Professional Documents
Culture Documents
PRO CURVE LINE are a range of profiles that may be curved/shaped, with a special system of perforations allowing them to be bent so that particular geometric
shapes may be easily obtained in situ. This allows decorative patterns to be created at will according to technical and aesthetic requirements. The profiles in
the PRO CURVE LINE may be used as transition or edging profiles or to create joining and expansion joints on any type of ceramic, parquet, wood, laminate/
melamine coated wood, marble, carpeted, Palladian, Venetian floor, etc.
The profiles are made in AISI 304/1.4301-V2A stainless steel, aluminium and brass and may be easily shaped by using the PROCURVE MACHINE to bend the
profiles mechanically.
PROTERMINAL PROTERMINAL CURVE are a range of edging and joining profiles that may be curved/shaped, with a special
2017
system of perforations allowing them to be bent so that particular geometric shapes may be easily obtained in
CURVE situ. This allows decorative patterns to be created at will according to technical and aesthetic requirements and
with a separation of 3 mm. The product is made in stainless steel AISI 304/1.4301-V2A in various heights (6, 8, 10
STAINLESS STEEL AISI 304/1.4301-V2A and 12,5 mm) in 2.7 m bars.
CURVABLE
PTACCV 06 3
H 6 mm
PTACCV 08
H 8 mm
PTACCV 10
H 10 mm
PTACCV 125
H 12,5 mm
POLISHED STAINLESS STEEL AISI 304/1.4301-V2A with protective film COLOURS
bar length 2,7 lm - pack. 20 Pcs - 54 lm - 10/10 mm
Article H mm
PTACCV 15
PTACCV 06 6
PTACCV 08 8 AC - Polished stainless steel
AISI 304/1.4301-V2A
H 15 mm PTACCV 10 10
PTACCV 125 12,5
PTACCV 15 15
PTACCV 20 PTACCV 20 20
H 20 mm
EXEMPLES OF LAYING
LAYING INSTRUCTIONS
1. Choose the “PROTERMINAL CURVE” with the required height and
material. 2. Cut the profile to the necessary length, calculating the
total length. 3. Bend the profile mechanically with the PROCURVE
MACHINE. 4. If necessary fix with screws and screw anchors or simply
insert the punched base under the floor laid with the same adhesive.
If it is used as a joining profile, bring each floor to the edge of the
profile.
3
PTONCV 06
H 6 mm
PTONCV 08
H 8 mm
PTONCV 10
H 10 mm
PTONCV 125
NATURAL BRASS CURVABLE thermo packed 10pcs EXAMPLES AND INSTRUCTIONS FOR LAYING METHODS H 12,5 mm
bar length 2,7 lm - pack. 40 Pcs - 108 lm (H:15; 20 mm - 54 lm)
Article H mm
PTONCV 06 6
PTONCV 15
PTONCV 08 8
PTONCV 10 10 H 15 mm
PTONCV 125 12,5
PTONCV 15 15 1. Choose the “PROTERMINAL CURVE” in the required height and
PTONCV 20 20 material. 2. Cut the profile to the necessary length, calculating the
total length. 3. Bend the profile mechanically with the PROCURVE PTONCV 20
COLOURS MACHINE. 4. If necessary fix with screws and screw anchors or simply
insert the punched base under the floor laid with the same adhesive.
Any oxidation marks may be easily removed with specific chemical
products (Sidol-Smac, etc.). If it is used as a joining profile, bring each H 20 mm
floor to the edge of the profile.
ON - Natural brass
PROTERMINAL CURVE are a range of edging and joining profiles that may be curved/shaped. They feature
a special system of perforations allowing them to be bent easily so that particular geometric shapes may be PROTERMINAL
2017
easily obtained in situ. This allows decorative patterns to be created at will according to technical and aesthetic
requirements and with a separation of 3 mm of sandable profile. The product is made in natural aluminium in 2.7 CURVE
m bars and heights of 6, 8, 10, 12.5, 15 and 20 mm. NATURAL ALUMINIUM
CURVABLE
PTANCV 06 3
H 6 mm
PTANCV 08
H 8 mm
PTANCV 10
H 10 mm
PTANCV 125
NATURAL ALUMINIUM CURVABLE thermo packed 10 Pcs EXEMPLES OF LAYING (for laying instructions, see above) H 12,5 mm
bar length 2,7 lm - pack. 40 Pcs - 108 lm
Article H mm
PTANCV 06 6 PTANCV 15
PTANCV 08 8
PTANCV 10 10 H 15 mm
H 20 mm
AN - Natural aluminium
173
2017
PROELEGANT CURVE are a range of edging and joining profiles that may be curved/shaped. They feature a special
system of perforations allowing them to be bent easily so that particular geometric shapes may be easily obtained PROELEGANT
in situ. This allows decorative patterns to be created at will according to technical and aesthetic requirements and
with a separation of 6 mm of sandable profile. The product is made in natural brass in 2.7 m bars and heights of CURVE
8-10-12.5 and 14 mm. NATURAL BRASS
CURVABLE
PELONCV 08 6
H 8 mm
PELONCV 10
H 10 mm
PELONCV 125
H 12,5 mm
PELONCV 08 8
PELONCV 10 10 ON - Natural brass
PELONCV 125 12,5
PELONCV 14 14
EXAMPLES AND INSTRUCTIONS FOR LAYING METHODS
PROELEGANT CURVE are a range of edging and joining profiles that may be curved/shaped. They feature a special
system of perforations allowing them to be bent easily so that particular geometric shapes may be easily obtained PROELEGANT
in situ. This allows decorative patterns to be created at will according to technical and aesthetic requirements and
with a separation of 6 mm of sandable profile. The product is made in silver anodised aluminium in 2.7 m bars CURVE
and heights of 8-10-12.5 mm. ANODISED SILVER ALUMINIUM
2017
CURVABLE
6
PELAACV 08
H 8 mm
PELAACV 10
H 10 mm
PELAACV 125
H 12,5 mm
175
PROFINAL CURVE PROFINAL CURVE are a range of edging and joining profiles that may be curved/shaped. They feature a special
system of perforations allowing them to be bent easily so that particular geometric shapes may be easily obtained
in situ. This allows decorative patterns to be created at will according to technical and aesthetic requirements and
with a separation of 8 mm of sandable profile. The product is made in natural brass in 2.7 m bars and heights of
NATURAL BRASS 8, 10 and 12.5 mm.
CURVABLE
PRFONCV 08
H 8 mm
PRFONCV 10
H 10 mm
PRFONCV 125
H 12,5 mm
2017
material. 2. Cut the profile to the necessary length, calculating the
total length. 3. Bend the profile mechanically with the PROCURVE
MACHINE. 4. If necessary fix with screws and screw anchors or
simply insert the punched base under the floor laid with the same
adhesive. Any oxidation marks may be easily removed with specific
chemical products (Sidol-Smac, etc.). If it is used as a joining profile,
bring each floor to the edge of the profile.
PROFINAL CURVE PROFINAL CURVE are a range of edging and joining profiles that may be curved/shaped. They feature a special
system of perforations allowing them to be bent easily so that particular geometric shapes may be easily obtained
in situ. This allows decorative patterns to be created at will according to technical and aesthetic requirements and
with a separation of 8 mm of sandable profile. The product is made in silver anodised aluminium in 2.7 m bars
ANODISED SILVER ALUMINIUM and heights of 8, 10 and 12.5 mm.
CURVABLE
PRFAACV 08
H 8 mm
PRFAACV 10
H 10 mm
PRFAACV 125
H 12,5 mm
PJONCV 08
H 8 mm
PJONCV 10
H 10 mm
NATURAL BRASS CURVABLE thermo packed 5 Pcs COLOURS EXAMPLES AND INSTRUCTIONS FOR LAYING METHODS
bar length 2,7 lm - pack. 20 Pcs - 54 lm
Article H mm
PJONCV 08 8
PJONCV 10 10 ON - Natural brass
PROJOLLY CURVE is a range of terminal transition profiles that may be curved/shaped, with a special system of
perforations allowing it to be bent so that particular geometric shapes may be easily obtained in situ. This allows PROJOLLY
decorative patterns to be created at will according to technical and aesthetic requirements. It is made in anodised
aluminium, height H 8 -H 10mm, length 2.7 lm. CURVE
ANODISED SILVER ALUMINIUM
CURVABLE
2017
PJAACV 08
H 8 mm
PJAACV 10
H 10 mm
ANODISED SILVER ALUMINIUM CURVABLE thermo packed COLOURS EXAMPLES AND INSTRUCTIONS FOR LAYING METHODS
bar length 2,7 lm - pack. 20 Pcs - 54 lm
Article H mm
PJAACV 08 8
PJAACV 10 10 AA - Anodised silver alum.
PINT... CV 07 15 mm
H 7 mm
PINT... CV 09
H 9 mm
PINT... CV 11
H 11 mm
ANODISED SILVER ALUMINIUM CURVABLE thermo packed ALUMINIUM 10 WOOD FINISHES thermo packed
PINT... CV 15 bar length 2,7 lm - pack. 20 Pcs - 54 lm bar length 2,7 lm - pack. 20 Pcs - 54 lm
Article H mm Article H mm
H 15 mm PINTAACV 07 7 PINT... CV 09 9
PINTAACV 09 9 PINT... CV 15 15
PINTAACV 11 11 Available in the wood finishes: 04W-05W-07W-08W-09W-10W-
11W-28W-29W-30W.
PINTAACV 15 15 The code of the selected colour must be added to the article code.
29 mm E.g.: PINT... CV 09 (chosen finish Dark beech) PINT04W CV 09.
2017
05W - Light oak 07W - Light cherry 08W - Dark cherry 09W - Red walnut
AA - Anodised silver alum. 04W - Dark beech
(strip) (strip) (board) (merbau-apple-walnut)
ON DEMAND
1. Choose the “TERMINAL CURVE” in the required height and minimum
material. 2. Cut the profile to the necessary length, calculating the quantity 500 lm
total length. 3. Bend the profile mechanically with the PROCURVE 10W - Wengé
MACHINE. 4. If necessary fix with screws and screw anchors or 11W - Bleached decapè 28W - Aspen oak 29W - White oak 30W - Grey oak AO - Anodised gold alum.
(panga panga-wengè)
simply insert the punched base under the floor laid with the same
adhesive.
= On demand, price and delivery time to be agreed.
PROCOVER PROCOVER is a joint-cover profile in anodised aluminium and aluminium covered with a very strong film
available in 10 wood finishes. It is applied at the end of laying two adjoining floors with the same height, having
left a 6 - 24 mm gap between the two floors set in a thin bed of adhesive. It protects the outside edges of the
floor/covering. It is easy to lay and attractive. The design of the profile with lower vertical arrowhead part allows
ANODISED SILVER ALUMINIUM excellent anchorage with the silicone/adhesive.
AND 10 WOOD FINISHES – CURVABLE
PCRAA 149 14 mm
PCR... 149
H 9 mm
ANODISED SILVER ALUMINIUM CURVABLE thermo packed ALUMINIUM 10 WOOD FINISHES thermo packed
bar length 2,7 lm - pack. 40 Pcs - 108 lm bar length 2,7 lm - pack. 40 Pcs - 108 lm
Article L x H mm
1. Choose the “PROCOVER” with the width suitable for the gap Article H mm
between the two floors to be joined, taking into consideration PCR... 149 14 x 9
PCRAA 149 (Pack. 108 lm) 14 x 9
2/3 mm side lap. 2. Fill the gap with single-pack silicone or with Available in the wood finishes: 4W-05W-07W-08W-09W-10W-11W-
the adhesive used for laying the floor. 3. Bury the profile into the PCRAO 149 14 x 9 28W-29W-30W.
adhesive, making sure that both side laps of the profile rest on the The code of the selected colour must be added to the article code.
coverings to be joined. THE WHOLE PROCOVER RANGE ON PAGES 90-91.
E.g.: PCR...149 (chosen finish Dark beech) PCR 04W 149.
COLOURS
05W - Light oak 07W - Light cherry 08W - Dark cherry 09W - Red walnut
AA - Anodised silver alum. 04W - Dark beech
(strip) (strip) (board) (merbau-apple-walnut)
ON DEMAND
minimum
quantity 500 lm
10W - Wengé
11W - Bleached decapè 28W - Aspen oak 29W - White oak 30W - Grey oak AO - Anodised gold alum.
(panga panga-wengè)
178
PROSLIDER CURVE is a range of transition profiles that may be curved/shaped, with a special system of
perforations allowing it to be bent so that particular geometric shapes may be easily obtained in situ. This allows PROSLIDER
decorative patterns to be created at will according to technical and aesthetic requirements.
Recommended for joining floating floors in wood, melamine laminated wood and ceramics. It is made in natural CURVE
brass in various heights, length 2.7 lm. NATURAL BRASS
CURVABLE
PDONCV 08 8
PDONCV 10 10
PDONCV 10
COLOURS
H 10 mm
ON - Natural brass
EXEMPLES OF LAYING
LAYING INSTRUCTIONS
1. Choose the “PROSLIDER CURVE” in the required height and material.
2. Cut the profile to the necessary length, calculating the total length.
3. Bend the profile mechanically with the PROCURVE MACHINE.
4. If necessary fix with screws and screw anchors, if used for floating
floors in melamine/laminated wood, or simply insert the punched
base under the floor laid with the same adhesive.
PROSLIDER CURVE is a range of transition profiles that may be curved/shaped, with a special system of
perforations allowing it to be bent so that particular geometric shapes may be easily obtained in situ. This allows PROSLIDER
decorative patterns to be created at will according to technical and aesthetic requirements.
Recommended for joining floating floors in wood, melamine laminated wood and ceramics. It is made in anodised CURVE
aluminium in various heights, length 2.7 lm. ANODISED SILVER ALUMINIUM
CURVABLE
PDAACV 08 8
PDAACV 10 10
PDAACV 10
COLOURS
H 10 mm
PROCURVE MACHINE is a manual profile bending machine for profiles of the CURVE SERIES.
PROCURVE
MACHINE
179