Professional Documents
Culture Documents
Giant Jelly Roll Tote: Fabric Requirements
Giant Jelly Roll Tote: Fabric Requirements
Fabric Requirements
• (7) 2½” × WOF strips for pieced exterior main panels
• ½ yd for exterior side panels
• ¼ yd for pocket outside and pocket lining
• ¾ yd for lining
• ½ yd for straps
• 1 yd lightweight fusible interfacing (optional)
• 1 yd fusible fleece or interfacing for exterior side panels and
exterior main panels
Instructions
• For all exterior pieces, fuse fabric to fusible fleece, quilt,
fold. Place diagram on fold and cut to shape.
• For pocket outside, fuse lightweight interfacing to fabric
then fold. Place diagram on fold and cut to shape.
• For straps, cut (3) 6” × WOF and piece together. Cut to
make (2) 6” × 50” strips.
No part of this pattern may be digitized or reproduced in any form unless given express written consent by Shabby
Fabrics. All designs, photographs, and images are protected by federal copyright law. All rights reserved.
page 1 of 6
Top of Pocket
YouTube.com/ShabbyFabrics
No part of this pattern may be digitized or reproduced in any form unless given express written consent by Shabby
Fabrics. All designs, photographs, and images are protected by federal copyright law. All rights reserved.
page 2 of 6
This diagram is for use with the
Giant Jelly Roll Tote
project featured on our YouTube channel:
YouTube.com/ShabbyFabrics
ld
place line on fo
page 3 of 6
This diagram is for use with the
Giant Jelly Roll Tote
project featured on our YouTube channel:
YouTube.com/ShabbyFabrics
page 4 of 6
This diagram is for use with the
Giant Jelly Roll Tote
project featured on our YouTube channel:
YouTube.com/ShabbyFabrics
page 5 of 6
This diagram is for use with the
Giant Jelly Roll Tote
project featured on our YouTube channel:
YouTube.com/ShabbyFabrics
page 6 of 6