Professional Documents
Culture Documents
The BRAIN to equip the SIW 6AT-A22 for approved stud anchor
installations, bolting and documentation
The SI-AT-A22 is enhancing the application range of the SIW 6AT-A22 5 important benefits for customers.
SIW 6AT-A22 in Combination with SI
Application SIW 6AT-A22 Product benefits Customer benefits
AT- A22
1. Health and Safety SI-AT-A22 is able to set all In line with approvals
mentioned applications properly
• 6 - 8 mm HUS3 • 8 - 12 mm HST2 2. Handling & Selection of consumables is possible 2D-QR Code imager, 5 soft touch
(10 mm HUS 3 soft concrete only) Ergonomics via EAN and QR-Codes as well as a buttons
Anchors • 8 - 12 mm HST3 manual setting process
• Setting 8 – 12 mm HSA-f via S-TB
torque bar • 8 – 16 mm HSA
• Tightening M8- M16 bolts by a 30-ary 3. Reliability & User will get an acoustic and visual LED-Bars and Buzzer
• Tightening and loosening M6- M16
torque setting sequence (~20- Performance feedback after the setting is done
bolts
Bolts 140Nm) (positive or negative)
5. Handling & To proof that all fastening points are USB interface to transfer
• Tightening and loose MQN – Ergonomics set in the right way we will offer a installation data of the fastenings
MQ-System Pushbuttons documentation report done
1 What kind of application are you doing with your impact wrench. Situation Customer objections Argumentation
1. Every SIW 6AT-A22 needs its No, a SI-AT-A22 can be used with different SIW 6AT-A22. This
2 How often do you have to check your working results with an torque wrench? own module information will be also displayed in the documentation report.
2. An impact wrench can´t be Correct, there is no standard test procedure or standard to test impact
3 Are there applications you have to do with an torque wrench? checked wrenches. But HILTI has develop its own testing procedure to ensure
the consistent tightening quality of the adaptive torque system. This
Could you image that your live would become easier if you always have torque has been proven to the Technical Assessment body which released
4 Need
wrench with you? the ETA approval
Would you be satisfied if your impact wrench would be able to tighten stud Every SIW 6AT-A22 tool body which is used together with a SI-AT-
5
anchors in line with approvals? A22 module needs to get checked on our new torque tester before
Impact
leaving the RC. After ~25.000-40.000 settings (depending on the
What would happen if you could ensure that you don´t overtight your bolt
6 application) the module will remind its user to send the used SIW
connections?
6AT-A22 in for inspection. When the tool isn't send within a transition
How could you improve your daily work if an impact wrench would be able of period of ~5000 settings, the SIW 6AT-A22 can’t be used in
7 combination with the module until it is serviced, but it is possible to
approved stud anchor setting, bolting?
Benefit use the impact wrench independently.
How could you improve your daily work if you could prove/ document your work
8 3. Why can´t I put in the torque There are many factors impacting the tension force within a anchor/
results?
directly? bolt connection, like:
• Size
• Length
• Base material
• Quality
• Etc.
We know the factors impacting our stud anchor connections, but bolt
connections are very divers so that not all factors can be calculate in.
Bolting requires testing to determine the correct tool setting for the tool More information see file attached.