Professional Documents
Culture Documents
Troubleshooting Exam
Teacher: Mr Scott
Question 1
The five major DISTINCT major internal computer component that would be in the report
are
1. The first major component is Motherboard
2. The second major distinct is Central Processing unit (CPU)
3. The Graphics Processing Unit (GPU), commonly known as a video card, is the third
main distinguishing feature.
4. The fourth distinct major internal computer component is the Power Supply unit
5. The fifth major Distinct component would have to be Hard Disk Drive (HDD)
The first motherboard characteristic is that this is rectangular in shape and with
a desktop computer a motherboard is mounted up inside the case and is often seen
inside the casing, on the outer edge from the most easily accessible side. It's held in
place with tiny bolts who go through post slots or also seen with physical eye sight
that when you look at the motherboard all of the internal components connect to the
motherboard's ports on its front. The CPU is housed in a single socket/slot. Numerous
ports allow for both the attachment of one or more memory modules. Additional
connections upon on motherboard let the hard drive and optical drive and, if present,
The third characteristics of the motherboard is that there are several ports that you
can see clearly on the front of the motherboard which are a variety of peripherals card
ports are also located the front of the motherboard. Several video cards, sound cards,
and other expansion cards are attached to the system via these slots.
Kamish Tulloch Troubleshooting Section B Exam
computer chip. This is due to the fact that it is made up of a square piece of crystalline
silicon that is extremely thin. It also has a series of tiny pins sticking out around it in a
square format.
The second characteristic of a Central Processing unit is that the CPU also
has a very detailed design on top that is made up of the transistors and wiring that
were processed into the silicon, a silicon chip comprises millions of tiny but it by
extremely small wires. The chip is often linked to the remainder of the system by very
The third characteristic of a Central Processing unit is that the CPU also have a little
triangle at the top left this way you will know how to correctly place it so that the pins
cannot be damaged if place incorrectly. The CPUs are typically compact and square
in shape, with a slew of short, rounder metal connectors on the underside. Some
vintage CPUs use pins rather than metallic connectors. The CPU is intrinsically linked
The first characteristic of a Hard Disk Drive is that every disk platter is flat
and round in shape. Its two materials are coated with a magnetic substance, and data
is stored on them. Hard disk platters are composed of stiff metal or glass.
A second feature of a hard disk drive is that it is made up of numerous round disks ter
med platter which are enclosed on the inside of a container.
The hard disk drive is also rectangular in shape, with a circle-shaped container to
house the disk. The data-storage component of the drive is composed of a number of
The spindle is linked to a motor that spins the platters. Platters are typically composed
Three Graphics Processing Unit (GPU) characteristics
The first characteristic of a GPU is that it is rectangular in shape also Graphics cards
are often large, bulky drop-in devices for desktop computers with one, 2, or triple
fans. Such cards have the GPU chips as well as RAM to support larger graphics
demands, such as video games. The components are kept cool by ventilation.
The second characteristic of GPU is that it has ports on the side which are use for
connection, and the third characteristic is that it has a fan at the top side of the GPU
The first characteristics of a Power supply unit is that it is cuboid in shape and have a
however this might vary between product to product. Many powers supply include
The second characteristics that the power supply has is that of its many cords the
power supply has cords such as the major function of the Power Supply Unit (PSU) is
to give power to your motherboard. This is accomplished by the use of a 20-pin or 24-
pin connector. A 24-pin cable is fully compatible with a 20-pin motherboard; this
The third characteristics of a power supply unit is that I have a fan at the side in order
to generate air so that the system can flow properly,[ CITATION Com20 \l 8201 ] a
fan housed within a power source The power supply fan exhausts warmer air from the
Question 2
Computer fan is important and a computer technician may suggest it to be use for
cooling a computer system because A computer fan's principal function is to keep a system
cooled. CPUs as well as other components within computers can become extremely hot, even
hot enough to fry an egg. Unless the device uses a fluid cooling, maintaining the called
leading is vital. [ CITATION Rya15 \l 1033 ]A computer technician may also suggest this cooling
system because ventilation is being used to bring cooler air externally into the case, remove
heat from within, and circulate air all over a heat sink to cool a component. [ CITATION
Ben20 \l 1033 ]. One modification that a video editor's PC may occur in order for the cooling
system to be efficient is to give it a good clean in order to make the computer fan more
effective reason being is that other pollutants enter your Desktop or mac chassis as your fans
pull in air. Just as a library will collect dust if it isn't cleaned and polished on a regular basis,
your computer fans will likely get faster and faster if you don't give them a thorough cleaning
occasionally. this is a major change that a video editor must undergo in order to have an
A computer technician may also suggest a heat sink for cooling for a computer
system mainly because A heatsink is a heating element that is passive and transfers’ heat. The
heatsink is often a metallic component that can be mounted to a device that emits energy in
the form of warmth in order to dissipate that warmth to a flowing liquid and avoid the device
from heating and burning up due to the overheating. This is similarly simple to set up and
will improve computer performance because it uses fresh air from outside. One modification
that a video editor's PC may undergo in order for the cooling system to be effective is that
[ CITATION And21 \l 1033 ],thermal performance of a heat sink can be improved by enhancing
The third cooling system that a computer technician may suggest for a computer
system is heat pipes the reason that they would suggest heat pipes is because a heat pipe is a
thermal device that effectively transfers heat between two solid contacts by combining the
principles of thermal conductivity and phase transition. one modification that a video editor's
PC may undergo in order for the cooling system to be effective is that Heat sink fins absorb
heat from an electrical gadget and distribute it into the cooling fluid surrounding it. The
amount of heat transferred by a fin to the cooling medium reduces as the distance from the
heat sink's addressing. Using a material with higher thermal conductivity and lower the
aspect ratio of the fins serves to increase the total effectiveness of the fins.
The fourth cooling system that a computer technician can suggest for a computer system is
Liquid cooling the reason a computer technician may suggest liquid cooling is because Fans
in most pcs do an excellent task of maintaining electrical parts cool. However, for those who
wish to use high end hardware or force their PCs to operate quicker, a fan may not be
powerful enough. This is why a computer technician may want to suggest this form of
cooling. [ CITATION Tra21 \l 1033 ]If a system produces excessive heat, liquid cooling,
commonly known as water cooling, may be a better alternative. Putting liquids near sensitive
electronic equipment may seem contradictory, yet cooling using liquid is vastly more
efficient than cooling using air. one modification that a video editor's PC may undergo in
order for the cooling system to be effective because it will need a tubing this will allow your
The fifth cooling system that a computer technician may suggest is thermally advantaged
chassis because the fan configuration depressurization of the chassis interior with respect to
the outside air, as a result, all other chassis opening become intake vents. The primary intake
vents define in the design guide is the side panel vent however other smaller vents location
such as the front bezel and add in card areas can be very beneficial as well. The other reason
why the computer technician may suggest the thermally advantaged chassis is that airflow
balancing is critical to ensure the adequate cooling of all system components. That will be
very beneficial to the computer system if it is implemented in the computer system. One
modification that a video editor's PC may undergo in order for the coolant system to function
properly is that The CPU duct is the most significant component of the thermally
advantageous chassis design, and its placement is vital to its effectiveness. Its duct will be
located above the processor heatsink and placed so that the end of the duct is 12mm20mm
from the heat sink's top. This guarantees that the CPU heatsink only consumes cool air from
outside the chassis while also allowing some air to flow over there to cool other sections of
the computer.
Kamish Tulloch Troubleshooting Section B Exam
Question 3
The first storage device a company may want to purchase is the hard disk drive mainly
because A hard drive is the piece of hardware that contains all of your digital stuff or content.
Digital content on a hard disk includes your papers, photographs, music, videos, applications,
application preferences, and system software. Internally and externally hard drives are both
possible. which would be great for your organization. Hard disk drives are often utilized as a
computer system storage device. The hard diskette is used in clients’ gadgets as well as
business storage systems in data centres workplace that these hard disk drives are
commonly used. The hard disk drive also posses some challenge, one of which is that it can
have file system corruption this simply means that not only are files vulnerable to destruction,
but the file system as well. In the worst-case scenario, if the file system becomes corrupted,
all data contained in the database will be irreparably harmed. In such circumstances, you will
The second storage device a company may want to purchase is magnetic tape the reason that
this storage device would be most likely to be purchase is because it is Safe from Flood, fire,
and theft protection. Secure, Humidity and temperature protection. Cost-effective no backup
man hours or pricey equipment to deploy. Versatile - no data limits, quick access, and
complete management by you, which would be very beneficial to want to purchase in any
workplace this storage device is also in comparison to hard disks, which record capacity has
nearly hit its limit, magnetic tape-recording capacity is still rising, and next-generation
methods have been shown. Furthermore, the recorded area may be enlarged by having the
tape thin and lengthier, therefore future capacity improvements are possible. A workplace
Kamish Tulloch Troubleshooting Section B Exam
that would be most likely to use a magnetic tape storage device in are The magnetic storage
tape rotating method can help hospitals, colleges, government officials, IT corporations, non-
profit organizations, and other organizations that must backup large amounts of data. These
are just a few examples of businesses that employ magnetic tape as a backup system.
[ CITATION Mic16 \l 8201 ]. The magnetic tape also has some short comings which means a
challenge or a known challenge is that the magnetic tape storage has is If the tape is put near
a magnetic field, such as a huge speaker or magnets, the data may be corrupted.
Kamish Tulloch Troubleshooting Section B Exam
Reference