Professional Documents
Culture Documents
Uconnect 8.4 & 8.4N Software Update Instructions: English Page 2
Uconnect 8.4 & 8.4N Software Update Instructions: English Page 2
4N
Software Update Instructions
English Page 2
Français Page 6
Download the Software Update to a USB
Plug the USB Flash Drive into the computer and make sure it is active and ready
2 to use. Take note of the name of the USB flash drive and the drive location.
Confirm that there are no files or folders on the USB Flash Drive. This is done to ensure that
3 there are no conflicting files that may interrupt the software update process.
A B
C
Download the Software Update to a USB
5 Leave the USB Flash Drive in the computer and proceed to next step.
Follow the website download instructions to acquire the system update files for
7 performing your Uconnect System update described in next section.
Unzip all the files to the root folder of USB Flash Drive. (Files should not be within
a zip folder) Your USB files should look like the screen below when you open it,
displaying multiple files / folders.
Once the Web download process is complete continue to the instructions on the
8 next page.
Install the Uconnect Software Update
Complete The Following Steps From INSIDE your vehicle:
Software should check the information and then start updating, it will state “Reflashing
3 device”. This will take 10-15min
Do not turn off ignition/engine or remove USB, radio will become corrupted and unusable.
Install the Uconnect Software Update Cont.
Complete The Following Steps From INSIDE your vehicle:
OLD: 15/42/D1
NEW: 16/21/D7
Vérifiez que la clé USB ne contient pas de fichiers ou de documents. Cette étape garantit qu'il
3 n'y a pas de fichiers contradictoires pouvant interrompre la procédure de mise à jour du
logiciel.
A B
C
Téléchargement de la mise à jour du logiciel vers une clé USB
Cette étape de la procédure est réalisée sur un ordinateur doté d'une connexion Internet. Les renseignements qui
s'affichent à l'écran peuvent varier d'un ordinateur à l'autre selon le système d'exploitation installé. Cependant, la
procédure globale est très similaire.
Suivez les instructions de téléchargement du site Web pour acquérir les fichiers de
7 mise à jour du système afin d'effectuer la mise à jour du système Uconnect décrite
dans la section suivante.
Décompressez tous les fichiers dans le dossier racine de clé USB. (Fichiers ne
doivent pas être dans un dossier zip) Vos fichiers USB ressemblera à l'écran ci-
dessous Lorsque vous l'ouvrez, l'affichage de plusieurs fichiers / dossiers.
OLD: 15/42/D1
NEW: 16/21/D7