Professional Documents
Culture Documents
Online Class 2 PPT-Part 1-1
Online Class 2 PPT-Part 1-1
TEL: 132
Dr. Mohamed Abdelhamid
Universidad Técnica Federico Santa María (UTFSM), Chile
Outline
Lab Safety and Tools
A typical breadboard
Engineering Notation
DC Power Supplies
Digital Multimeter
Resistor Color Code
Ohm’s law
Kirchhoff's Laws
Current and Voltage Divider Rules
Lab Safety and Tools
No food or drink is allowed in lab at any time.
Spilling a bottle of water or soda onto such equipment could leave the
experimenter in the receiving end of a severe shock.
Similarly, items such as books and jackets should not be left on top of
the test equipment as it could cause overheating.
A typical breadboard
A typical breadboard
Engineering Notation
Measuring Devices
DC Power Supplies
Task 1
model:________________ model:________________
srn:__________________ srn:__________________
model:________________
model:________________
srn:__________________
srn:__________________
Digital Multimeter
Task 2
model:________________ model:________________
srn:__________________ srn:__________________
Digital Multimeter
Digital Multimeter
model:________________
model:________________
srn:__________________
srn:__________________
Resistor Color Code
Resistor Color Code
Resistor Color Code
Resistor Color Code
Task 3
Resistor Color Code
Task 4
Resistor Color Code
Example:
This means that the actual value of any particular resistor with this
code could be anywhere between
12,000-1200=10,800, to 12,000+1200=13,200.
Theory Overview
• A series circuit is defined by a single loop in which all components are
arranged in daisy-chain fashion.
• The current is the same at all points in the loop and may be found by
dividing the total voltage source by the total resistance.
• The voltage drops across any resistor may then be found by multiplying
that current by the resistor value.
Series DC Circuits
Series DC Circuits
Series DC Circuits
Series DC Circuits - Task 9
Series DC Circuits -Task 10
Series DC Circuits -Task 10