Professional Documents
Culture Documents
LOL - WP
40
SENSOR
REMOVE 30
TEMPORARILY
45
IN CASE OF LOW OIL LEVEL SWITCH
INITIAL AIR LOCK
OK
C.T.C. 95
MINIMUM
85
O 38 SUPPLY N/C
_ N/O
_ + - 0 I/P O/P CV O/P
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
PIPE L ENGTH
O 50
35
ADAPTOR
TO SUIT YOUR PIPE
SPECIFICATION
SUPPLY : 110V OR 220V AC +/-10%; 50Hz +/-2% OR 24 V DC
ACCURACY : +-2mm
RESET : MANUAL
OPERATING TEMP. : 10 C TO 55 C
Old float type switches rely on buoyancy of the oil which changes with the impurities in the oil, and variation in
viscosity.
Trip level also depends on the strength of the magnet used and needs adjustment for the individual piece.
In ACD switch the sensing element is Capacitance Sensor whose performance is highly consistent such that
all the parameters can be precisely factory set and no in-situ adjustments are necessary.
The Switch module is designed in a weatherproof enclosure confirming to IP 66. (can be supplied in enclosure
suitable for hazardous area).
In view of continuous development, we reserve the right to modify the specifications.