Professional Documents
Culture Documents
home?
Are you searching for Wi-Fi installation guidance? Then you are in the
right place.
In this article you will get complete information about the installation
process.
Start…
If your wireless router and other devices support Wi-Fi Protected Setup
(WPS), you can connect and configure them with a single button press.
1. Determine the most suitable location for the wireless router. The best
location is in the centre, away from any potential sources of wireless
interference.
Keep the router away from windows, walls, and microwaves.
This wiring is only temporary; once the network is set up, you will remove
the cable.
(WPA2 is much safer than WEP.) With older wireless adapters, use WPA
or WPA2/WPA2 mixed mode. For more current devices, WPA3 is another
choice, however its compatibility is limited.)
11. On the PC, set up the wireless adapter. Unplug the connection
connecting the PC to the router after saving the router's configuration
settings. Then, if the laptop doesn't have a wireless adapter installed or
built-in, plug in a USB or PC card wireless adapter.
Your computer may install the drivers for you automatically, or you may
need to utilise the setup CD that came with the adapter.
12. Connect the newly created wireless network. Locate and connect to
the new network you created on your computer and other
wireless-enabled devices.