Professional Documents
Culture Documents
Contact
E-mail
Phone
Fax
Customer Project name Untitled project 2021-08-10 09:15:56.228
Project ID
Contact
E-mail
Phone
Date 2021-08-10
Scope of delivery
- Wilo-Helix V high-pressure multistage centrifugal pump
- Installation and operating instructions
- Counter flanges of cast iron with the corresponding screws, nuts
and gaskets for PN16 pump version with oval flanges
Design notes
- Motor protection for 3-phase motor is to be provided on request
or onsite
- Single-phase AC motor equipped with built-in thermal motor
protection and capacitor
- In its standard position, the terminal box is aligned with the
suction flange, but this can be changed if necessary
- The Wilo-Helix V is equipped with a standard mechanical seal
- Oval and round counter flanges are available as accessories in
stainless steel or cast iron
- Bypass sets are available as accessories
Operating data
Fluid media: Water 100 %
Fluid temperature: 40,00 °C
Fluid concentration: 100,00 %
Requested flow: 17,00 m³/h
Requested head: 60,00 m
Product data
Min. fluid temperature: -30 °C
Max. fluid temperature: 120 °C
Project ID
Contact
E-mail
Phone
Date 2021-08-10
Motor data
Mains connection: 3~460V/60 Hz
Voltage tolerance: +-6 %
Rated power: 5,5 kW
Motor efficiency class: IE3
Rated current: 9 A
Rated speed: 3535 1/min
Power factor: 0,84
Motor efficiency:
Motor efficiency:
Motor efficiency:
Insulation class: F
Protection class: IP55
Materials
Pump housing: 1.4301
Impeller: 1.4307
Shaft: 1.4301
Shaft seal: Q1BE3GG
Gasket material: EPDM
Installation dimensions
Pipe connection on the suction side: G 2, PN 16
Pipe connection on the pressure side: G 2, PN 16
Project ID
Contact Installation location
E-mail Customer pos.no
Phone
Date 2021-08-10
Impeller 1.4307
Shaft 1.4301
Shaft seal Q1BE3GG
Gasket material EPDM
Information for order placements
Weight approx. 53 kg
Item number 4201323