OIL requires the services of EPC (Engineering, Procurement
and Construction) contractor for the Oil Collecting Station at Barekuri in accordance with the given Terms of Reference. This section establishes the scope and schedule for the work to be performed by the EPC contractor and describes the guidelines, instructions etc., which the EPC shall satisfy or adhere to in the performance of the work. Basic Engineering & Front End Engineering Design (FEED) for the above facility to establish the system requirements considering entire life of the field including the process description , basic scheme of the system, P&ID’s Soil Investigation, Soil Liquefaction Effect, Topographical survey etc have already been firmed up by EPMC/OIL. EPC Contractor is required to adhere to the specified scheme strictly. Any Deviation in the specified parameters suggested by contractor shall be substantiated with documentary evidence / calculations for review by EPMC.
EPMC has already made presentation of computer animated
3D Walkthrough model to OIL based on process flow concept as per Basic Engineering & FEED, for design visualization of entire plant layout which they conceive, their milestones and operations of the units with focus on critical processes.
The facilities provided in the OCS are latest, suitable,
appropriate & proven technology. The proposed installation is designed to meet all the latest and relevant standards for QHSE-ISO and ISRS (International Safety Rating System) etc. The facilities proposed to be set up, would be based on latest process control system available including online monitoring and control facility for the entire plant and measurement for fluid at inlet and outlet.
Approved Basic Engineering & Front End Engineering Design
(FEED) documents are attached herewith for references.