Professional Documents
Culture Documents
1. Bench Grinder
TheEngineersPost.com Page 1
This types of grinding machines are fixed on a workbench or table. Gear or pulley is
fitted in it. For rotating the big-size gears or pulley a handle is also fixed. It contains one
or two grinding wheels. Edges of cutting tools can be made with this grinder. Provision
can be made to operate these with power also.
2. Hand Grinder
This grinder is also fixed on the workbench or table. There is a provision of moving the
grinding wheels with a level as shown in the figure.
3. Pedestal Grinder
This types of grinding machines are operated with electric power. This is fitted on a
pedestal frame separately on the ground. A grinder wheel is fitted each on both sides of
the shaft of the electric motor.
Tools rests are also provided with them. These are the most widely used in the
workshops. Edges of all types of cutting tools are made with these grinders. Apart from
this, molded articles can also be cleaned with it.
4. Portable Grinder
This is a small grinder operated with electric power. It can be easily carried anywhere.
Grinding can be done by holding it in hand. It is used for cleaning the heavy welding
jobs.
On one end of the motor shaft, a grinding wheel is fitted and on the other end, a handle
or switch for operating the machine is fixed according to our convenience. It should be
used carefully since there is a possibility of getting an electric shock.
5. Flexible Grinder
This types of grinding machines are shown in the figure. The electric motor in this
grinder is fitted on such a basis that it can be moved in any direction. A flexible shaft is
fitted on the motor shaft with the help of a coupling. On one end of the shaft, a grinding
wheel and handle are provided. Large jobs can be easily grinded with this grinder.
6. Precision Grinder
In this type of grinder, a movable spindle is fitted in the grinding wheel. This spindle is
fitted on a table along with its motor. With this spindle, the grinding wheel can be
turned in forward, backward, left, or right direction in running condition. Jobs of
excellent finish and accuracy are grinded with it. These grinders are of the following
types:
1. Cylindrical grinder
2. Plung cut grinder
3. Form grinder
4. Internal grinder
5. Centreless grinder
6. Surface grinder
7. Universal grinder
8. Tool and cutter grinder
1. Cylindrical Grinder
The surface which has been made plain by shaper or plainer are grinded with this
grinder. The cylindrical surface is grinded with a machine in which grinding wheel is
fitted on the shaft of a free electric motor.
In this type of grinders, the grinding wheel is fitted on the machine's work table, which
can be given crossfeed and the entire surface of the job can be grinded. These are of the
following three kinds:
In this type of grinders, the job is rotated in chuck or center and the entire cylindrical
surface of the job is grinded. With this grinder finishing of sleeves, pins, rods, taper
pins, etc.
b. Roll Grinder
This type of grinder is used in steel mills, printing presses, etc, for grinding heavy
rollers.
c. Piston Grinder
Pistons of I.C. engines are required to be grinded not in round shape but in oval and
taper shape so that when their size increases due to heat these may not get deposited in
the cylinder. This grinder is specifically made for grinding of these shapes.
These grinders are used to grind small shafts. The diameter of the grinder is much more
than that of the job. The crankshaft of motor vehicles is a grinder with this grinder.
These are also called crankshaft grinding machines. This type of grinder is also made in
a different form for camshaft grinding. In order to save the shaft from becoming
flexible, steady rests are used.
3. Form Grinder
Grinding wheels of different shapes are made under this type of grinders. These wheels
are given feed and accurate grinding is done as per the shape of the grinding wheel on
the moving cylindrical surface. Under this category, three types of grinders are
included. These are:
These grinders are used for grinding jobs of ordinary shape. The principle of an
ordinary form grinder is shown in the figure.
b. Thread Grinder
This type of grinder is used to cut accurate threads. Grinding wheels of the size and
shape of the thread are used. Its principle has been shown in the figure.
c. Gear Grinder
The principle of gear grinder is shown in the figure. Grinding wheels of different forms
are used in this grinder to cut dents of different sizes and shapes.
4. Internal Grinder
These grinders are used for grinding round and hollow jobs whether the internal
surface of these job is completely round, ditched round, or is in taper. Small grinding
wheels of 3 cm to 5 cm, are used in such grinders. Sometimes grinding wheels of special
shape 0.2 cm to 0.3 cm. These grinders can be divided into two parts.
a. Chucking Grinder
In this type of grinder, job is held in the chuck. The grinding wheel makes the job
accurate through grinding of its hollow part.
b. Planetary Grinder
In this type of grinder, while the job remains stationary, grind wheel moves like a
planet in eccentric motion in the inner part and grinds the inner surface. Special
arrangements are made to move the grinding up and down. its principle has been
illustrated in the figure.
5. Centreless Grinder
In this type of grinder, for holding the job on the chuck is used. The job is moved
through the medium of a grinding wheel and a regulating wheel. There are four main
parts of this grinder: (1) Grinding wheel (2) Work rest (3) Regulating wheel (4) Guide.
Their principle has been explained through the figure.
Jobs keeps on touching the work rest blade because of the pressure of the grinding
wheel. The regulating wheel forces the job to spin at an equal speed. In this way, the
regulating wheel and the grinding wheel start moving in one direction. The job gets an
automatic forward speed.
The rate of movement of the job depends upon the inclination and speed of the
regulating wheel. It can be adjusted according to the requirement. This type of grinder
is used in modern workshops for mass production. Jobs of glass, porcelain, wood,
rubber, plastic, iron and steel and alloy are polished and finished with this grinder. The
job can be placed in their position.
6. Surface Grinder
Flat surfaces are accurately grinded with, this type of grinders. For this grinder, the job
is held directly by a magnetic chuck or work table. The race-protecting table of plainting
or shaping machines is also used in form of a table. Their classification is done in two
ways:
This type of grinder has been shown in the figure. This work table reciprocates like a
planer or shaper machine.
In this type of grinder, grinding wheel is fixed vertical to the machine table or job.
A horizontal spindle surface grinder is shown in the figure. The spindle of the grinding
wheel is fitted in a horizontal direction. The wheel is moved ahead slowly. When one
stroke is complete, it is driven back and horizontal grinding is done.
7. Universal Grinder
This is a sort of plain cylindrical grinder. Its worktable, headstock, and grinding head
are of swivel type. That is why all types of grinding can be done easily with this type of
grinders.
This is a small grinding machine. Drill, reamer, tap, and the particularly milling cutter is
grinded with this grinding machine. The grinding wheels are of soft grade which is of
the shape of a straight, flaired cup or dish type.
Its wheel head can be turned at any angle. It can be set on the table for various jobs,
Tailstock is fitted in its "T" slot on its working table. This complete table can be adjusted
anywhere. Job is held in the centre between headstock and tailstock at both the ends.
That’s it, thanks for reading. If you have any questions about “types of grinding
machines” ask in the comments I’ll respond to you. If you like this article then please
share with your friends.
Read Next: