Professional Documents
Culture Documents
TRANSFORMER
Transmission Line Lighting Application
Used to power aircraft clearance lighting on SOLUTIONS
T Y P E DSST-250
DSST-250
transmission towers crossing a river for security and FOR A
safety purposes. Our distribution station service Kuhlman’s DSST is a ruggedized design
transformer may be mounted on towers and used to incorporating high creepage insulators, high
CHANGING
provide lighting power up on the tower. over voltage capability with impedence WORLD
•Reduced total installed cost for application. protection to limit fault currents.
•Limited installation in a compact space up near
transmission line. Kuhlman Electric Corporation
Distribution Transformers Division
101 Kuhlman Blvd. , Versailles, Kentucky 40383
Phone: 1-800-388-6962 FAX: 1-859-873-2236
E-mail: distmkt@kuhlman.com
www.kuhlman.com
No. BRDSST0604
Product Information Custom designs / Options Typical Schematics
of Distribution Station Service •250/150 BIL rating for Wye/Delta installation of Distribution Station Service
Transformers •Reduced or uprated BIL options Transformer
•Customer-specified impedances
A station service transformer (DSST) combines
•Customer-specified ratios
the characteristics of a voltage transformer with b b b
•Higher over-voltage ratings a a a
power capability. This provides a fully insulated j j j
•Special tank configurations(409 or 304L SST) f f
e f e
product up to 48 kV with power performance up e
•Mounting rails, platform, or support lugs for direct d d
to 167 kVA. The design can withstand 115% over- c c c
pole mounting d
voltage continiously and 130% over-voltage for one h h
•Oil level gauge (magnetic), temperature gauge k k i k
minute. h
•Arrester pads-std
•Taps 2-2.5% above and below, 4-2.5% below the nominal
This combination allows direct connection to
primary voltage or special taps per customer request.
the transmission line in an economical, g g g
conveniently installed, pedestal or pole mounted
transformer. The transformation is directly from Features
the high voltage primary down to the low voltage b b b b b b
•Internal ground shield prevents capacitive voltage rise a a a
output to drive lighting loads, motor loads, and on secondary. j j
e
j
e
f f f
controls. •Winding line shields to prevent damage due to light- e
c c d c d
ning. d
Typical secondary ratings available: •Primary connectors for most typical substation cable h h
k k i k
120/240 VAC, 277 VAC, 240/480 VAC, 600 VAC. sizes. h
Contact us for other configurations. •Primary conductor is copper for efficiency.
•Aluminum strip secondary conductor for short circuit j j j
strength. g g g
•Windings are balanced and symmetrical for short
circuit strength.
Design features
O ptions: A B (std) C D Proven Kuhlman quality.
V oltage c las s, kV 46 46 35 25 Conformance to C57.12.00, 12.90
B IL rating, kV 250 250 200 150
S trike distance 21” 18” 14” 10”
CONTACT US
Leakage d istance 50” 37” 32” 23”
FOR PRICE AND AVAILABILITY
O v erall H eight 24.5” 19.8” 15.8” 9.8”
4/0 A W G - 4/0 A W G - Phone: 1-800-388-6962 FAX: 1-859-873-2236
C able range 6 A W G -2/0
500 M C M 350 M C M
M aterial E poxy P orc elain W et process E-mail: distmkt@kuhlman.com
Tap changer and PRV side view. F eatures
C apacitance
O il filled
G raded