Professional Documents
Culture Documents
Forest Machine
FOREST MACHINE
138MF Southeast Asia
A P P L I C A T I O N & A T T A C H M E N T
Performance
Emissions Control Engine
Long Reach Front Robust Undercarriage
(Non-Common Rail Type)
Max. working Reach (with fix grapple) 8 780 mm The engine complies with the US
EPA Tier 2 and EU Stage II Emission
The undercarriage is rugged enough to move about in
595
Regulations.
woods and deliver plenty of traction force. A low ground mm
pressure also helps increase high mobility. The undercarriage
is high and wide: Ample ground clearance and wide track
2 3
Maintenance Exclusive Guards for Cab and Body
Cab Guard
The cab is protected with a cab guard at front, top and rear
for surrounding obstacles. The guard at the top can be
Keeping Cool opened for emergency evacuation.
Body Guards
The body is protected with body guards on the top and both
The radiator is well encapsulated to prevent its heated air sides. The top guard serves to protect the engine; and side
discharge, keeping the engine and hydraulic oil cool even in body guards to protect the radiator and hydraulic pumps.
high-temperature environments. Dust Prevention Nets
The engine and radiator compartments are provided with
dust-prevention nets to keep clean inside, reducing the
entry of airborne debris and dust.
Cab Guards
Body Guards
Durability
Door,Engine cover with net
19 mm
4 5
SPECIFICATIONS
ENGINE SERVICE REFILL CAPACITIES DIMENSIONS
Model ......................... Isuzu CC-4BG1T Fuel tank .................................................................................... 250.0 L Unit: mm
Type ........................... 4-cycle water-cooled, direct injection Engine coolant .............................................................................. 19.0 L ZX138MF
Aspiration ................... Turbocharged Engine oil ...................................................................................... 15.8 L
A Distance between tumblers 2 990
No. of cylinders .......... 4 Swing device .................................................................................. 3.2 L
B Undercarriage length 3 790
Rated power Travel device (each side).................................................................. 4.0 L
Hydraulic system ........................................................................ 130.0 L *C Couterweight clearance 1 100
ISO 9249, net ......... 65 kW (87 HP) at 2 150 min-1 (rpm)
Hydraulic oil tank .......................................................................... 69.0 L D Rear-end swing radius 2 130
SAE J1349, net ...... 65 kW (87 HP) at 2 150 min-1 (rpm) M
D' Rear-end length 2 130
Maximum torque ........ 340 N·m (35 kgf·m) at 1 600 min-1 (rpm) D,D’
WEIGHTS AND GROUND PRESSURE E E Overall width of upperstructure 2 600
Piston displacement ... 4.329 L
Equiped with 4.60 m boom, 3.01 m arm and 0.45 m3 bucket F Overall height of cab 2 950
Bore and stroke ......... 105 mm X 125 mm
(ISO heaped), 2 450 kg counterweight. *G Min. ground clearance 595
Batteries ..................... 2 x 12 V / 55 Ah
Shoe type Shoe width kg kPa(kgf/cm2) H Track gauge 2 040
Governor .................... Mechanical speed control with stepping motor
700 mm 14 200 31 (0.32) F N I Track shoe width G 700 G 800 SHG 960
Triple grouser
800 mm 15 000 29 (0.30) J Undercarriage width 2 740 2 840 3 000
HYDRAULIC SYSTEM L C K Overall width 2 740 2 840 3 000
Single high grouser 960 mm 15 500 25 (0.26) G
Hydraulic Pumps *L Track height with triple grouser shoes 940
I A
Main pumps ............... 2 variable displacement axial piston pumps Equiped with 4.60 m boom, 3.01 m arm and 0.50 m3 bucket M Overall length
H B
Maximum oil flow ... 2 x 105 L/min (ISO heaped), 2 450 kg counterweight. With 3.01 m arm (with Fix grapple) 7 620
J,K
Pilot pump .................. 1 gear pump Shoe type Shoe width kg kPa(kgf/cm2) With 3.01 m arm (with 0.45 m3 bucket) 7 600
Maximum oil flow ... 33 L/min 700 mm 14 200 31 (0.32) N Overall height of boom
Triple grouser
Hydraulic Motors 800 mm 15 000 29 (0.30) With 3.01 m arm (with Fix grapple) 2 800
Travel ......................... 2 variable displacement axial piston motors Single high grouser 960 mm 15 500 25 (0.26) With 3.01 m arm (with 0.45 m3 bucket) 2 620
Swing ......................... 1 axial piston motor * Excluding track shoe lug G: Triple grouser shoe
SHG : Single high grouser shoe
Relief Valve Settings WEIGHT: BASIC MACHINE and COMPONENTS
Implement circuit ........ 34.3 MPa (350 kgf/cm2) Basic Machine Weight
Swing circuit ............... 32.3 MPa (330 kgf/cm2) Weights of the basic machines [including 2 450 kg counterweight and WORKING RANGES
Travel circuit ............... 34.3 MPa (350 kgf/cm2) triple grouser shoes, excluding front-end attachment, fuel, hydraulic oil,
meter 10 meter 10
Pilot circuit ................. 3.9 MPa (40 kgf/cm2) engine oil and coolant etc.] are:
9 E 9
Hydraulic Cylinders Shoe width Shoe width Weight
700 mm 11 800 kg 8 8
Quantity Bore Rod diameter
Triple grouser
Boom 2 105 mm 70 mm 800 mm 12 600 kg 7 7
Arm 1 115 mm 80 mm Single high grouser 960 mm 13 100 kg 6 6
Bucket 1 100 mm 70 mm 5 5
Component weights C
4 4 C
UPPERSTRUCTURE Weight 3 3
D
Revolving Frame Counterweight 2 450 kg
2 2
D-section skilt for resistance to deformation. 4.60 m boom(with arm cylinder) 1 030 kg
1 1
Swing Mechanism 3.01 m arm(with bucket cylinder) 710 kg
Axial piston motor with planetary reduction gear is bathed in oil. 0 0
0.45 m3 bucket 400 kg Ground Line Ground Line
Swing circle is single-row. Swing parking brake is spring-set/hydraulic- 0.50 m3 bucket 410 kg 1 1
released disc type. 2 2
Swing speed .............. 13.7 min-1 (rpm) B
3 B 3
Swing torque .............. 34.0 kNm (3 470 kgfm) BUCKET AND ARM DIGGING FORCES
4 4
Operator's Cab Arm length 3.01 m
5 5
Independent roomy cab, 1 005 mm wide by 1 675 mm high, conforming Bucket digging force ISO 99 kN (10 100 kgf)
to ISO* Standards. 6 6
Bucket digging force SAE : PCSA 86 kN (8 780 kgf) A’ A
* International Standardization Organization Arm crowd force ISO 58 kN (5 920 kgf) 7 A 7
12 11 10 9 8 7 6 5 4 3 2 1 0 meter
Arm crowd force SAE : PCSA 57 kN (5 820 kgf) 8
UNDERCARRIAGE 12 11 10 9 8 7 6 5 4 3 2 1 0 meter
Tracks Illustration show 2.26 m Arm length
Heat-treated connecting pins with dirt seals. Hydraulic (grease) track BACKHOE ATTACHMENTS
adjusters with shock-absorbing recoil springs. Boom and arms are of welded, box-section design. Bucket is of welded
Numbers of Rollers and Shoes on Each Side steel structure. Side clearance adjust mechanism provided on the bucket BACKHOE BUCKETUnit:mm FIX GRAPPLEUnit:mm
Upper rollers ............... 2 joint bracket. 3.01 m arm (with 0.45 m3 bucket)
3.01 m arm (with Fix grapple)
Lower rollers .............. 6 Buckets A Max. working reach 8 780
A Max. digging reach 8 740 B Max. working depth 5 890
Track shoes ................ 42 Capacity Width
No. Of
Recommendation
Without side With side Weight A' Max. digging reach (on ground) 8 580 C Max. working height 9 200
Track guards .............. 4 ISO heaped teeth 3.01 m arm
cutters cutters B Max. digging depth 5 860 Excluding track shoe lug
Traction Device 0.45 m3 890 mm 1 010 mm 5 400 kg
C Max. cutting height 9 100
Each track driven by 2-speed axial piston motor. Parking brake is spring- * 0.45 m3 890 mm 1 010 mm 5 410 kg
set/hydraulic-released disc type. Automatic transmission system: High-Low. D Max. dumping height 6 690
0.50 m3 950 mm 1 070 mm 5 410 kg
E Min. swing radius 2 590
Travel speeds .............. High : 0 to 4.4 km/h * 0.50 m3 950 mm 1 070 mm 5 420 kg Excluding track shoe lug
Low : 0 to 2.5 km/h
* Side-pin-type bucket
Maximum traction force ... 130 kN (13 300 kgf) Suitable for materials with density of 1 800 kg/m3 or less
Gradeability ................. 70% (35 degree) continuous Suitable for materials with density of 1 600 kg/m3 or less
6 7
LIFTING CAPACITIES (Without Bucket)
Notes: 1. Ratings are based on ISO 10567. A
2. Lifting capacity does not exceed 75% of tipping load with the machine on firm, level ground or A: Load radius
87% full hydraulic capacity.
3. The load point is the center-line of the bucket pivot mounting pin on the arm. B: Load point height
B
4. *Indicates load limited by hydraulic capacity. C: Lifting capacity
5. 0 m = Ground. C
For lifting capacities, subtract bucket and quick hitch weight from lifting capacities without bucket.
ZX138MF Rating over-front Rating over-side or 360 degrees Unit : kg
Load Load radius
At max. reach
point 1.5 m 3.0 m 4.5 m 6.0 m 7.5 m
Conditions
height
meter
m
Boom 4.60 m *2 280 *2 280 *2 100 *2 100
6.0 6.07
(*2 280) (*2 280) (*2 100) (*2 100)
Arm 3.01 m
*3 160 *3 160 *3 160 2 690 *1 980 *1 980
Without Bucket 4.5 6.92
(*3 160) (*3 160) (*3 160) ( 2 650) (*1 980) (*1 980)
Shoe 800 (700) mm *5 170 *5 170 *4 000 *4 000 *3 490 2 610 *1 980 1 870
3.0 7.38
(*5 170) (*5 170) (*4 000) ( 3 990) (*3 490) ( 2 560) (*1 980) ( 1 830)
*7 840 6 950 *5 030 3 780 3 650 2 490 *2 100 1 780 *2 090 1 780
1.5 7.50
(*7 840) ( 6 840) (*5 030) ( 3 720) ( 3 590) ( 2 450) (*2 100) ( 1 750) (*2 090) ( 1 750)
*7 410 6 530 5 460 3 580 3 550 2 400 *2 320 1 810
0 (Ground) 7.32
(*7 410) ( 6 420) ( 5 360) ( 3 520) ( 3 480) ( 2 350) (*2 320) ( 1 780)
*4 460 *4 460 *9 140 6 440 5 350 3 490 3 500 2 350 *2 780 1 990
-1.5 6.81
(*4 460) (*4 460) (*9 140) ( 6 320) ( 5 260) ( 3 430) ( 3 430) ( 2 310) (*2 780) ( 1 950)
*7 670 *7 670 *8 100 6 510 5 370 3 510 3 660 2 460
-3.0 5.87
(*7 670) (*7 670) (*8 100) ( 6 390) ( 5 280) ( 3 450) ( 3 590) ( 2 420)
*5 570 *5 570 *3 670 *3 670
-4.5 4.22
(*5 570) (*5 570) (*3 670) (*3 670)
EQUIPMENT Standard and optional equipment may vary by country, so please consult your Hitachi dealer for details.