Professional Documents
Culture Documents
Proforma Invoice
1
FLOOD LIGHT 100W 250*250*40 1 17 250.00 17 250.00
Led flood light 200W 27.5*28.5*5.5/1285g 1 10 970.00 10 970.00
Led flood light 300W/400W 33.5*34.5*5.5 1 11 530.00 11 530.00
3)After Die CASTING
Burring -vertical type 3pcs 315.00 945.00
Burring - horizontal type 2pcs 558.00 1 116.00
Sand belt (1m * 51mm / pc) 50 pcs 3.42 171.00
Sand belt(2100*180*80 mm / pc) 50pcs 3.80 190.00
Bench drill machine ZL4116B 3pcs 225.00 675.00
Drill for 3.4mm 50pcs 0.7 35.00
Drill for 5.2mm 50pcs 1.44 72.00
Drill for 6.8mm 50pcs 1.88 94.00
Drill for 8.5mm 50pcs 3.20 160.00
Tapping machine ZL-4012S 3pcs 240.00 720.00
Tap for M4 50pcs 3.20 160.00
Tap for M6 50pcs 3.50 175.00
Tap for M8 50pcs 5.50 275.00
Tap for M10 50pcs 6.50 325.00
4)Consumables Parts of 900T Machine for one year use
INJECTION SLEEVE DIA 110 /120 MM 3 1 200.00 3 600.00
INJECTION PLUNGER DIA 80 /90/100/110/120 MM 300 36.00 10 800.00
Sic MELTING POT (800 kgs CAPACITY) 3 1 200.00 3 600.00
Heat Sensor for Furnace 10 45.00 450.00
SIC Protective bush 5 45.00 225.00
Spraying gun 3 31.50 94.50
Casting Iron Ladle 10 36.00 360.00
Injection connector 1 157.50 157.50
Plunger connector 1 139.5 139.50
Trough 10 31.50 315.00
Soup ladle 5 2.70 13.50
Colander 5 3.60 18.00
Releasing agent 5barrel 117.90 589.50
Plunger Lubricate oil 5barrel 128.25 641.25
Coating agent 2 barrel 200.00 400.00
2
5)other accessories for die-casting
Air Compressor Unit:
1- compressor (37KW/50HP /6.5m3/min)
2-dryer( 10 KG/cm2 ) 1 5 100.00 5 100.00
3- gas tank.( 1M3 / 8 KGS )
4- gas tank:(0.6M3 )
NOTE : The Seller should send 3D drawing of mould to the buyer for
conformation , only after the buyer’s confirmation on design and sizes of drawing,
the seller can start to manufacture the molds .
The seller should test the mould on machine and produce casting
samples , then send samples to the buyer by DHL for approval.