Professional Documents
Culture Documents
Bosch
ABS/TCS
System
Student Manual
Performance Objectives:
The purpose of this activity is to gain a familiarity with the component parts of the ABS/TCS
System as to their location and purpose.
References:
Bosch 5 Series ABS/TCS Reference Book
Overview:
1. List the three functions of the components of the system.
a. monitor y control electrónico
b. fuente de alimentación y protección del circuito
c. control hidraulico
Components Introduction:
2. Identify the components in the following figure.
EBTCM
Válvula BPM LAMPARAS DE ADVERTENCIA SENSOR DENTADO SENSOR DE VELOCIDAD
ABS Y TCS
DE RUEDAS
Electronic Monitor and Control:
3. Signals that come from each wheel that represent the wheel’s rotational speed are
generated by the sensor de velocidad de ruedas .
5. List the four solenoids that are outputs from the EBTCM.
a. válvula de entrada
b. válvula de salida
c. Válvula de aislamiento
d. Válvula de presion
10 Amp
Hydraulic System:
7. Identify the components in the following figure.
sensor de velocidad de
la rueda trasera derecha
interruptores de freno
EBCM Y EBTCM
EBCM/BPMV
BPMV
Component Locations:
8. Identify the Rear Axle Speed Sensor in the following figure.
Conclusion:
Components of the ABS/TCS System are located throughout the vehicle. Location and type of
component vary depending on the body model being serviced.
Activity 2
Locate and identify in the above figure the following listed items:
• RE Prime Solenoid • LF Sensor
• Pump Motor • Torque Request Indicator
• Wheel Select Switch • Magnasteer Indicator
• Road Conditions Select Switch • EBTCM
• ABS System Active/Inactive Switch • Ignition Switch
• Speedometer • RR Hold Solenoid
• Gas Pedal • TCS Active Indicator
• Brake Pedal • RR Release Solenoid
• Starting/Stopping Distance Readout