Professional Documents
Culture Documents
ORDER INFORMATION
Material Item No.
with
Door overlay View Cranking Click-on
Cup Arm spring
Screw fixing
Zamak, Steel,
Full overlay 0 ■ F015072792
nickel-plated nickel-plated
Zamak, Zamak,
Half overlay 8 ■ F015072793
nickel-plated nickel-plated
COVER CAPS
Designation Cranking Imprinted/Embossed Item No.
Hinge arm cover cap, steel, short, nickel-plated, not imprinted,
0 On request F069073570
Soft-close compatible
ACCESSORIES
Designation Item No. Designation Item No.
Nexis Click-on mounting plates 216 Soft-close Pin 290 Assembly aids 358
Accessories 224 Technical information 226
180 Packaging units are not covered in this brochure; please enquire with your supplier
Hinge systems
Nexis Click-on 10
64
64
3-10 3-10
Tiomos
F 2xF F
8 11 16 3
Nexis
3 4 5 6 7 8 9 10 3 4 5 6 7 8 9 10
23 0 15 0
22 0 14 0
21 0 2 13 0 2
20 0 2 3 12 0 2 3
19 0 2 3 4 11 0 2 3 4
18 0 2 3 4 10 0 2 3 4
Special
hinges
17 0 2 3 4 9 0 2 3 4
16 0 2 3 4 8 0 2 3 4
Door overlay
Door overlay
15 2 3 4 7 2 3 4
14 2 3 4 6 2 3 4
Single-joint
MINIMUM GAP MINIMUM REVEAL NOTES
hinges
Cup distance Cup distance The minimum gap is the clearance
3 4 5 6 7 8 10 3 4 5 6 8 10 required between the front edge of the
14 0.0 0.0 0.0 0.0 0.0 0.0 1.0 14 0.5 0.5 0.5 0.5 0.5 0.5 cabinet and the closed door so that the
16 0.0 0.0 0.0 0.0 0.0 0.0 1.2 16 0.9 0.9 0.9 0.9 0.9 0.9 door can open without hindrance.
18 0.0 0.0 0.0 0.0 0.0 0.0 1.3 18 1.4 1.4 1.4 1.4 1.4 1.4
Cabinet making
Important: Reveals were calculated
accessories
19 0.0 0.0 0.0 0.0 0.0 0.0 1.4 19 1.7 1.7 1.7 1.7 1.7 1.7
for doors with a radius of 1 mm!
20 0.0 0.0 0.0 0.0 0.0 0.0 1.5 20 2.2 2.2 2.2 2.2 2.0 2.0
Door thickness
Door thickness
22 0.0 0.0 0.0 0.0 0.0 0.0 1.7 22 3.5 3.3 3.2 3.1 2.8 2.6 Hinge dimensions and reveal calculation
24 0.0 0.0 0.0 0.0 0.0 0.0 1.9 24 5.0 4.6 4.3 4.1 3.8 3.5 with factory setting.
We recommend a trial fitting.