Professional Documents
Culture Documents
;
;
Plate geometry
sblt = 3"
sblt = 3"
sblt = 3"
Le = 1.75"
d1 = 4"
w s = 2"
1.5"
gageblt = 3"
we = 6"
ws = 2"
;
;
Input Summary
;Loading;
Beam moment; Mr = 209 kip_ft
Project Job Ref.
ZIPLINE AT CLAREMONT, ST. ANN
Section Sheet no./rev.
2
P. STEWART AND ASSOCIATES Calc. by Date Chk'd by Date App'd by Date
J. GILMAN 14/07/2020 P. STEWART
Axial load on the cut-out plate; Pr_bf = Mr/(d_bm + tplt) = 224.933 kips
;Cut-out plate;
Thickness of the cut-out plate; tplt = 0.75 in
Width of the plate at the cut-out; ws = 2 in
Width of the plate at the end; we = 6 in
Edge distance at the end of the plate; Le = 1.75 in
Plate minimum yield strength; Fy_plt = 36 ksi
Plate tensile strength; Fu_plt= 58 ksi;
Tensile yielding on the plate width per AISC 360-10 Section D2(a)
Gross area of the plate; Ag = tplt * (B + 2*ws) = 10.50 in2
Resistance factor for tensile yielding ; ty = 0.90;
Tensile rupture on the plate width per AISC 360-10 Section D2(b)
Net area of the plate; An = Ag - tplt * 2*(dhole_blt + ldamage) = 8.81 in2
Resistance factor for tensile rupture ; tr = 0.75;
Design Checks
Design bearing strength for bolt group; Rc_br_plt = bb * Rn_br_plt = 1467.8 kips
PASS - The design bearing strength of the plate exceeds the required shear strength.;
Nominal bearing strength for interior bolt; rn_hbr_bm = MIN(1.2* lch_bm * tf_bm * Fu_bm,2.4* dia_blt* tf_bm * Fu_bm) =
116.34 kips;
Nominal bearing strength for bolt group; Rn_br_bm = 2*rn_ebr_bm + 2*(Nblt - 1)*rn_hbr_bm = 938.26 kips;
Resistance factor for bolt bearing; bb = 2.00;
Design bearing strength for bolt group; Rc_br_bm = bb * Rn_br_bm = 1876.5 kips
PASS - The design bearing strength of the beam web exceeds the required shear strength.;
Block shear in the beam flange per AISC 360-10 Section J4.3
Gross length subject to shear; Lgv_BS_BM = Lep + (Nblt-1)*sblt = 13.000 in
Gross area subject to shear; Agv_BS_BM = Lgv_BS_BM * tf_bm = 10.01 in2
Net area subject to shear; Anv_BS_BM = Agv_BS_BM - ((Nblt-0.5)*( lhole_blt + ldamage))*tf_bm ;
Anv_BS_BM = 6.98 in2
Net area subject to tension; Ant_BS_BM = (2*Let - (dhole_blt + ldamage))*tf_bm ;
Ant_BS_BM = 4.60 in2
Reduction factor for nonuniform stress; Ubs = 1.000; for one row of bolts; (See Commentary on Section J4.3)
Nominal block shear strength: Shear rupture on the net section;
Rn_bs_sr_bm = 0.6*Fu_plt*Anv_BS_BM + Ubs*Fu_plt*Ant_BS_BM = 509.6 kips
Nominal block shear strength: Shear yield on the gross section;
Rn_bs_sy_bm = 0.6*Fy_plt*Agv_BS_BM + Ubs*Fu_plt*Ant_BS_BM = 483.0 kips
Nominal block shear strength; Rn_bs_bm = MIN(Rn_bs_sr_bm, Rn_bs_sy_bm) = 483.0 kips
Resistance factor ; bs = 2.00;
PASS - The design block shear strength exceeds the required shear strength.;
;;