Professional Documents
Culture Documents
REQUEST A QUOTE
The Weka CuNi 90/10 boxcooler has natural anti-fouling capabilities. To keep the boxcooler protected from welding-
and stray currents and keep the natural anti-fouling capabilities, Weka developed the Weka Guard and the Weka
Protector.
The WEKA Guard is a device which protects the Boxcooler from being damaged by welding currents. The WEKA Guard
must be connected to the cooler and to the ship’s hull during the newbuilding process of the ship when the ship-based
electrical supply is not yet available. If not installed, the Boxcooler may suffer severe corrosion due to the welding
currents.
The WEKA Protector is a small device, which is placed in the vicinity of the Boxcooler to be protected. The WEKA
Protector will protect the Boxcooler from being damaged by ICCP-systems or stray currents originating from sacrificial
anodes. It also protects the boxcooler against marine growth by stimulating the natural anti-fouling capabilities of the
Copper-Nickel boxcooler. The WEKA Protector comes in three variants, the single-, dual-and multi-protector.
After installation of the Weka boxcooler, it need’s to be checked if it is installed correctly by measuring the electrical
resistance or electrical potential.
Recent posts
Bureau Veritas successful classification for Weka galvanized steel cooler
Shipping-Technics-Logistics-Kalkar 2021
Weka Marine has relocated her office
Weka Marine Steel cooler delivery
Weka Marine is attending the Icelandic Fisheries Exhibition
Boxcoolers
Steel Coolers
Grid Coolers
Services
FOLLOW US
CONTACT US
Weka Marine | All rights reserved 2020 | +31 180 516588 | info@wekamarine.com