Professional Documents
Culture Documents
SAGAR SHARMA
4+ years’ Experience in field of QA/QC in Oil & Gas, Power Plant,
and Hydrocarbon sector.
Contact No:-91-9412529500
Email:-sagarsharma311211993@gmail.com
CAREER OBJECTIVE
PROFESSIONAL QUALIFICATION
SUMMER INTERNSHIP
COMPANY NAME :- Hindustan Machine & Tools Ltd (Ajmer)
TOPIC :- Manufacturing. Assembling.
DETAILS :- Study about their differences, Working,
Report preparation & Submission.
DURATION :- 45 days.
CERTIFICATE
Employment Record
Work Experience:
Area of work:-
Heavy Steel Structures & piping’s (Job no. JI-2021) As Client Indian Oil Corporation
Limited (JAIPUR). PROJECT-100 MTPD BIO- METHANATION PLANT..
Familiar with codes & Standard like API 5L, API 1104, (ASME Sec V, VIII, IX) B31.3,
IBR, NACE requirements.
Witnessing of WPS, PQR & WPQ as per related international specification and reference
standards. like ASME,DIN,ISO,IS,ASNT, AWS. etc.
Inspection of raw materials such as CS/SS Plates, CS/SS Tanks, CS/SS Seamless /
Welded Pipes, Structural items like Channels, Beams, Angles, Bars etc.
Interpreting results of MPI, DP, UT, RT, PMI and Hardness for acceptance or recommended
actions if rejected.
Witness of Hydro test, NDT test & Pneumatic test.
Inspection of pressure vessel, Heat Exchange, fabricated items, Dish ends during
fabrication stage, and final stage.
Perform inspection and monitoring activities as per approved QAP, ITP,Drawings, Standards
& Codes.
Review of Inspection report, Material test certificates (MTC) and verifying chemical and mechanical
requirements with required ASME standards and specification & Electrode Batch certificate.
Conversant with the National and International codes like ASME Sec-V,ASME Sec-IX, ASME Sec-
II, Part-C (Electrode & Filler wire),Part-A(Ferrous Material),ANSI B-16.5 & 16.47, ANSI B-31.3
(Process piping) & ANSI 31.1(Power piping), ASME B16.34, API 526 & API 527 etc.
Interface with clients & consultants and Technical discussion.
Conversant with MMA, SMAW, GTAW, SAW & GMAW welding process etc.
Interpretation of Radiography films, verification of Heat treatment cycles and charts etc.
Inspection of surface preparation / painting at 1st coat, intermediate & final stage.
Inspection of pressure vessel, Heat Exchange, fabricated items, Dish ends during
fabrication stage, and final stage.
JOB RESPONSIBILITY:-
• Heavy Steel Structures & piping’s of LUBE OIL SYSTEMS As Client GAIL, BHEL, NTPC,
IGL,SIEMENS, SKODA, IOCL, IIFCO.
• Preparing Inspection and Test Plan (ITP), Job Procedure and Formats for Project requirement as per
technical specification & contractual document.
• Review of welding procedure specification WPS, PQR & WPQ as per the code requirement.
• Conversant with MMA, SMAW, GTAW, SAW & GMAW welding process etc.
• Final weld inspection and witnessing of hydro testing for pressure piping, Valves, Pumps and vessels.
• Review of Inspection report, Material test certificates (MTC) and verifying chemical and mechanical
requirements with required ASME standards and specification & Electrode Batch certificate.
• Performing Inspection of all incoming Materials, Verification and Inspection of Materials And
Inspecting the pipe weld while welding and final inspecting the same.
• Conversant with the National and International codes like ASME Sec-V,ASME Sec-IX, ASME Sec- II,
Part-C (Electrode & Filler wire),Part-A(Material),ANSI B-16.5 & 16.47, ANSI B-31.3 (Process piping)
& ANSI 31.1(Power piping) & API 650, API 510 etc.
• Day to day Co-ordination and regular inspection activities with consultant and client.
Control of periodically calibration of all measuring & testing instrument from our source and in house.
• Responsible for preparing final documentation as per client requirement.
• Interface with clients & consultants and Technical discussion.
INSPECTIONS RESPONSIBILITY:-
INTERPERSONAL SKILL
PERSONAL DETAILS
DECLARATION
I do hereby declare that the above information is true to the best of my knowledge.