Professional Documents
Culture Documents
Ex BOEING 737NG
M3.3 Illustrated Parts Catalog
1. General
M3.3 Illustrated Parts Catalog
Part Illustrations
M3.3 Illustrated Parts Catalog
General
1. The P/N (Part Number) is
known Daily check
Scheduled Maintenance
Planed(“Letter”) check
General
IPC consist of the graphic and the
sheets.
Sheets
ITEM NUMBER - The item number corresponds to the the part in the
illustrations.
A dash (-)show that the item is not illustrated.
M3.3 Illustrated Parts Catalog
Part numbers are developed by Boeing for the following part categories and
purposes:
1.proprietary parts
“BCREF “ is used to identify a Boeing reference number.
2.Specification numbers for non-proprietary parts
Boeing Specification part numbers developed for aircraft are identified with the
prefix "S" in front of the first position
3.Boeing standard parts
“BAC” is used to identify all Boeing Standard part numbers.
M3.3 Illustrated Parts Catalog
shows the
relationship of one
part to another SUPPLIER CODE - The (5) digit code
which identifies the manufacturer of the
part.
The specific digit - The quantity of the part which is used on the NHA
assembly
UNITS PER "RF" (Reference) - Indicates the item is listed at the NHA location
ASSEMBLY (UPA) which carries the UPA quantity.
CASE 1
AIRCRAFT SERIES: BOEING 737-800
Part Number: BACB28AW21B035A
FIND OUT
ATA Chapter , Section , Unit Number: .
ITEM : .
The parts nomenclature : .
Can this part be used for B737-800 aircraft with registration number B-
5022?
M3.3 Illustrated Parts Catalog
M3.3 Illustrated Parts Catalog