid region portion is regarded as a cantilever beam, and the aforementioned C, Q
rigid region The moment of the original end when it is made to act as an additional external
force becomes the fixed end moment (Kenji Saito [Architectural Structural
Mechanics of Science and Engineering] Science and Engineering Book, June
1974).
do not do
To
6. Premium rate "S pillar, CFT pillar, S large girder, S small - 0.00 2.00 1.00
of steel frame beam, vertical brace, manufacturer's
weight product brace Each input "
Enter the premium rate for the weight calculated from the steel cross section.
Weight of fittings, bolts, etc. are not calculated (excluding maker product brace).
By entering the premium rate, these can be taken into account for convenience.
Also, when inputting the weight of a small beam or vertical brace evenly to the
floor or wall, you can ignore the weight by setting the magnification to 0.
[Caution] When 0 is set, the steel weight is not added to its own weight.
Input > 2. Calculation condition > 2.3. Stress calculation condition > 1. Basic condition
2.3. Stress calculation condition
1. Basic condition
To
2. Consideration of Select whether or not to consider deformation due to the axial force of the
column deformation column.
When not doing it, analyze it by setting the cross-sectional area for column
deformation to 1000 times.
"Input when vertical loading and horizontal loading respectively"
do not do
To
To
Consider Choose whether to consider bending rigidity and shear rigidity in the
Four. deformation in beam horizontal direction of the beam.
horizontal plane Individual designation is specified by [9.4. Stiffness change rate].
【Caution】 In the program, we do not calculate section etc taking into
consideration the bending moment and shear force in the horizontal plane of
the beam caused by considering the rigidity in the horizontal plane.
Consider separately, for example, the examination and the combination of
forces in the horizontal plane.
"Input when vertical loading and horizontal loading respectively"
Set rigidity to 0 ( Iz = 0, Asy = 0)
The rigidity in the horizontal plane is not taken into consideration. When
considering some beams , specify [ 9.4. Stiffness change rate 1. Beam ].
To
6. Handling of braces Choose whether to consider vertical brace in stress analysis at vertical
at vertical load load.
Regardless of this selection, when compressive force is applied to the
brace which is effective only for tension, disable the brace and repeat stress
analysis. Enter the number of times of this processing in [7. Fulcrum rise /
tension brace - convergence calculation number].
Do not bear the axial force
7. Fulcrum floating /
tension brace
Depending on the number of fulcrums or the like, the lifting process may
become unstable and stress analysis may be interrupted.
In addition, although the stress analysis is carried out under conditions
such as the rigid floor assumption based on the deformation by horizontal
force and the model of the wall, if the influence in the vertical direction
becomes large by the floating process, judgment and evaluation are not
carried out .
The designer properly judges and enter the convergence calculation
number.
Input > 2. Calculation condition > 2.3. Stress calculation condition > 2. Stress analysis method
2.3. Stress calculation condition
2. Stress analysis method
item Description
unit lower upper initial
limit limit value
1. Analysis at short Select whether to use stress analysis method at primary design earthquake
term design as elastic analysis or elastoplastic analysis by load increment method.
earthquake [Caution] When "Elasto-Plastic Analysis" is selected, the reinforcement input
is indispensable.
Elastic Analysis
Even elastic analysis, you can consider lifting up the fulcrum and processing to
invalidate the tension brace when compressing.
Elastoplastic Analysis
Select to evaluate the nonlinearity of members and fulcrum.
2. Load increment "When we say" Elastic plastic analysis "in the previous section"
Number of steps "When applying force X and force Y Each input " - Ten 100
to seismic power 10000
for short term
The seismic force / input value for short-term design is the increment of load
design
per step. Therefore, if you increase the number n of steps up to the seismic
force for short-term design, the increment becomes finer and the accuracy
becomes higher, but the analysis time becomes longer.
How to divide Select the division method of incremental load increments (step increments of
the incremental load increments) in one step.
amount When "arithmetic progression division" is adopted, it is possible to gradually
refine incremental load increments and improve accuracy at the end of
analysis. However, if cracks occur at an early stage of analysis, the precision
may decline conversely.
"When applying force X and force Y Each input "
Equally divided
Arithmetic group division
To
To
RC
SRC
CFT
Calculation of rigidity If the vertical members (pillars, earthquake resistant walls, braces) are not
1. position tilted with respect to the operating angle of the seismic force, the result is
the same regardless of which is selected.
Theoretical formula
Reference manual
Theoretical formula
When this floor is a rigid floor, it is assumed that the position where horizontal force is applied at
any angle does not rotate the rigid floor and pure translational displacement occurs (this calculation
method is called the theoretical equation for convenience in this program ).
Reference: Toshio Shiga "Vibration of Structures - University Lecture Building Structure 2"
Kyoritsu Publishing Co., Ltd., October 1982
【Reference Manual】
We consider the rigidity in the X direction and the Y direction independently and make the center of
each stiffness rigid.
Calculation of the Choose whether to adopt column axial force or approximate axial force to
2. center of gravity calculate the center of gravity position.
position Long-term axial force
Use the axial force of the column, the axial force of the earthquake resistant
wall, and the vertical force of the brace.
Horizontal stiffness of It is used to calculate the horizontal rigidity Dw ' of the intraframe surface
3. miscellaneous wall miscellaneous wall in the previous section .
[N value of in-plane Magnification for horizontal stiffness per unit area of standard column of
miscellaneous wall] in-plane miscellaneous wall
[Caution] When 0 is input, the stiffness of the in-plane miscellaneous wall is not taken into
consideration.
Specify n values on each floor, one wall in the X direction and one wall in the Y direction.
When " External force distribution is calculated for each rigid base" by [ 5.8. Earthquake load -
seismic force of rigid floor], it becomes n value for each rigid base.
It can not be entered by force direction.
The three-way slit wall is not included in the horizontal rigidity Dw '.
How to specify Select the standard column designation method. The initial value is
"average".
1: average
Automatically calculates from the sum of horizontal stiffness and cross
sectional area of RC column and SRC column of the relevant floor. There
is no subsequent input.
2: position
Select the position of the standard pillar.
3: Horizontal rigidity
Enter the horizontal rigidity per unit area.