Professional Documents
Culture Documents
reviewer2@nptel.iitm.ac.in ▼
Unit 7 - Week 6
Course
outline Week 6 Assignment
The due date for submitting this assignment has passed. Due on 2018-03-21, 23:59 IST.
How to access As per our records you have not submitted this assignment.
the portal
This assignment contains 10 questions. Each question has individual marks.
Week 1
1) When a two-degree-of-freedom system is subjected to a harmonic force, the 1 point
Week 2
system vibrates at the
frequency of applied force
Week 3
smaller natural frequency
Week 4 larger natural frequency
none
Week 5
No, the answer is incorrect.
Score: 0
Week 6
Accepted Answers:
Lesson 1 - frequency of applied force
Undamped free
vibration 2) Find the natural frequencies of the following system for k1 = k2 = k3 = k, 2 points
Lesson 2 - and m1 = m2 = m
Principal modes
of vibration
Lesson 3 -
Combined ω1 = √(𝑘/𝑚), ω2 = √(3𝑘/𝑚)
rectilinear and
angular modes
ω1 = √(2𝑘/𝑚), ω2 = √(3𝑘/𝑚)
Lesson 4 -
Damped free
vibration ω1 = √(3𝑘/𝑚), ω2 = √(2𝑘/𝑚)
Lesson 5 -
Undamped
ω1 = √(3𝑘/2𝑚), ω2 = √(2𝑘/𝑚)
forced vibration
with harmonic No, the answer is incorrect.
excitation
Score: 0
Quiz : Week 6 Accepted Answers:
Assignment
ω1 = √(𝑘/𝑚), ω2 = √(3𝑘/𝑚)
Feedback Form
For Week 6 3) Using the figure of Q.02. Find the natural frequencies (rad/second) of the 2 points
New Lesson
system shown in figure for m1 = 2 kg, m2 = 5 kg, k1 = k2 = 3 N/m, and k3 = 4 N/m.
Introduction to
mechanical
vibration : Week
ω1 = 0.2, ω2 = 3.854
6 - Solution
https://onlinecourses-archive.nptel.ac.in/noc18_me37/unit?unit=41&assessment=78 1/4
27/07/2020 Introduction to Mechanical Vibration - - Unit 7 - Week 6
ω1 = 0.979, ω2 = 1.854
Week 8
ω1 = 4.23, ω2 = 9.27
DOWNLOAD
VIDEOS
No, the answer is incorrect.
Score: 0
Accepted Answers:
ω1 = 0.979, ω2 = 1.854
4) Find the natural frequency of the system as shown in the figure below for 3 points
m1 = 3 kg, m2 = 6 kg, and k = 250 N/m.
ω1 = 0, ω2 = 11.18
ω1 = 0, ω2 = 9.57
ω1 = 4, ω2 = 12.52
ω1 = 0, ω2 = 17.32
5) Using the figure of Q.4. Find the mode shape of the system 3 points
1 1
𝑋1 = , 𝑋2 =
[ 1.5 ] [ −0.78 ]
1 1
, 𝑋2 =
[ 1.5 ] [ −0.51 ]
1 1
, 𝑋2 =
[ 0.86 ] [ −0.78 ]
1 1
, 𝑋2 =
[1] [ −0.87 ]
6) A machine tool, having a mass of 1000 kg and a mass moment of inertia of J0 = 3 points
300 kg-m2 is supported on elastic supports, as shown in Figure given below. If the
stiffness of the support is given by 3000 N/mm and 2000 N/mm, and the supports are
located at 0.5 m and 0.8 m, find the natural frequencies.
https://onlinecourses-archive.nptel.ac.in/noc18_me37/unit?unit=41&assessment=78 2/4
27/07/2020 Introduction to Mechanical Vibration - - Unit 7 - Week 6
ω1 = 110, ω2 = 40.18
ω1 = 50, ω2 = 39.57
ω1 = 70.57, ω2 = 82.373
ω1 = 0, ω2 = 85.32
7) Using Q.6, find the mode shapes of the machine tool. 3 points
1 1
𝑋1 = , 𝑋2 =
[ 1.5 ] [ −0.78 ]
1 1
𝑋1 = , 𝑋2 =
[ −5.34 ] [ 0.056 ]
1 1
𝑋1 = , 𝑋2 =
[ 0.86 ] [ −0.75 ]
1 1
𝑋1 = , 𝑋2 =
[1] [ −0.87 ]
8) Figure shows a vibrating system having two degree of freedom. The ratio of 3 points
amplitudes of the motion of 𝑚 𝑎𝑚𝑑 𝑚 for the two mode of the vibration. Given:
1 2
-0.765, 0.696
2.56, 0.456
6.450, 0.969
0.569, 4.547
No, the answer is incorrect.
Score: 0
Accepted Answers:
-0.765, 0.696
9) In the system shown in the figure, the mass m1 is excited by a harmonic force 3 points
40sin(4πt) N. Find the forced amplitude (in mm) of each mass for m1= 15 kg, m2= 10 kg,
k1= 6000 N/m, and k2=1500 N/m.
Funded by
Powered by
https://onlinecourses-archive.nptel.ac.in/noc18_me37/unit?unit=41&assessment=78 4/4