Professional Documents
Culture Documents
v.6
anti-virus and/or system monitor software before installing Smaart.
With Keyfile in the registration dialog, then Browse to where the keyfile is
stored and open it.
v.6
Keyboard Shortcuts
Ctrl/Cmd means press the Control (Ctrl) key if you are using Windows, or the Com-
mand key (sometimes referred to as the “Apple” or “Flower” key) on a Mac. Similarly
Alt/Opt refers to the Alt key on a Windows keyboard or the Option Key on a Mac.
Left-Click refers to a Windows style two-button mouse and is equivalent to a regular
mouse click on a Mac.
General Controls Trace Shortcuts Range, Scale, and Zoom Shortcuts External Device Control
Frequency Response Mode = F Shift Front Trace Up Amplitude/Magnitude (y-axis) Range External Device Mode = X
IR Analysis = I (on selected graph) = Cmd/ Zoom Selected Graph In (vertically) = +/= Flatten Selected filter = Del
Spectrum Mode = S Ctrl + Up Arrow ( ) Zoom Selected Graph Out = – Increase Boost = Up Arrow ( )
Real-Time On/Off = O Shift Front Trace Down (on Move Selected Graph Up = PageUp Decrease Boost = Down Arrow ( )
Reseed Average Buffers = V selected graph) = Cmd/Ctrl + Move Selected Graph Down = PageDown Increase Frequency = Right Arrow ( )
Cycle Z-order on Selected Graph = Z Down Arrow ( ) Decrease Frequency = Left Arrow ( )
Frequency/Time (x-axis) Range
Instantaneous = Cmd/Ctrl + I Zoom Selected Graph In = Up Arrow ( ) Increase Bandwidth
High Contrast Colors = Alt/Opt + H Capture Reference Trace
Zoom Selected Graph Out = Down Arrow ( ) = Shift + Right Arrow ( )
= Space Bar
Move Selected Graph Left = Left Arrow ( ) Decrease Bandwidth
Help Move Selected Graph Right = Right Arrow ( )
Show Legend = Alt/Opt + L = Shift + Left Arrow ( )
Windows = F1 | Mac = Cmd + Shift + ?
Delete Selected Reference Phase Display Select Next Filter = Tab
Generator Shortcuts Trace (Legend dialog only) Unwrapped Phase Display = U Select Previous Filter = Shift + Tab
Generate Signal = G = Del Set Phase Range to:
Increase Signal Level = ] • 180° to –180° = Alt/Opt + Home
Decrease Signal Level = [ • 0° to 360° = Alt/Opt + End
Frequency Zooms Mouse
Spectrum Display Frequency Scale (Preset Frequency Ranges)
Narrowband = 5 | 1/24-Octave = 6
Locked Cursor Create New Filter or
Recall Zoom 1 = 1 | Recall Zoom 2 = 2
1/12-Octave = 7 | 1/6-Octave = 8
Shortcuts Grab Nearest (device dependent)
Recall Zoom 3 = 3 | Recall Zoom 4 = 4
1/3-Octave = 9 | Octave = 0 = Shift + Left-Click plot
Set at mouse cursor position Configure Frequency Zooms = Alt/Opt + Z
= Cmd/Ctrl + Left-Click on plot Select Filter Marker
Mouse Zooming
Delay Time = Left-Click on marker
Show Harmonics (on/even/ • Left-Click and drag on plot to
Auto-Locate Delay (Large) = L Change frequency and/or
odd/all/off ) = H select zoom range
Clear Delay (Reset to 0 ms) = F5 boost/cut = Left-Click and drag
• Release mouse button to set range
Recall Stored Delay Time Preset = A, B, C D, E Set at lowest point on the filter marker
• Click in margin of graph to reset range
Increase Delay Time = . (Period key) front trace = Shift + L
Decrease Delay Time = , (Comma key)
Set at highest peak on the
IR Analysis Window Only front trace = Shift + P Options Menu Shortcuts
Start/Stop Impulse Recorder = R
Track Peak (on real-time Audio I/O Options = Alt/Opt + A Spectrum Options = Alt/Opt + S
Assign Cursor Position to Current Delay Time
displays) Delay Options = Alt/Opt + D Volume (Recording) Control (Windows
= Shift + Space Bar
= Cmd/Ctrl + Shift + P Frequency Response Options = Alt/Opt + F Only) = Alt/Opt + P
Assign Locked Cursor to Delay Preset
High Contrast Colors = Alt/Opt + H External Device Information = Alt/Opt + X
= Cmd/Ctrl + A, B, C, D, E Remove Locked Cursor
IR Analysis Options = Alt/Opt + I Frequency Zoom Setup = Alt/Opt + Z
Save Impulse Response = Cmd/Ctrl + S = Cmd/Ctrl + X
Open Legend Dialog = Alt/Opt + L Show LEQ = Alt/Opt + L