Professional Documents
Culture Documents
TLSD 1-DK
2. Installation ....................................................................................8
2.1 Installation of new lubricators ..............................................................9
2.2 Replacement of canisters ....................................................................11
3. Troubleshooting ...........................................................................21
Original instructions
EN 3
Safety recommendations
MP5514
MSDS
www.skf.com/lubrication
+25°C
(77ºF)
+15°C
(59ºF)
4 EN
EU Declaration of Conformity
TLSD 1-DK
Automatic single point lubricator Cabled TLSD
EN 61000-6-3:2007/A1:2011/AC:2012:
Electromagnetic compatibility (EMC). Generic standards.
Emission standard for residential, commercial and light-industrial
environments.
EN 61000-6-2:2005/AC:2005:
Electromagnetic compatibility (EMC). Generic standard.
Immunity for industrial environments.
EN 61000-4-2: ESD
EN 61000-4-3: HF Immunity
EN 61000-4-4: EFT
EN 61000-4-5: Surge
EN 61000-4-6: CDN/Clamp Injection
EN 61000-4-8: Power Magnetic field
EN IEC 63000:2018
Technical documentation for the assessment of electrical and electronic
products with respect to the restrictions of hazardous substances.
EN 5
UK Declaration of Conformity
TLSD 1-DK
Automatic single point lubricator Cabled TLSD
EN 61000-6-3:2007/A1:2011/AC:2012:
Electromagnetic compatibility (EMC). Generic standards.
Emission standard for residential, commercial and light-industrial
environments.
EN 61000-6-2:2005/AC:2005:
Electromagnetic compatibility (EMC). Generic standard.
Immunity for industrial environments.
EN 61000-4-2: ESD
EN 61000-4-3: HF Immunity
EN 61000-4-4: EFT
EN 61000-4-5: Surge
EN 61000-4-6: CDN/Clamp Injection
EN 61000-4-8: Power Magnetic field
EN IEC 63000:2018
Technical documentation for the assessment of electrical and electronic
products with respect to the restrictions of hazardous substances.
6 EN
1. Technical data
Designation TLSD 1-DK
Automatic single point lubricator Cabled TLSD
Maximum ratings
Voltage supply (VSS-GND) 7 V to 35 V
Current supply up to 1.5 A
Quiescent current <10 mA
(sleep current)
Relay maximum voltage 35 V
Relay minimum current 100 mA
Ambient temperature range -20 to 50 °C (-4 to 122 °F)
Max. working pressure 5 Bar
Cable
Length 550 mm
Diameter 4.8 mm Max.
Wire size 24 AWG 7/32 (0.25 mm2)
WARNING:
Should the power loss the dispense rate quantity calculation should be
adjusted.
EN 7
2. Installation
This user manual provides technical information about:
8 EN
2.1 Installation of new lubricators
For installation at the application follow the steps:
EN 9
4 Place the drive unit on top of the full grease
cannister and make sure the teeth of both
parts are engaged.
The spindle head should now be inside of the
motor coupler.
10 EN
2.2 Replacement of canisters
In case the lubricator canister empty, the cannister should be replaced with a
new full one.
3
Remove the drive unit cap from the
lubricator.
Continue with cleaning the lubrication point from dirt and old grease in such
a way that the dirt is not entering the lubrication point itself, see paragraph
† 2.1 step 1.
EN 11
71 mm
(2.8 in)
0,70 kg 0.83 kg
(1.5 lb) (1.8 lb)
TLSD .../125 TLSD .../250
250
ø 63 mm
125 ø 63 mm
(2.5 in)
(2.5 in)
250 ml
8.5 fl. oz.
125 ml
157 mm (6.2 in)
250
109mm (4.2 in)
125
R 1 /4 R 1/4
ø 58 mm
(2.7 in)
45 mm
(1.5 in)
AF 21 mm
G 1 /4
12 EN
31
1 /2 / 3
4/6/8
9 / 10/ 12
Max. Max. months
5 bar 3 bar
(72 psi) (43 psi)
IP 41
EN 13
0°C
(32ºF)
0°C
(32ºF)
14 EN
LAPC 63
TLSD 1-SP(V)
PTFE
tape
TLSD 1-SP(V)
LAPC 13
Lo
c
tit
e2
43
LAPC 63
TLSD 1-SP(V)
EN
LAPC 13
15
20°C
(68ºF)
>50°C
(>122ºF)
<0°C
(<32ºF)
TLSD 1-SPV
LAPF ...
16 EN
1 LAPG 1/4
2
LAGG 400B
LA
GH
40
0
10
77
LAGG ... 60
0
TL
GH
1
3 4
EN 17
11
125
31
250
RST
12 1
10 2
9 3
8 4
6
DialSet
skf.com/lubrication
mapro.skf.com/dialset
12 13
MAX MAX
A 31 date
18 EN
LAPN 1/8 LAPN 1/4 LAPN 1/4UNF LAPN 3/8 LAPN 1/2 LAPN 6
G 1/8 G 1/4 1/4”-28 UNF M6
G 3/8 G 1/2
8 mm
8 mm
90º 45º
50 mm (1.9 in)
G1
90
/4
º
º
45
/4
G1
EN 19
TLSD 1-SP TLSD 1-SPV
G 1/4 G 1/4
G 1/4 G 1/4
63 mm
(2.5 in)
13 R 1/4
.6 m
5 inm
(0.
)
G 1/4 G 1/ 4
G 1/4
G 1/8
20 mm (0.8 in)
20 mm (0.8 in)
LAP
B3
x10
E1
10
0m
40 60 m
mm (3.
m 9 in
mm
(2. m
(1. m 4 in
0m ) ) mm
6 in) 30 2 in) ) 3 2 in 30 2 in)
(1. (1. (1.
20 EN
3. Troubleshooting
EN 21
RU РУССКИЙ ДОПОЛНИТЕЛЬНАЯ ИНФОРМАЦИЯ
ООО «СКФ»
121552, город Москва, улица Ярцевская, д.19, Блок А, Этаж 7.
22 EN
The contents of this publication are the copyright of the publisher and may not be reproduced
(even extracts) unless prior written permission is granted. Every care has been taken to
ensure the accuracy of the information contained in this publication but no liability can be
accepted for any loss or damage whether direct, indirect or consequential arising out of the
use of the information contained herein.
MP5514 EN · 2021/10